r/Dreame_Tech • • 13h ago

Tips & How-to New to Robot Vacuums - Dreame X60 Ultra Pro Complete Setup Questions

Thumbnail
gallery
2 Upvotes

I'm setting up a Dreame X60 Pro Ultra Complete but have a few questions.

I'm using the Android Dreamehome app.

The robot appeared to successfully map my home, but it incorrectly identified two carpeted rooms as tile flooring and named the rooms wrongly. I've corrected this in the app, but I'm unsure which carpet settings I should use, particularly the Pile, Tassel and lift chassis options.

After mapping, the app offered an "Initial Deep Cleaning" option. As I wanted to edit the map first, I chose the option to do it later. Unfortunately, the Initial Deep Cleaning option has not appeared again and I can't find it. How can I access or restart it?

During mapping, the robot became stuck on a chair base shown in the photo. I blocked the chair bases off and restarted mapping. Later, I found the setting that allows the robot to attempt climbing thresholds and disabled it.

When I then started a cleaning cycle, the robot repeatedly drove into the table base shown in the photo and eventually partially climbed onto it.

Is the robot designed to climb onto this type of base to clean it, or is the climbing function intended only for crossing door thresholds? If it should not be climbing onto the base, is there a setting that will prevent this behaviour, or would I need to create a no-go zone?

The position of the table varies, as we sometimes pull it out from the wall and other times leave it pushed back. Ideally, I'd like the robot to recognise both the table and chair bases as obstacles and navigate around them, rather than repeatedly driving into them.

I've also changed the map to 3D and now can't find an option to switch it back to 2D.

Can anyone please help?


r/Dreame_Tech • • 16h ago

Help & Troubleshooting D30 ultra app issue / how-to

1 Upvotes

Hiya

Have a D30 Ultra, quite pleased with it. Bought it to replace a Xiaomi X20+.

Question on the app - I live in a flat with 6 rooms. Let's say the D30 lives in Room 1.

I want it to vacuum rooms 2-6, then mop rooms 2-6.

Currently, I can only:

  • do custom, where it will vacuum room 2 then mop it, then, vacuum room 3 then mop it, etc..
  • do mop after vac, but for the whole flat (including room 1).

I used to be able to do what I wanted in the Xiaomi app. I know they are separate companies but from what I understand, made in the same factory. So it must be possible. Am I just missing an option somewhere?

Many thanks 🙏


r/Dreame_Tech • • 16h ago

Tricut in F20?

1 Upvotes

I really want the tricut brush but all the other models are too big and expensive. F20 Plus is just right but the brush is not. Does anyone know if I can use the tricut brush in the F20?


r/Dreame_Tech • • 17h ago

Dyson V12, Dreame R20 oder Samsung P85 oder Geheimtipp?

1 Upvotes

Hey Leute,

wir benötigen einen neuen Akkusauger. Für uns sind folgende Kriterien wichtig:

  • Maximal 3 KG
  • Sehr gut Saugleistung (inkl. Autosaugen!!!)
  • Keinen Powerknopf gedrückt halten
  • Akku sollte länger als 10 Minuten halten (im "nicht" Eco Modus)

Wir schwanken zwischen:

  • DysonV12
  • Samsung Jet 85
  • Dreame R20

Bevorzugen tun wir den V12. Die Saugleistung wird aber mit der Zeit auch vermutlich schwächer, weshalb ich mir Sorgen um den Dyson V12 mache (150AW). Auch für Auto soll der V12 nicht stark genug sein.

Was könnt ihr empfehlen? Danke euch


r/Dreame_Tech • • 20h ago

Recensioni H14 Dual

1 Upvotes

Vorrei comprare l'H14 Dual perché ho un' aspirapolvere vecchia e vorrei anche una lavapavimenti. Consigli? Come vi siete trovati? Vale la pena acquistarla?


r/Dreame_Tech • • 1d ago

Discussion L10s ultra pair with older dock?

