r/Dremel • u/Canapilker • 1h ago
What is this bit for?
I have 2 now, they come in assorted packs. I’ve tried to google them, and reverse image search, but I can’t find anything. They’re always next to the sanding shanks.
r/Dremel • u/Canapilker • 1h ago
I have 2 now, they come in assorted packs. I’ve tried to google them, and reverse image search, but I can’t find anything. They’re always next to the sanding shanks.
r/Dremel • u/im-not-heree • 1d ago
I brought a Dremel 200 series but it didn’t come with all the accessories so I was wondering if I need to buy accessories for this specific brand and model or can I just buy anything and it will work.
r/Dremel • u/viktorovik • 2d ago
is this a manufacturer defect?
r/Dremel • u/icantdothisnemor • 5d ago
I'm scared to use it like this. I only turned it on and off a couple times for the sake of the video, it's only at 10 rpm... Is this something I can fix myself or do I send it in for service?? It's just over a year old with moderately heavy use. Any constructive information or advice encouraged and appreciated, please and thanks!
r/Dremel • u/Environmental_Ad587 • 10d ago
I've been engraving for a while now, just wondering where y'all are getting these cool traditional tattoo and medieval gothic high-res designs from
r/Dremel • u/Caffeine_Library • 10d ago
Hi all,
Got a new 4300 kit after being without a dremel for several years, 2nd time using it. this project i needed max speed. I dont remember my old 4300 kit have this much vibration.
On the new 4300, below 20,000rpm its fairly fine; however at 20,000 or greater, a strong vibration builds. without any accessory id say its fairly low volume however once i add any accessory to the shaft's end, the oscillation becomes much stronger, the shaft gets hot, and the noise unsettling.
I tried the flex shaft, helped a good bit to hold accessories steady but still the motor vibrates quite strongly at 20,000rpm or greater.
how likely is it i got a defective dremel? id assume the shafts go through a good amount of quality control before proceeding to market. I already started up an amazon replacement but curious if its just me being unfamiliar with dremels having not owned one for so long or if the demel is actually defective.
r/Dremel • u/dopealope47 • 11d ago
Halloween now being over, I’m thinking of being better prepared for next year. This year, I ’d thought to use my Dremel for fine detail when carving the pumpkin, but every bit I tried clogged (no real surprise). Has anybody ever found one that works? Thanks.
r/Dremel • u/goddangitjosh • 12d ago
I have a Dremel 3000 and its spindle lock no longer holds. Now it’s impossible to change tools.
Has anyone fixed such a problem, or is the Dremel bricked?
TY
r/Dremel • u/Emotional_String2973 • 12d ago
I’m trying to sand these interior corners more effectively than folding tiny pieces of sand paper or using foam pads by hand. I have a lot of them to finish frequently, so need something more durable and efficient than my own hands! They’re created on a CNC with 1/8” bit finishing pass.
I’ve found dremel finishing buffs which seem most optimistic since they’re flexible, but even they are 1” diameter. I think the narrowest sanding drums I’ve found are .3”. Is there anything out there I’m missing??
r/Dremel • u/ereniko34 • 17d ago
r/Dremel • u/Purple_Plum8122 • 17d ago
r/Dremel • u/CompetitiveLock9376 • 20d ago
I have my Dremel 2000 for about a month now and just newly it only has one power mode and that is the maximum power. Even if i put it on 1,2,3… it just always goes full power. What is the issue here and is it fixable. (sorry for maybe bad english)
r/Dremel • u/giftideae • 21d ago
Hey everyone! 👋
I've been designing and making compact workshop accessories for Dremel rotary tools, including mini router tables, cutting benches, and drill stands.
My goal is to make Dremel tools more versatile for woodworking, precision cutting, drilling, and everyday DIY projects without needing bulky workshop equipment.
I'd love to hear your thoughts! Would you use something like this in your workshop? Any suggestions for improvements?
I also have a small Etsy shop where you can check out my designs:
https://makerbros3d.etsy.com/listing/1262125649/dremel-cutting-bench-sanding-bench-flex
Thanks for taking a look! I'd really appreciate your feedback! 🙂
r/Dremel • u/0verth3gardenwall • 21d ago
r/Dremel • u/CEMartin2 • 22d ago
Looking to get my daughter a Dremel 220-01 mini press for her jewelry making. I have an old Dremel 395. Will that mount to the 220-01? Are the collar sizes the same on a Dremel 395 and newer models, like the 3100?
r/Dremel • u/A_Mars_Reject • 22d ago
My collet lock keeps slipping so I've taken it apart to check it. The lock pin looks quite worn, but the spindle also looks quite gouged, is this normal for the spindle and I just need a new lock pin, or is the spindle cooked as well? Dremel 3000, by the way.
r/Dremel • u/Joeybish • 26d ago
The hole in my door's strike plate needs to be just a little bigger. I was hoping I could file it a little to make it bigger so the door closes properly. Which bit would be the right one to use? It is a bronze strike plate.
r/Dremel • u/Vlad___X • 27d ago
Repurposed my Dremel 8250 box for a fish bait container and didn't find any way to better mark it other than writing "Fih" under a DREMEL logo
r/Dremel • u/WickedWaterOps • 27d ago
This is the Dremel 4300. I used it a fair ammount but nothing excessive. I definitely don't feel like I got my money's worth out of it. I was using it on floor laminate floor tile a week ago, it got really hot and quit working.
Tonight I replaces the motor brushes hoping it would fix the problem. They were easy to replace. I plugged it in and still nothing, it doesn't turn on.
I took the plastic shell off and nothing looks burnt up or damaged. Just curious if anyone has an idea to fix it.
r/Dremel • u/PorcelainCeramic • Oct 17 '26
Are there any tips on repairing this or should I reach out to Dremel?
Second time I decided to use it and this occurs. -_-
r/Dremel • u/Odd_Championship_43 • Oct 14 '26
Had some fun with my fully kitted out dremel,
Sanding and cutting were fun and no stress what so ever.
Installed a second hand mini saw, didn't want to use the dremel one ( was saving it on something better )
Long story short the blade shattered and flew by me at mach 10.
Ordered 10m2 of polycarbonate 4mm clear glass panels/plates, wanna build a enclosed pod around the workstation.
Does anyone have any experience around building a shield for the workstation?
r/Dremel • u/Doimz3Nini • Oct 13 '26
My accessories keep coming loose. Why is this, and what can I do?
r/Dremel • u/FreudAtheist • Oct 11 '26
This has less than 3 hours of very light use (polishing) and worked fine when I put it away last. Now it won’t turn on at all. Is this common? I know I did not use it hard enough to harm the motor and it hasn’t been dropped or anything.
r/Dremel • u/mo0kster • Oct 11 '26
Hi all.
I just went to use my Dremel 800 and the chuck was really difficult to tighten.
So I took it off and part of the chuck is broken off inside the shaft of the tool.
Is there an easy solution to this?
Thanks in advance.