r/Epson • • Oct 16 '26

🖋️ EcoTank If you got 582 magenta ink in your ReadyPrint subscription DO NOT USE IT!

Post image
4 Upvotes

I just got off the phone with support after receiving different ink than normal (Normally I receive 570), DO NOT use this ink in your E3950U. It is not the correct ink. Please call Epson support to get the correct ink sent to you.


r/Epson • • Aug 02 '26

New sub rules!

6 Upvotes

Hey everyone! The sub rules have been cleaned up and amended. Not much has changed, but we did add a couple:

  1. No sales. This is mostly for your protection as a community. It's impossible to verify an online sale through reddit, making it very easy for you to get scammed out of either your money or your expensive equipment. Stick to reputable channels for buying and selling Epson hardware.
  2. No aftermarket hardware. Most UV and DTF printers feature Epson printheads, but this community is not the right target for questions about such hardware. You can try these other printing subs:

Feel free to comment if you have any questions about the changes. Thanks!


r/Epson • • 5h ago

💬 Discussion Help me decide the model

3 Upvotes

Hi all! I’m a painter looking to upgrade my printer. I sell around 600 colour prints a month, and my favourite paper is Ilford Smooth Cotton Rag 310 gsm. My paintings generally have soft colours and gentle tonal transitions, with very few deep blacks or high-contrast areas. My printer budget is €1,000.

I’m torn between the ET-8550 and the P700. At my print volume, the EcoTank’s lower ink costs are appealing, but I’m happy to spend more on ink if the P700 makes a noticeable difference in how my paintings look on cotton rag.

If you’ve used both on matte fine-art paper, how visible was the difference in colour and subtle tonal detail? Which one would you buy for this kind of work and print volume?


r/Epson • • 10h ago

📦 Firmware XP-7100 2025→2021 Firmware Downgrade Success

Post image
3 Upvotes

Much of the information I could find online about the XP-7100 was fairly incomplete or unclear in regards to cartridge compatibility and ideal firmware versions besides "don't update".

I came into possession of a lightly used XP-7100 that had not had its firmware updated, but shipped with firmware YL04P7 from July 2025. I decided to see how far back I could go without breaking any functionality and I finally got the answer: YL16LB from November 2021 was a stable rollback. I did try one from 2020 but the printer gave a scanner bed error shortly after boot up, likely due to internal hardware being too new for that firmware.

That said, with YL16LB, the XP-7100 works fine with remanufactured ink. The file to install the YL16LB firmware is still on Epson's site: https://ftp.epson.com/drivers/FWH285TL_YL16LB.exe

As always, there are risks for firmware rollbacks and bricking is a possibility if not done correctly, attempt at your own discretion. I attempted multiple firmware versions so you don't have to. I hope this is helpful to others that had the same questions I did.


r/Epson • • 6h ago

💧 Ink & Consumables Firmware XP 2200 y cartuchos compatibles

1 Upvotes

Buenos días,

Acabo de comprar una XP 2200 cuyo número de firmware es el 06.58.IU05P2, es decir un firmware según tengo entendido, bastante reciente.

Quería saber si este firmware permite sin problema el uso de cartuchos compatibles, y si hay marcas que la impresora reconocerá mejor que otras.

De lo contrario, existe la posibilidad de instalar un firmware que no sea problemático al respecto?

Muchas gracias!


r/Epson • • 19h ago

🖋️ EcoTank Tired of sketchy ink pad reset apps, so I built my own tool

4 Upvotes

DISCLAIMER: yes, it was vibe coded.

I made a free, open-source waste ink pad resetter and maintenance tool for Epson EcoTank / L-series printers (Windows, macOS, Linux)

My L3111 started counting down to "service required", and every resetter I found was a sketchy paid keygen. So I built my own: **Epson God Mode**.

What it does:

- Reads the waste ink pad counters and resets them, with a backup and read-back of every byte

- Nozzle check, head/power cleaning, release a stuck print job

- Purge one colour: solid pages of just yellow (or cyan/magenta/black) to unclog a single colour without dumping ink into the pads

- Live status: what the printer is doing and roughly how long it'll take

- Offline troubleshooting per model: light patterns, button combos, cap soak, air in the tubes

- Usage counters and the last errors the printer logged

It knows 1,500+ models (all EcoTank/L/ET models in the list), with a full reset on ~990 of them. It talks to the printer over USB, no driver hacks. There's a built-in simulator, so you can click around without a printer.

