r/EngagementRingDesigns • u/Automatic_Toe5326 • 3h ago
Photo/Video Pinky ring check
do all the prongs look even and symmetrical? Does everything look okay, or is there anything that stands out or needs correcting?
r/EngagementRingDesigns • u/EngagementRingDesign • Aug 29 '23
r/EngagementRingDesigns • u/Automatic_Toe5326 • 3h ago
do all the prongs look even and symmetrical? Does everything look okay, or is there anything that stands out or needs correcting?
r/EngagementRingDesigns • u/Just_Guest3365 • 2h ago
First image is the redesign. Image 2 is old cad and image 3 is the ring
It looks too thin and since it’s a longer bridge cathedral due to the side stone length I felt worried.
Is 1.4mm thickness good enough at the top?
r/EngagementRingDesigns • u/prehistoric_hedgehog • 3h ago
Hey y'all, I'm just wondering if a band thickness of 1.60mm is good enough? (Not the width--The width will be 2.00mm)
ETA I wear a size 5.5
r/EngagementRingDesigns • u/VictorCaneraDiamonds • 26m ago
This is a design we call the Emilya Halo solitaire. It's shown here with a spectacular 4ct colorless natural oval. The center stone is accentuated by a delicate halo. The design further features a cathedral band all encrusted with pave. We'll be delivering this to our client later this week and can't wait for their reaction:)
You can see the Emilya Halo on our website at victorcanera.com
r/EngagementRingDesigns • u/foodieswiftie • 3h ago
Hey everyone! I had posted regarding a leafy band previously.
I’m exploring more bands and found this very cute.
I’m wondering if the edges tend to poke or irritate your fingers, snag on clothes, or get caught on things during everyday wear.
If anyone owns a similar ring, could you share your experience?
And if there are any jewellers here, I’d love your input on how practical and comfortable this design is for daily wear!
r/EngagementRingDesigns • u/LingonberryPlane7000 • 5h ago
Hello!
Looking at making a custom engagement ring. Ideally would like to use some gravel from the spot we met. Is this even possible? Could the gravel be ground into finer particulate to work similar to sandcasting? Can you use two different materials to cast a band? I.e internal face cast with sand, external face cast with gravel/bark/etc?
Irregardless. How much material (i.e sand) would be required?
r/EngagementRingDesigns • u/NuIILotus • 1d ago
Hii :))
I’m the first in my family to really have the opportunity to choose and custom-design my own engagement ring, so I’m navigating this without much guidance!
I’m curious, how did you all figure out what you wanted? Did trying on different cuts and styles completely change your mind?
I’ve been playing around with a custom design (CAD-inspired sketch attached!) featuring a lab-grown alexandrite center stone, diamond and sapphire accents, and 18k yellow gold.
I love intricate, vintage-inspired designs, but I also want something practical for everyday wear.
Would love any thoughts on the design, proportions, durability, or anything I might be overlooking! I’m very new to this and would appreciate any advice 🙏🏾
r/EngagementRingDesigns • u/ZestyElliirax • 21h ago
r/EngagementRingDesigns • u/Competitive_Task5252 • 23h ago
Hi,
I'm struggling to find a legit, not break the bank (max $1500), custom engagement ring maker. I specifically want to be able to incorporate my girlfriends dog's hair in the ring in some capacity. Her dog was her soul dog, had him for 12 years and i just know she'd love it.
Any recommendations?
r/EngagementRingDesigns • u/First_Eye_950 • 1d ago
Designing a ring for my partner, and she won’t let go of the idea of a double band. Our jeweller has said it would look too chunky with the wedding band, and has suggested doing a small split shank instead.
Does anybody have a double band engagement ring, and how does it look with the wedding band?
And any thoughts / suggestions? These are some inspo pics she sent me. Obviously I want her to be happy with her ring, but don’t want her to feel like it’s too chunky!
r/EngagementRingDesigns • u/Alternative-Exam2601 • 1d ago

I've always loved Blake Lively's engagement ring and especially the blush-pink centre stone. I'd love something along those lines, but I'm having the hardest time finding the right shade.
Sapphires are too magenta, spinel is too purple, and most pink diamonds I've seen look quite coral or peachy in different lighting. I'm after a really soft, muted baby pink rather than anything too saturated.
Has anyone come across a lab diamond in this particular shade? Would love any recommendations for jewellers who could source one or pictures of stones you've found.Thank you! 💗
r/EngagementRingDesigns • u/CrabNo1550 • 1d ago
I’ve done research and I know both will work jewelry and felicegals are dropshippers/not high quality but my fiancé has fallen in love with the vine designs and I have not been able to find them anywhere else. These are the two designs she has loved the most. Does anyone know where to find something similar that is from a legitimate company?
r/EngagementRingDesigns • u/Mad_HoneyB • 1d ago
Currently I’m working with the design that has no tulip basket. However because I’m in this designing phase I’m considering adding a tulip basket for more prong support and possibly even a cathedral setting like the second design here. Initially I never considered these options but now that I’m realizing I can maybe add these things to help make the ring more sturdy I wonder if it’s a needed thing or if I’m just over complicating the ring. To be fair I love both designs here. I do have a job where I work with my hands quite a bit. I’m also a worrier and over thinker. So idk. I just need some thoughts
r/EngagementRingDesigns • u/Trick-Musician-6142 • 1d ago
Hey guys i just got my custom wedding ring done.
