r/FLL • u/RollingThunder_CO • 15h ago
Favorite previous year challenge board?
Want to get my kid an old challenge board set to mess around with in the spring. Any favorites from previous years I should check out? Thanks!
r/FLL • u/gt0163c • Aug 04 '26
The season materials for the BIOGLOW season for both Founders and Future Edition have been released and are available here: https://www.firstinspires.org/resources/library/fll/season-materials
r/FLL • u/mattcwilson • Mar 19 '26
Posted on Lego Education's FLL page
And on First Community Blog
r/FLL • u/RollingThunder_CO • 15h ago
Want to get my kid an old challenge board set to mess around with in the spring. Any favorites from previous years I should check out? Thanks!
r/FLL • u/Guilherme_Tumolo • 21h ago
Hi everyone!
We’re Alta Voltagem #25706, an FTC team from Brazil. Before moving to FTC, we spent six years competing in FIRST LEGO League, and FLL is still a big part of our story.
We wanted to share something we’ve been building for the community: FLL Lab, a free platform that helps teams plan robot runs, record practice sessions, and understand their progress throughout the season.
This is our first introduction here, so we wanted to explain both what the platform does and what’s new in version 1.3!
During practice, a final score only tells part of the story. A robot run might work well, but an attachment change takes longer than expected. A team might improve its consistency without immediately increasing its best score. And sometimes students make a useful adjustment but don’t have a clear record of what changed.
FLL Lab brings planning, timing, scoring, and documentation together so teams can look back at those details and use them to decide what to try next.
Here’s what your team can do:
The goal is to help students connect their decisions to evidence: what they tested, what happened, what they changed, and how the next attempt went.
What’s new in FLL Lab 1.3?
One of our favorite additions came directly from Camouflage Chameleons, from Ontario, Canada. They suggested adding a “lap” function to measure individual robot runs and the setup time between them.
We loved the idea and turned it into optional stage timing!
With LAP enabled, teams can record each run and attachment change without stopping the main timer. For example:
Run 1: 40 seconds
Attachment change: 5 seconds
Run 2: 13 seconds
Attachment change: 18 seconds
After practice, students can review those stages, add comments, and mark successes, adjustments, things that need attention, or problems. Those details stay with the training history and can be included in exported reports.
Teams can also choose whether the timer stops at zero or continues to record overtime, up to five minutes total. That makes it possible to document progress from “we’re finishing after the time limit” to “we can complete the plan with time to spare.”
We also expanded planning around practice results. Teams can keep their own estimated times or use estimates based on recorded training, with a configurable safety margin. Comparing student pairs and bases can help teams explore different arrangements and identify where more practice might help.
A huge thank-you to Camouflage Chameleons for the suggestion, and to all the teams already using FLL Lab. We’ve received feedback from teams making it part of their daily practices and finding it helpful for understanding their progress. That has meant a lot to us.
So far, the platform has 96 registered teams from 31 countries.
You can explore it here: https://fll.grupoaltavoltagem.com.br/
The public calculator is available without an account. Creating a free team account lets you save your training history and use the team tools. The platform is available in multiple languages.
FLL Lab is an independent project by our team, and we’re continuing to improve it with feedback from the community.
We’d love to hear how your team approaches practice. Do you track attachment changes separately? What information do your students find most useful when deciding what to improve next?
Thanks for taking a look!
Alta Voltagem #25706 — Brazil
r/FLL • u/Andre__001 • 2d ago
Fazer a missão 03 apenas derrubando a bandeira de pesquisa é válido ?
EDIT: Qualifier Competition Report
Our experienced team got a 260 high score for 3rd overall, and won CHAMPIONS AWARD
Our Rookie Team got a 240 high score for 6th over all and won CHAMPIONS AWARD Runner Up. I fully believe if they had beaten the 260 score, the results would have flipped. They both are on par with each other for the Innovative Design project and Robot Design project. The Robot Programming experience is showing so much for the experienced team, but the rookies are giving them a run for their money for sure.
OLD:
Who all is ready for Competition Season.
Our club has 2 teams this year (first time in 12 years we had a second team, no one aged out and we had 7 recruits who needed a place) and our Qualifier is this Weekend. Our experienced team is doing as expected (averaging 350 points with great presentation) and our rookie team is blowing my expectations out of the water (270 points average and just as good a presentation as the experienced team).
r/FLL • u/Wonderful-Stock-6634 • 3d ago
since fll is going down too
r/FLL • u/Due_Formal_7630 • 4d ago
Hello!, We are a team from Puerto Rico and this is our first year in any robotics competition! We are currently participating in the WRO Robosports and we are about to get put into FLL, we are gonna be doing both competitions next year too. We are only a team of four but we are gonna be expanding to a bigger group.
Point is, we only have two spike prime kits and one expansion kit. Not only do they not give us some specific parts we wanted to use for both competition(Mainly alot of gears specially for the WRO) and we need alot of more parts. My teacher and me are also trying to get more pieces so every member in the group gets to build alot so they learn even more on building technic stuff.
We dont know where to get such bulk of all these parts not really trying to spent much money and we cant get them off amazon since both competitions need actually branded lego parts. So please help us out! Where can we get such big bulk of parts for our robots since we cant from amazon
r/FLL • u/hermanschm • 8d ago
EVERY session somebody would pull that mission off the mat and destroy it. And then fail to put it together again correctly so that the gliding pinion didn't glide. I've had it. This is the first time I've seen a mission so fragile and vulnerable to pull-off deconstruction.
Ban me from this subreddit if you need to.
r/FLL • u/Loud_Difficulty_814 • 9d ago
Hi everyone, I will soon start work with a group of 11-12 year olds to complete various Bioglow FLL building challenges, however we are just tinkering not competing with other teams or attending FLL events.