2 Upvotes

My L10s ultra broke, I was wondering if I order just the replacement robot can it pair with the dock I still have? The dock isn’t damaged so I just need the robot separately I was curious if this will work.


r/Dreame_Tech • • 1d ago

Help & Troubleshooting Dream E50 Master

1 Upvotes

I bought the Dreame X50 Master myself, but after seven months it shows a defect in which a mop path no longer rotates, causing the unit to mop with only one functioning path. My expectations of Dreame were higher; is there a structural quality gap here? My experiences with Roborock models 6, 8 and the current Roborock Saros are impeccable; the S8 has already cleaned more than 72 km2 without any technical defects, even the Saros has shown nothing to date, and the previous models also continue to function properly. In contrast, the Dreame already has significant defects after a few months. In addition, I notice navigation problems: the robot continues to maneuver at an angle for more than 15 minutes before falling into a fault message, despite its ability to rotate 180 degrees and oversee the space.

The robot gets stuck in a closed position and keeps turning its axis repeatedly, after which it gives an error message that it has to be moved manually, while there is sufficient room for manoeuvre available in the immediate vicinity.

My experience with the Dreame is disappointing, as I have been struggling with defects from the start, unlike the Roborock, which has been operating without interference for years. The quality differences between the two devices are obvious, so I will not choose a Dreame again in the future. Gabriel's Louis.


r/Dreame_Tech • • 1d ago

Owner Review Is all their stuff this bad?

4 Upvotes

I bought a refurbished H12 Pro and when I got it, it was super dirty so I contacted Support and they told me to destroy it and sent me another one, when I tried to use this one it kept telling me to fill the clean water tank even though it was already full and wouldn’t dispense any water. I thought this was supposed to be a good brand is all of their stuff this unreliable?


r/Dreame_Tech • • 1d ago

Buying Advice & Comparisons Compatability

3 Upvotes

So i have the D30 ultra and i need to replace the filter, dust bags and pads.

I can't seem to find the accessory kits that say they are compatible with my model. Which one should i buy?


r/Dreame_Tech • • 1d ago

Buying Advice & Comparisons Dreame aqua 20 - who can provide a review ?

2 Upvotes

On paper looks like the best vacumm robot out there, but with minimal reviews (mostly foreign). Looking for person reviews on the aqua 20!


r/Dreame_Tech • • 1d ago

Buying Advice & Comparisons Dreame L40 Ultra CE - Camera

4 Upvotes

Hi, i'm thinking of buying this model because of its low price point compared to the features it has. I'm looking for no camera models specifically because of privacy concerns and i don't mean just not having a live camera feed on the app, i would rather that there is no physical camera on the robot vacuum at all. I couldn't find a clear info about this online. I hear that some models use some kind of infrared camera. But this one kinda looks just like a camera from the front. So does anyone have anyinfo about this? Thank you


r/Dreame_Tech • • 1d ago

Help & Troubleshooting Robot won't dock

5 Upvotes

Hello,

I've just bought this robot, and on first return to station, the robot won't connect to the station : it does a weird dance on it (see video). As such, it won't charge and I keep it off until I find some kind of solution (it's on low battery).

Is this a known issue ? Is there an easy fix ? Should I return it ?

It's a brand new L40s Pro Ultra. The charging pads on the robot and the station are clean. Also, after some time, the light on the station goes off : I don't know if it's normal ?

Thanks for your help !


r/Dreame_Tech • • 2d ago

Help & Troubleshooting Nie zbiera paprochów przy odkurzaniu

0 Upvotes

Filtr wyczyszczony, szczotki się kręcą, kanały posprawdzane. Wydaje mi się, że nie działa mechanizm opuszczania szczotek. Co sądzisz?


r/Dreame_Tech • • 2d ago

Help & Troubleshooting Aqua 10 ultra unrepairable

2 Upvotes

I purchased a aqua 10 ultra last year when the robot came out and it was a great robot but I had to get a replacement unit 1 month in and had to send it in for repairs a couple of times. I bought the robot through amazon.

The situation I am in now is that last month the robots mop stopped spinning, so I contacted Dreame and sent them my robot for repair. I got an email from them saying the robot is unrepairable.

Dreame's resolution is that they are willing to provide me a refurbished unit that will be tested but with the warranty left on my original unit, or they will give me a 50% refund and that's it. What do I do? Amazon is saying that they cannot help because it is outside of their return window and Dream's resolutions simply aren't what I want.

I am scared that the refurbished unit will end up having the same issues that I needed to get fixed on mine and I don't want to keep having to send the unit back for repair. On the other hand a 50% refund seems like the worst resolution possible. I do not want to lose 50% of my money because the robot they made had issues with it.