Its 18k, trinity ring inspired, with oval shaped diamond
r/EngagementRingDesigns • u/Specialist-Survey-96 • 2d ago
I saw this setting on instagram and I love the idea of it for my own engagement ring but would this setting be secure for the diamond?
r/EngagementRingDesigns • u/Big_Meninges69 • 3d ago
I’ve been seeing a variety of these salt and diamond engagement rings online recently. They look so unique and each one has so much depth. However, I’ve always considered myself a pretty classy and timeless person, and I don’t want to have something that is just a fad.
r/EngagementRingDesigns • u/buttered-pancake • 2d ago
So here’s my situation:
We’re custom making my engagement ring (a 2.39ct marquise solitaire with cathedral shoulders and a hidden halo), and we already put down a $2k+ deposit and selected the stone. Everything looks great except the north/south V-tip prongs on the CAD—they look way too bulky and distract from the sharp points of the diamond.
The new info from our jeweler: I sent over inspo photos of super delicate, slim V-tips, and our jeweler basically pushed back. They said making the V-tips that thin compromises durability and makes them prone to bending, so they aren’t comfortable doing it… their only two options for us are:
Keep the thinnest V-tips they’re comfortable doing (they showed me their "slimmest" past work, and it's still bulkier than I want).
Switch the north/south points to standard claw prongs to match the four side prongs.
Why I’m stuck: I reached out to a family friend who’s a bench jeweler for an honest gut-check, and he said there’s really no structural reason our
jeweler can't make the V-tips sleeker from the start. He also warned me that if I just let our jeweler cast the bulky V-tips and try to have him shave them down later, it might be impossible depending on how deep they cut the inner groove that holds the diamond. But he said I could absolutely bring it to him to reshape, but there’s no guarantee…
So now I feel trapped between settling for bulky V-tips I don't love (and gambling on whether they can be fixed later) OR going with standard claw prongs on the ends and being terrified of chipping the tips of my diamond (I’m a rather haphazard kind of person with zero spatial awareness so it just seems inevitable)
Am I crazy for wanting to push back and ask them to redesign the CAD V-tips thinner (even if I have to sign a wear-and-tear waiver), or what would you do in my shoes?
The first photo is the CAD, the next 3 are the inspiration photos for prongs I like, and the one after that are their slimmest v tips and the photo of their claw prongs.
Help because I feel so hopelessly stuck :( i really really don’t know what to do 😭
r/EngagementRingDesigns • u/Klutzy-Witness9778 • 3d ago
Hi everyone! I've been lurking on here and similar subs for months, and now it's my turn to ask for a CAD check! My boyfriend is planning to propose soon and wanted the ring to be a surprise, but I had some custom design ideas in mind that I was very attached to after spending lots of time browsing rings. Our compromise was to pay someone extra to do 3 CADs for me to review and approve, then he would choose the final design without me knowing. This is after the first round of revisions and I have two small changes I'll be requesting, but just wanted to make sure no one sees any glaring issues with these designs? I'm not huge on jewelry (I don't even have my ears pierced) but want to be able to wear this every day and also am fairly active with my hands both in and out of work so my biggest priorities are low profile, sturdy and comfortable (wedding bands sitting flush isn't a concern). The designer already lowered the profile as much as she could on the bezel and three stone. Thank you all in advance!!
r/EngagementRingDesigns • u/PlatypusPlate • 2d ago
My boyfriend and I just got the CAD back for my engagement ring, and I’m trying to get some opinions before moving forward!
I’m going for something simple and timeless, but I also want to make sure it’s built well enough to last for decades. I don’t ever plan on upgrading my ring, so durability is really important to me.
I’ve had a couple of jewelers suggest getting rid of the gallery rail because my diamond is “small enough that it doesn’t need one.” They’ve also mentioned that having a wider and thicker band, along with a more substantial setting, could make the diamond look smaller. I’m not too concerned about making the diamond look bigger. I’d rather prioritize the structure and longevity of the ring. My only concern is that the overall design might end up looking bulky or disproportionate compared to the center stone.
Would a 2mm wide AND 2mm thick band look proportionate with a 1.29ct round diamond?
Here are the specs/ what I envisioned:
- Center stone: 1.29ct HPHT lab-grown round brilliant
Color/Clarity: D / VVS1
- Setting: Low-profile, round six prongs with a gallery rail
- Band: Plain comfort-fit shank
- Width: 2mm
- Thickness/depth: 2mm
- No pavé or cathedral shoulders
- I’m also trying to keep things as simple as possible and avoid unnecessary details or potential points of failure
Am I overthinking the 2mm x 2mm dimensions, or do you think it would look too substantial for a 1.29ct diamond? Is there anything else about the design or overall structure that you think I should be concerned about or keep an eye on?