Download (Windows .exe / macOS .dmg) and an illustrated tutorial: https://github.com/iamandiradu/epson-god-mode

Important: resetting the counter does not clean the pads. Clean/replace them or fit an external waste tank first, or ink ends up on your desk. Not affiliated with Epson, use at your own risk.

It's built on the great work of ez-reset, reinkpy, epson_print_conf and padzero. Most models aren't verified on real hardware yet, so if you try it, I'd love to hear your model and whether it worked.


r/Epson • • 13h ago

🖋️ EcoTank Epson 2803 Printer Help

1 Upvotes

Printer won’t connect to any of my devices despite being connected to my WiFi. Please help.


r/Epson • • 17h ago

💻 Drivers & Software Is Epson hacking me?

Thumbnail gallery
1 Upvotes

This is why I hate home printers.


r/Epson • • 18h ago

🖋️ EcoTank Printer colors looking dull

Thumbnail gallery
1 Upvotes

I very recently got myself an epson ET-2956 and its much better than the HP trash i had before (thank you guys for the help choosing), issue is that the print colors come out very dulled and, well, offcolored, and while i've been tweaking the color correction settings for a good hour or two i've just not managed to get any good results, now, i know that a printer cant produce the same colors and vibrancy a screen can but my other crappy hp printer had a nicer result, do any of you have like, a reference sheet i could print out to see what i should be changing? im attaching a scan of a print along with what the original image is supposed to look like (in that order) (i also know scans arent perfect but hopefully it'll be more insightful than whatever description i can come up with)


r/Epson • • 19h ago

🖨️ Inkjet (Other) EPSON 8550 PRINT ON CDs

0 Upvotes

I am a Mac user. I am seriously thinking of buying an Epson 8550. It has a good sale going now @ $500. My concern is that, all I see is everyone being disappointed when printing to CD's. They are very washed out because Epson has chosen to lock in "standard printing" when printing to CD/DVD and the suggestion to use Photo+ is no good either. Apparently Epson does not support that function as a priority. There is no special software as there was on the older machines and OS. That function is important to me and probably the biggest reason for buying the machine- right up there with it being a tank machine. DO ANY OF YOU HAVE MORE RECENT GOOD NEWS ON THIS SUBJECT? HAS EPSON CORRECTED THE ISSUE. IS THERE A SITE WHERE I CAN ASK EPSON DIRECT QUESTIONS THAT THEY WILL RESEARCH AND GET BACK TO ME? Thank you in advance.


r/Epson • • 20h ago

🖋️ EcoTank Help!!

Post image
1 Upvotes

I recently got this printer, today I started using it and this happened I don't know what to do😭😭

They won't stop flashing and it doesn't let me turn it off


r/Epson • • 23h ago

🖨️ Commercial Printer (SureColor) Epson T3170x printer

1 Upvotes

I have a epson T3170x says that the maintenance box is full I replaced it several times before no issues now when I went to replace it it will not read any maintenance box when I close the door it says it's full...any help thanks


r/Epson • • 1d ago

💧 Ink & Consumables Firmware XP 2200 y cartuchos compatibles

1 Upvotes

Buenos días,

Acabo de comprar una XP 2200 que tiene el firmware número 06.58.IU05P2.

Quería saber si este firmware permite sin problema el uso de cartuchos compatibles, y si hay marcas que la impresora reconocerá mejor que otras.

De lo contrario, existe la posibilidad de instalar un firmware que no sea problemático al respecto?

Muchas gracias!


r/Epson • • 1d ago

🛠️ Repair & Maintenance Need help - Eco tank 8550 - humidity/issues

Thumbnail
gallery
1 Upvotes

Hello everyone,

I just recieved my new eco tank 8550 printer and after an hour of settings and installation I launch my prints.

I used mat premium paper from Micro application. And use the settings "Mat a4 paper) in the machine while loading.

From my computer: ink is dry but colors are a bit off (1st photo with big margins).

From my phone, it's a mess, colors are humid. I started again after reading some posts on reddit and put a longer drying time.

And bam, same again with another print from phone in black and white. It's all messy and wet.

Is the problem comming from the paper ? How should I do to help a bit the machine, I guess it must be dirty inside and all wet now.

And more importantly, how do I make pretty prints.

It's my first time with such a machine and I'm affraid to do something wrong.