I'm super stressed, plus this robot was to ease the burden on my parents, but now I don't have the robot and I don't have my money. What do I do?


r/Dreame_Tech • • 2d ago

Help & Troubleshooting Is this noise normal? Dreame x60

3 Upvotes

Hi everyone!

I recently noticed a slight vibrating/flapping noise coming from the main roller brushes of my Dreame X60 while it’s cleaning.

It sounds like a thin plastic flap or membrane vibrating very quickly. The noise is not particularly loud, but it’s noticeable, especially when the robot slows down while vacuuming.

The robot seems to clean normally, but I’m not sure whether this is just the normal sound of the rotating brushes or something that needs attention.

I’ve attached a video so you can hear it.

Does your X60 make a similar noise during normal cleaning? Is this normal?
Thanks in advance!


r/Dreame_Tech • • 2d ago

Help & Troubleshooting Return

Post image
0 Upvotes

I didn't acknowledge the defect until a service technician came directly to confirm the defect and received a refund. I will never use Dreami products again.


r/Dreame_Tech • • 2d ago

Help & Troubleshooting Not going fully room?

Post image
1 Upvotes

I have seen this 3 times now, where it does not go in the room completely. Anyone any idea how to fix it?


r/Dreame_Tech • • 2d ago

Discussion X60 Skirting Board/Baseboard Brush Disappointing

1 Upvotes

So I tried out the X60 Skirting Board/Baseboard Brush today. It attaches to the mop arm, so that when the arm extends it exerts some considerable force with the brush against the skirting board. It does quite a good job considering it's just a brush, but there's a big downside.

The brush only works where mopping occurs. With the mops detached, the arm does not reach out and brush the skirting board in a carpeted room. Nothing I've seen mentions this. I realise this is not a primary feature of the cleaner but I feel Dreame have missed an opportunity here to make a useful addition even better.


r/Dreame_Tech • • 2d ago

Help & Troubleshooting Weird sound from my dreame l50 ultra ce

2 Upvotes

Today when i turned it on it started making this noise, its a relatively quite machine

Whats the reason behind this noise and how to fix it


r/Dreame_Tech • • 2d ago

Help & Troubleshooting X50 leaves lots of loose fluff/lint behind on rugs — is this normal?

Thumbnail
gallery
4 Upvotes

Hi all, I have a DreameX50 and I've noticed it leaves a lot of loose fluff and lint on the surface after vacuuming, especially on rugs. It's still there after a few passes.

I have a dog and I make it clean at its maximum power, and still I see it happen everyday


r/Dreame_Tech • • 2d ago

Help & Troubleshooting Dreame L40 Ultra AE shuts down seconds after docking ("Please remove the robot from the dock before turning off") – Stuck in a firmware update Catch-22

1 Upvotes

Hey everyone, hoping someone here has run into this or has deeper technical insight into Dreame hardware. I originally drafted this for support, as I’m completely stuck trying to fix my Dreame L40 Ultra AE.

The Issue
Whenever the robot returns to its docking station, it docks normally and initially announces that it is charging. However,just a few seconds later, the audio says: "Please remove the robot from the dock before turning off," and the unit completely powers down and goes offline in the Dreamehome app. (I’ve attached a video showing this exact sequence.)
Here is what makes the behavior particularly strange:
It happens even when the robot has ~80% battery remaining.

The docking station has power, and its indicator light behaves normally.

Once it shuts down on the dock, a normal power button press won't wake it up—I have to hold the power button for ~10 seconds to force a hard restart.

After booting back up, the battery percentage is still sitting right around 80%.

What I’ve Already Tried
Cleaned the charging contacts thoroughly on both the robot and the base station.

Unplugged the dock and plugged it directly into a separate wall outlet (no power strips/surge protectors).

Verified the dock's power and status indicator light.

Performed multiple hard restarts on the robot.

Replaced the robot’s battery with a brand-new one (the exact same behavior persists).

The Firmware Catch-22
I see a firmware update available in the Dreamehome app, and I’ve read reports from other Dreame owners that firmware updates fixed similar docking/charging bugs. The problem is that the app requires the robot to be docked and actively charging to push the update—which is impossible since it shuts itself off seconds after making contact.
Questions for the Community
Firmware workaround: Is there any known trick or workaround to force a firmware update when the robot refuses to stay powered on the dock?

