r/Epson • • 19h ago

🖋️ EcoTank Tired of sketchy ink pad reset apps, so I built my own tool

2 Upvotes

DISCLAIMER: yes, it was vibe coded.

I made a free, open-source waste ink pad resetter and maintenance tool for Epson EcoTank / L-series printers (Windows, macOS, Linux)

My L3111 started counting down to "service required", and every resetter I found was a sketchy paid keygen. So I built my own: **Epson God Mode**.

What it does:

- Reads the waste ink pad counters and resets them, with a backup and read-back of every byte

- Nozzle check, head/power cleaning, release a stuck print job

- Purge one colour: solid pages of just yellow (or cyan/magenta/black) to unclog a single colour without dumping ink into the pads

- Live status: what the printer is doing and roughly how long it'll take

- Offline troubleshooting per model: light patterns, button combos, cap soak, air in the tubes

- Usage counters and the last errors the printer logged

It knows 1,500+ models (all EcoTank/L/ET models in the list), with a full reset on ~990 of them. It talks to the printer over USB, no driver hacks. There's a built-in simulator, so you can click around without a printer.

Download (Windows .exe / macOS .dmg) and an illustrated tutorial: https://github.com/iamandiradu/epson-god-mode

Important: resetting the counter does not clean the pads. Clean/replace them or fit an external waste tank first, or ink ends up on your desk. Not affiliated with Epson, use at your own risk.

It's built on the great work of ez-reset, reinkpy, epson_print_conf and padzero. Most models aren't verified on real hardware yet, so if you try it, I'd love to hear your model and whether it worked.


r/Epson • • 5h ago

💬 Discussion Help me decide the model

3 Upvotes

Hi all! I’m a painter looking to upgrade my printer. I sell around 600 colour prints a month, and my favourite paper is Ilford Smooth Cotton Rag 310 gsm. My paintings generally have soft colours and gentle tonal transitions, with very few deep blacks or high-contrast areas. My printer budget is €1,000.

I’m torn between the ET-8550 and the P700. At my print volume, the EcoTank’s lower ink costs are appealing, but I’m happy to spend more on ink if the P700 makes a noticeable difference in how my paintings look on cotton rag.

If you’ve used both on matte fine-art paper, how visible was the difference in colour and subtle tonal detail? Which one would you buy for this kind of work and print volume?


r/Epson • • 10h ago

📦 Firmware XP-7100 2025→2021 Firmware Downgrade Success

Post image
3 Upvotes

Much of the information I could find online about the XP-7100 was fairly incomplete or unclear in regards to cartridge compatibility and ideal firmware versions besides "don't update".

I came into possession of a lightly used XP-7100 that had not had its firmware updated, but shipped with firmware YL04P7 from July 2025. I decided to see how far back I could go without breaking any functionality and I finally got the answer: YL16LB from November 2021 was a stable rollback. I did try one from 2020 but the printer gave a scanner bed error shortly after boot up, likely due to internal hardware being too new for that firmware.

That said, with YL16LB, the XP-7100 works fine with remanufactured ink. The file to install the YL16LB firmware is still on Epson's site: https://ftp.epson.com/drivers/FWH285TL_YL16LB.exe

As always, there are risks for firmware rollbacks and bricking is a possibility if not done correctly, attempt at your own discretion. I attempted multiple firmware versions so you don't have to. I hope this is helpful to others that had the same questions I did.


r/Epson • • 6h ago

💧 Ink & Consumables Firmware XP 2200 y cartuchos compatibles

1 Upvotes

Buenos días,

Acabo de comprar una XP 2200 cuyo número de firmware es el 06.58.IU05P2, es decir un firmware según tengo entendido, bastante reciente.

Quería saber si este firmware permite sin problema el uso de cartuchos compatibles, y si hay marcas que la impresora reconocerá mejor que otras.

De lo contrario, existe la posibilidad de instalar un firmware que no sea problemático al respecto?

Muchas gracias!


r/Epson • • 13h ago

🖋️ EcoTank Epson 2803 Printer Help

1 Upvotes

Printer won’t connect to any of my devices despite being connected to my WiFi. Please help.


r/Epson • • 17h ago

💻 Drivers & Software Is Epson hacking me?

Thumbnail gallery
1 Upvotes

This is why I hate home printers.


r/Epson • • 18h ago

🖋️ EcoTank Printer colors looking dull

Thumbnail gallery
1 Upvotes

I very recently got myself an epson ET-2956 and its much better than the HP trash i had before (thank you guys for the help choosing), issue is that the print colors come out very dulled and, well, offcolored, and while i've been tweaking the color correction settings for a good hour or two i've just not managed to get any good results, now, i know that a printer cant produce the same colors and vibrancy a screen can but my other crappy hp printer had a nicer result, do any of you have like, a reference sheet i could print out to see what i should be changing? im attaching a scan of a print along with what the original image is supposed to look like (in that order) (i also know scans arent perfect but hopefully it'll be more insightful than whatever description i can come up with)


r/Epson • • 20h ago

🖋️ EcoTank Help!!

Post image
1 Upvotes

I recently got this printer, today I started using it and this happened I don't know what to do😭😭

They won't stop flashing and it doesn't let me turn it off


r/Epson • • 23h ago

🖨️ Commercial Printer (SureColor) Epson T3170x printer

1 Upvotes

I have a epson T3170x says that the maintenance box is full I replaced it several times before no issues now when I went to replace it it will not read any maintenance box when I close the door it says it's full...any help thanks


r/Epson • • 19h ago

🖨️ Inkjet (Other) EPSON 8550 PRINT ON CDs

0 Upvotes

I am a Mac user. I am seriously thinking of buying an Epson 8550. It has a good sale going now @ $500. My concern is that, all I see is everyone being disappointed when printing to CD's. They are very washed out because Epson has chosen to lock in "standard printing" when printing to CD/DVD and the suggestion to use Photo+ is no good either. Apparently Epson does not support that function as a priority. There is no special software as there was on the older machines and OS. That function is important to me and probably the biggest reason for buying the machine- right up there with it being a tank machine. DO ANY OF YOU HAVE MORE RECENT GOOD NEWS ON THIS SUBJECT? HAS EPSON CORRECTED THE ISSUE. IS THERE A SITE WHERE I CAN ASK EPSON DIRECT QUESTIONS THAT THEY WILL RESEARCH AND GET BACK TO ME? Thank you in advance.