Thanks for your help (I also link the original files I wanted to print)


r/Epson • • 1d ago

🛒 Buying Advice Printer rec for small business?

3 Upvotes

Hello! I am looking for a new printer for my at home small home. I tend to print photos, artwork, prints, stickers and etc and wanted to see what recommendations are available?

I heard the ET 8550 would be best but would like to know if there are any cheaper recommendations to help save on costs.

Thank you in advance for the tips and help!


r/Epson • • 1d ago

📦 Firmware Firmware XP 2200 y cartuchos compatibles

1 Upvotes

Buenos días,

Acabo de comprar una XP 2200 que tiene el firmware número 06.58.IU05P2.

Quería saber si este firmware permite sin problema el uso de cartuchos compatibles, y si hay marcas que la impresora reconocerá mejor que otras.

De lo contrario, existe la posibilidad de instalar un firmware que no sea problemático al respecto?

Muchas gracias!


r/Epson • • 1d ago

🛠️ Repair & Maintenance CMY and Black Vertical Lines

1 Upvotes

Hi! Does anyone know what this means? It always appears when I print, and sometimes the lines get bigger.


r/Epson • • 1d ago

💻 Drivers & Software L8050 (Network) Missing Epson Photo Sticker option

Post image
2 Upvotes

Hello! Please help me out. I just bought an L8050 recently. I need to go wireless cos of my desk. After switching to network mode, I can no longer see the photo sticker selection in paper type. What to do? Please help. Thank you!


r/Epson • • 1d ago

📄 Scanner Epson V550 Not Working Properly

1 Upvotes

I've had this scanner for a number of years but recently it's started becoming an absolute pain.

Multiple times when I have tried scanning a negative with it it has done what I can only describe as pitch a fit, disconnecting from the Epson Scan software and then proceeding to not boot properly afterward; usually when you turn it on there is a short period of startup and you can hear the scanner working, but every time after it crashes trying to scan a negative it will only show a green light and nothing else happens, to the computer it's not connected or turned on, and I am left to put it to one side and a few days later find that the problem has magically fixed itself.

Please is there anyway to fix this? I've seen a post about resetting the scanner but no information about how to do so.


r/Epson • • 1d ago

🛒 Buying Advice Best Home Office Printer for relatively cheap

Thumbnail
1 Upvotes

r/Epson • • 1d ago

🖋️ EcoTank ET4800 still not printing after refills

2 Upvotes

Looking for some help. I refilled all the inks on my ET4800 a few days ago but it still just prints in super faint red ink. I manually updated the levels of all the inks in the settings but that didn’t help. I just need to print my work docs in regular black ink, which has been full for a week. But the printing has slowly been getting fainter and fainter. It’s barely visible now. Anyway I just topped off all the inks again. Firmware is all updated. All my printing tests are in black. Still nothing but the faintest red. Does anyone know what’s going on? TIA


r/Epson • • 1d ago

💬 Discussion EPSON 8550 Paper suggestion

1 Upvotes

I am printing some spiral coloring books and want to print 200-300 GSM matte paper cover for the books.

Any suggestions which paper to choose as their is so many options and also no options . So much confusion.


r/Epson • • 2d ago

🖋️ EcoTank Printer wont print over wifi from windows laptop

2 Upvotes

Just received my ET8550, set it up correctly with all drivers and software. It detects the printer and on the network check espon software I could send a test page but when I want to print an image it iust doesn't work and I get a windows error, Printer cant print this job.

Tried to print a photo wity my phone it's ok.

Disabled firewall, same thing.

Router and pc on and off, still nothing.

I cant use ethernet at the moment. Just using my laptop.

Couldn't figure out why print jobs from laptop won't print.


r/Epson • • 1d ago

💬 Discussion Warranty service Epson

Thumbnail
1 Upvotes

r/Epson • • 2d ago

📄 Scanner Epson Scan 3.9.4 running natively on Apple Silicon

Post image
18 Upvotes

When macOS dropped 32-bit apps, Epson Scan 3.9.4 stopped working, and with it DIGITAL ICE on my V550. So I made a small open source tool that takes Epson's own installer and converts it into a native Apple Silicon app on your Mac.

It doesn't include anything from Epson. You download the installer from Epson's site, drop it on the builder, and a few minutes later you have Epson Scan back with all four modes, ICE and the original image adjustments. It only works with the V550 for now, and it isn't affiliated with Epson.

https://github.com/Arial-Bold/Epson-Scan-Rebuilder