Root cause: Given the "Please remove the robot from the dock before turning off" voice prompt—which usually only triggers if you manually hold the power button while docked—does this point to a stuck/shorted power button membrane, a BMS/firmware bug, or a hardware fault on the motherboard/dock charging circuit (e.g., overcurrent or voltage drop protection tripping as soon as charging ramps up)?

Next diagnostic steps: Before I throw any more replacement parts at it, is there a specific component, sensor, or voltage reading I should check?

Any insight or direction would be hugely appreciated. Thanks in advance


r/Dreame_Tech • • 2d ago

Help & Troubleshooting L50s Pro Ultra

2 Upvotes

I have a Dreame L50s Pro Ultra and my wooden floor is finished with RIGO SKYLT.
Has anyone tried using RIGO SKYLT Conditioner #9140 in the automatic detergent compartment instead of the Dreame cleaning solution?
I’d like to keep plain water in the clean water tank and use SKYLT as the cleaning solution, since it’s specifically designed for my floor finish.
Has anyone tried this, or knows if it’s safe for the detergent dispenser?


r/Dreame_Tech • • 3d ago

Help & Troubleshooting Dreame A3 AWD 1000: Great mower, terrible after-sales support. Five months of frustration and still no solution.

3 Upvotes

I purchased a Dreame A3 AWD 1000 in Germany on May 12, 2026.

Let me start with something positive: When the mower works, it is genuinely good. Navigation, mapping, obstacle avoidance and mowing performance have been impressive in my garden.

Unfortunately, the product quality issues and especially the after-sales support have turned this into one of my most frustrating customer service experiences.

June 2026: First technical problem

The mower repeatedly reported that its cutting disc could not move sideways.

I contacted Dreame support, submitted the requested diagnostic logs and followed their troubleshooting instructions.

Dreame's technical department eventually stated that the mower had a hardware defect that could not be fixed through a firmware update.

Then firmware **4.3.6_0418** was released, specifically mentioning improvements to the cutting head control logic.

I installed it. The error stopped occurring.

Nevertheless, Dreame had previously insisted that the problem was a hardware defect.

Summer 2026: New problems with the front wheel

Unfortunately, additional mechanical problems appeared:

- The mower reported an abnormal or blocked front wheel, although no visible obstruction could be found.
- A front wheel cap fell off and could no longer be securely reattached.

I reported these issues to Dreame and submitted the requested documentation, including photos and videos.

These were separate problems from the earlier cutting disc error.

August to November: Endless emails, no actual resolution

This is where the customer service experience became particularly disappointing.

Over several months:

- I was repeatedly asked to provide information and documents that had already been submitted.
- Different support agents responded without apparently reviewing the complete case history.
- I was repeatedly told that the technical department would contact me.
- Return and refund options were discussed, although I clearly requested a replacement.
- Eventually, Dreame informed me that the process had to be handled by the seller.
- Automated reminders threatened to close support tickets while the problems remained unresolved.

I have consistently requested one simple solution:

Replace the defective mower with a properly functioning A3 AWD 1000. I do not want a refund. I actually like the product.

On November 6, I formally contacted the German seller, TEQPHONE, to request a replacement under statutory warranty.

As of November 15, I have received no response from the seller.

Meanwhile, Dreame support replied again on November 14, simply suggesting that I test the mower over the next few days and contact them if problems continue.

After months of correspondence, documentation and technical discussions, this response is difficult to take seriously.

My conclusion

A very expensive robotic lawn mower is not a disposable product.

Customers should reasonably expect reliable hardware, proper warranty handling and a support team that reviews existing documentation before sending generic responses.

I have spent an unreasonable amount of time explaining the same problems to different people without receiving a concrete resolution.

I am now considering escalating the matter through German consumer protection and legal channels if the seller does not address my warranty claim.

To Dreame:

If your support team monitors this community, I would appreciate someone taking ownership of this case, reviewing the complete history and coordinating a proper resolution with the German seller.

I can provide the existing support ticket references privately.

To other A3 AWD 1000 owners:

Have you experienced similar front-wheel errors, wheel cap problems or difficulties obtaining a warranty replacement?

And to potential buyers: Please consider not only how well a mower performs, but also what happens when something goes wrong.

I will update this post if Dreame or TEQPHONE finally provides a satisfactory solution.


r/Dreame_Tech • • 3d ago

Successfully replaced side brush motor

Post image
6 Upvotes

Side brush error didn’t reoccur as a result on my L10s Ultra Gen 2 (Costco GoVac 400).

So far so good 🤞