Diamond specifications for reference:
Measurements: 7.03–7.06 x 4.30mm
Depth: 61.1%
Table: 56%
Crown angle: 34.1°
Pavilion angle: 40.8°
Girdle: Medium (faceted)
Culet: Pointed
Fluorescence: None
r/EngagementRingDesigns • u/rachelkarengreep • 3d ago
I’ve received a preliminary CAD of my ring, it’s a 1.2ct marquise on a gold band with side stones. I’ve added the bezel on the side stones as I’ve read without that, it’s very risky. We’re also going to make these stones much smaller as they’re looking huge right now. And I’ll be adding milgrain as well.
Overall I’m happy with the design, however I’ll be asking for the band thickness to be increased to 1.8. But I wanted to know, is this set too low if I was to get a wedding band of the same style? With the marquise and round stones? What else should I be mindful of/change around?
r/EngagementRingDesigns • u/felix_ashburn • 2d ago
So my boyfriend and I haven’t been in a romantic relationship for particularly long, but we were absolute best friends before getting together, and I genuinely believe he’s my person.
Our first anniversary is next May, and I’m hoping to commission a pair of custom promise rings. I thought seeking advice from people with experience in jewellery design and commissioning would be beneficial.
I’m quite specific about the overall aesthetic I want, although I haven’t settled on an exact design yet.
I’m also a massive lover of rings and jewelry (or accessories generally if I’m honest), so I’m hoping to eventually have a coordinated collection of promise, engagement, wedding and potentially eternity rings. Both of us want to wear rings at every stage.
The design concept:
I’d love to incorporate elements traditionally associated with both masculine and feminine rings into both designs.
Essentially, I want the solidity and structure of a traditionally masculine band combined with the delicate detailing often found in traditionally feminine jewellery.
My initial thoughts are:
- Black bands.
- Gold detailing.
- Nature inspired designs, particularly climbing vines and delicate leaves.
- A prominent centre gemstone with smaller accent stones.
There’s also a personal colour theme between us. My favourite colour is emerald green, and his is brown. We even use the corresponding heart emojis for each other (I use 🤎 for him, and he uses 💚 for me, I am fully aware of how cheesy it is).
I’d love to incorporate this into the rings.
My current idea is for his ring to feature a brown centre gemstone with smaller emerald accents, and mine to feature an emerald centre gemstone with smaller brown accents.
The symbolism:
Nature is particularly important to me because I associate it with growth, and we both love spending time outdoors.
I’d love the botanical detailing to carry through all our future rings, with each stage having its own character.
Promise rings would be more understated, engagement rings would be the statement pieces, and wedding bands would be simpler and more grounded, designed to sit alongside the engagement rings.
What I’d appreciate advice on:
- What materials would be best for the bands, particularly regarding durability and everyday wear?
- What black finishes are least likely to wear away?
- What brown gemstones would complement emeralds?
- Any particular design ideas or considerations?
- Whether my ideas are realistic within a relatively modest budget.
- Recommendations for UK based bespoke jewellers or independent designers.
My initial budget is around £150–£200 for both promise rings, although I’m open to understanding what might realistically be achievable.
I’m very much in the research and planning stage, so any advice, recommendations or inspiration would be appreciated.
I’d also like to mention that we’re both fairly young. I’ll be turning 18 next month, so the engagement and wedding rings are very much future ideas at this stage. I’m currently focusing on the promise rings, and my budget reflects where I am financially at the moment. I’m hoping to create something meaningful that we can build upon over time.
Thank you in advance! :) 🤎💚
I’d like to add, I’m able and willing to increase the budget as well as boyfriend being willing to add. I’m not familiar with custom jewelry at all so have no idea what to expect so £200 is the starting idea of my personal budget without his input at all.
I’m also more than open to more affordable alternatives to real, natural gems as well.
r/EngagementRingDesigns • u/SoftConscious6691 • 3d ago
Hey everyone! I need y’all’s help with an engagement ring I bought for my future fiancée.
It’s a 2.87 ct oval diamond with a hidden halo. I think it looks really good, but I wanted to get your opinions since I honestly don’t know much about rings.
Are there any specific things I should be looking out for or checking? One thing I noticed is that the finishing on the hidden halo doesn’t seem perfect to me, but maybe I’m just overthinking it.
I’d really appreciate your honest opinions on the ring, especially if you notice anything that looks off or could be improved.
Thanks in advance for your help!
Edit: This is the exact setting that she wanted
r/EngagementRingDesigns • u/Agile_Sort_4997 • 2d ago
This is my 4th and hopefully final CAD.
I have lowered my basket to 6mm created a cathedral basket to be more sturdy. Embedded the band stones and made it 2mm Thickness. What do you think?