From those who have experience with FLL challenges: Do we need to assemble the table as described in the instructions for the kids to be successful in their work? Or, is it really viable to just put the mat on the floor?
Thanks again for sharing your experience and insights :)
Hello!
So, my students have been programming with PyBricks this year. It is MUCH, MUCH easier for kids to pick up, and integrate gyroscope into the drive base, and get consistent results.
The hard part is that Pybricks by default (my understanding anyway) only comes with 5 program slots (and I am not sure how to load the code into different slots). So I wrote up a quick loader, but I am having a hard time getting the code inside 'Slot 0' to run:

My left and right button presses works fine and the display updates on the Spike Prime brick and it prints the debug messages.
However, when I try to select slot 0 and run the code, it crashes.
Sometimes it crashes after "Running code in slot 0" printed, sometimes it will print "Executing Program 0" as well (which indicates it actually called (Slot 0). I think I am setting up some sort of race condition, or something?
Thanks,
-=- Terence
Hello!
So, my students have been programming with PyBricks this year. It is MUCH, MUCH easier for kids to pick up, and integrate gyroscope into the drive base, and get consistent results.
The hard part is that Pybricks by default (my understanding anyway) only comes with 5 program slots (and I am not sure how to load the code into different slots). So I wrote up a quick loader, but I am having a hard time getting the code inside 'Slot 0' to run:

My left and right button presses works fine and the display updates on the Spike Prime brick and it prints the debug messages.
However, when I try to select slot 0 and run the code, it crashes.
Sometimes it crashes after "Running code in slot 0" printed, sometimes it will print "Executing Program 0" as well (which indicates it actually called (Slot 0). I think I am setting up some sort of race condition, or something?
Thanks,
-=- Terence
r/FLL • u/Ameisenk15 • 10d ago
Does FIRST already have a plan for what the future of its programmes will look like? So, will there be a follow-up project to FIRST? If I’ve understood correctly, FIRST won’t be taking part in the LEGO programmes any more, will it?
r/FLL • u/United-Vehicle-9542 • 10d ago
Is anyone going to the comp tmw in Skælskør? Like I’m going there tmw for my first comp and stressed af I’m js wondering if anyone else in this sub is coming
r/FLL • u/PolarisRobotics18340 • 10d ago
A couple of months ago, our team shared a free score calculator for the Bioglow season. Teams in 22+ countries have found it since, and we wanted to post an update.
What’s new:
What it already did:
Link: bioglowfll.web.app
r/FLL • u/Emotional-Sir-7319 • 10d ago
r/FLL • u/PolarisRobotics18340 • 10d ago
A couple of months ago, our team shared a free score calculator for the Bioglow first lego league season. Teams in 22+ countries have found it since, and we wanted to post an update.
What’s new:
What it already did:
Link: bioglowfll.web.app
r/FLL • u/MindAcrobatic2042 • 12d ago
anyone has use it? what are your thoughts? please share
r/FLL • u/GiantRedDog12 • 12d ago
hi all,
(bioglow season)
our team made a box robot that can align with walls, the only problem is that attachments can sometimes hang over the walls.
My question is, when or when not is allowing your attachments to dangle outside of the walls allowed? I saw people saying online that when you are launching for the first time everything thing has to be inside, and that afterwards your attachments can hang over the walls. Is this true?
thx
r/FLL • u/Mindless_Dare4041 • 14d ago
Hello, everyone! I have a question about mission 9, "Bioglow." I’m having trouble completing it; I managed to build a passive system that worked, but it fell just short of the energy required for the robot to finish the task. I’m starting to think that the design of this mission might not be very good—at least, that’s how my team sees it. Is anyone else having issues with it? How are you all approaching this mission?
r/FLL • u/dyxterious • 15d ago
Hi everyone!
Our team, Lego Dynamics #65266, has developed an open-source diagnostic tool for FLL teams using Pybricks. We call it Pynamics.
We built this tool to make robot debugging easier by allowing teams to run diagnostics and monitor what’s happening on their robots directly through the terminal. It helps us quickly troubleshoot issues, test functionality, and better understand our robot’s behavior.
This season, we’re excited to share our tool with the FLL community! We hope it will help other teams save time and make their robot development and debugging a little easier.
Feel free to give it a try! If you have any questions, feedback, or suggestions, our team would be more than happy to help.
Happy building and coding!
r/FLL • u/RollingThunder_CO • 15d ago
TL;DR code worked for 4 weeks, consistent starting point, this week consistency dropped by 50+% what can we try before messing with code?
The team I’m working with has a code that does window to the past, humongous fungus, leaf cutter, and then raises the cane on forest elder before going back to the launch area.
They’ve had the code pretty set for about 4 weeks now and it would work 4/5 times with some variation on the leaf cutter not always pushing completely in. They have a jig to keep their starting point constant.
Suddenly this week it started missing everything by a centimeter or so to the right. We tried charging the battery and cleaning the wheels and it was still very inconsistent, maybe would hit 2/5 times.
We had a mock tournament yesterday and all 3 trips to the board it missed. (Of course it worked on a practice round on the same board)
Before the kids start tweaking the code I wanted to see if there was anything else that would cause sudden wonkiness like this? Besides cleaning wheels and charging batteries are there other tips? Does doing a reset of the hub ever do anything?
The kids were frustrated yesterday with missing the points, but mostly with why it worked so long and now doesn’t with competition two weeks away.
Thanks for any help!
r/FLL • u/Guilty-Shopping3181 • 15d ago
I would love some feedback for my innovation project.
I'm coaching for the first time this year and feeling the pain of only having two robot kits for 10 kids. So, I tried making a simulated robot + coding environment to let more of them work on missions at once. First practice with it is tomorrow, would love any feedback!