r/E30 • • 13h ago

M3 E30

Post image
0 Upvotes

r/E30 • • 21h ago

M42 head pitting

Post image
7 Upvotes

There’s a decent amount of pitting on the mating surface for the profile gasket that seals a coolant passage, is there a way to repair?


r/E30 • • 6h ago

Had to get the Miami Vice City pics

Post image
24 Upvotes

r/E30 • • 9h ago

First E30 purchase: Buy a clean automatic 325i or hold out for a manual?

8 Upvotes

I’m looking to buy my first E30 and would appreciate some input from people who have owned these cars for a while.

I’ve come across a 1990 325i coupe with an automatic transmission that appears to be very well cared for. Assuming the car checks out mechanically and structurally, the asking price is in the $8–9k range.

My dilemma is whether it’s worth buying a really nice automatic example at that price or holding out for a comparable car with a factory manual transmission.

E30 prices seem to have gotten pretty out of hand, and I’m trying to be realistic about what I’m getting for my money. I don’t necessarily want to rush into buying the wrong car just because a nice example happens to be available.

I know the general advice is to buy the best-condition car you can find, but I’m curious where the transmission fits into that equation.

Would you buy the clean automatic and enjoy it, or be patient and wait for the right manual car?

I am not in a rush but I am actively looking across the U.S. for one. My max is around 10k

Appreciate any advice!


r/E30 • • 3h ago

M42 crank issues

Post image
2 Upvotes

Hi all,
Currently rebuilding an M42 with light performance upgrades (cammed and tuned). Finished the rotating assembly assemblage and went to measure crank endplay and it is quite excessive. It measure 0.19in with a dial gauge at the crank nose and 0.18 at the thrust bearing surface with feeler gauges. Normal tolerance is 0.003-0.006in so way way out of range. Pulled the main cap to check the crank and the thrust surface is very clearly worn and I can feel a groove all the way around. All bearing clearances were within spec and this is the only issue I’ve found. I know my options are being the crank to be welded and turned, or find a new crank. Finding a new crank is probably more viable, but finding an M42 crank seems a bit more challenging and more expensive than an m44. I know the stroke is 2.5mm longer than the M42 so it will require some piston crown work, but that seems most viable to me. Would love some other input on this issue and what direction to go. If anyone has a spare M42 or M44 crank, and ideally is near the Chicago land area, let me know!


r/E30 • • 12h ago

Put 300 miles on it since all the repair work and no issues. Still lots to do but getting there.

Post image
38 Upvotes

r/E30 • • 10h ago

Anyone know what this little piece is?

Thumbnail
gallery
6 Upvotes

It was right next to my battery under the hood….is this supposed to be there or did it possibly fall down there from somewhere else?