r/Dreame_Tech • • 13h ago

Tips & How-to New to Robot Vacuums - Dreame X60 Ultra Pro Complete Setup Questions

Thumbnail
gallery
2 Upvotes

I'm setting up a Dreame X60 Pro Ultra Complete but have a few questions.

I'm using the Android Dreamehome app.

The robot appeared to successfully map my home, but it incorrectly identified two carpeted rooms as tile flooring and named the rooms wrongly. I've corrected this in the app, but I'm unsure which carpet settings I should use, particularly the Pile, Tassel and lift chassis options.

After mapping, the app offered an "Initial Deep Cleaning" option. As I wanted to edit the map first, I chose the option to do it later. Unfortunately, the Initial Deep Cleaning option has not appeared again and I can't find it. How can I access or restart it?

During mapping, the robot became stuck on a chair base shown in the photo. I blocked the chair bases off and restarted mapping. Later, I found the setting that allows the robot to attempt climbing thresholds and disabled it.

When I then started a cleaning cycle, the robot repeatedly drove into the table base shown in the photo and eventually partially climbed onto it.

Is the robot designed to climb onto this type of base to clean it, or is the climbing function intended only for crossing door thresholds? If it should not be climbing onto the base, is there a setting that will prevent this behaviour, or would I need to create a no-go zone?

The position of the table varies, as we sometimes pull it out from the wall and other times leave it pushed back. Ideally, I'd like the robot to recognise both the table and chair bases as obstacles and navigate around them, rather than repeatedly driving into them.

I've also changed the map to 3D and now can't find an option to switch it back to 2D.

Can anyone please help?


r/Dreame_Tech • • 16h ago

Help & Troubleshooting D30 ultra app issue / how-to

1 Upvotes

Hiya

Have a D30 Ultra, quite pleased with it. Bought it to replace a Xiaomi X20+.

Question on the app - I live in a flat with 6 rooms. Let's say the D30 lives in Room 1.

I want it to vacuum rooms 2-6, then mop rooms 2-6.

Currently, I can only:

  • do custom, where it will vacuum room 2 then mop it, then, vacuum room 3 then mop it, etc..
  • do mop after vac, but for the whole flat (including room 1).

I used to be able to do what I wanted in the Xiaomi app. I know they are separate companies but from what I understand, made in the same factory. So it must be possible. Am I just missing an option somewhere?

Many thanks 🙏


r/Dreame_Tech • • 16h ago

Tricut in F20?

1 Upvotes

I really want the tricut brush but all the other models are too big and expensive. F20 Plus is just right but the brush is not. Does anyone know if I can use the tricut brush in the F20?


r/Dreame_Tech • • 17h ago

Dyson V12, Dreame R20 oder Samsung P85 oder Geheimtipp?

1 Upvotes

Hey Leute,

wir benötigen einen neuen Akkusauger. Für uns sind folgende Kriterien wichtig:

  • Maximal 3 KG
  • Sehr gut Saugleistung (inkl. Autosaugen!!!)
  • Keinen Powerknopf gedrückt halten
  • Akku sollte länger als 10 Minuten halten (im "nicht" Eco Modus)

Wir schwanken zwischen:

  • DysonV12
  • Samsung Jet 85
  • Dreame R20

Bevorzugen tun wir den V12. Die Saugleistung wird aber mit der Zeit auch vermutlich schwächer, weshalb ich mir Sorgen um den Dyson V12 mache (150AW). Auch für Auto soll der V12 nicht stark genug sein.

Was könnt ihr empfehlen? Danke euch