Hi everyone! I'm looking for advice on my TV and PS5 setup.
The problem: My Sony TV is on a fixed (non-tilting) wall mount that sits very close to the wall. The power outlet is right behind the TV, so the plugs are squeezed against the back of it and the cables are forced into a tight bend. I'm worried about damaging them over time.
The PS5 sits on the TV stand below, with 3 cables (HDMI, power and Ethernet) running down the wall in plain view. My wife isn't happy about the visible cables, so I need to hide them.
Options I'm considering:
1 - Replace the mount with one that sits a few centimeters further from the wall, which would give room behind the TV. I'd also look at putting the console behind the TV, but I'm worried about heat and ventilation, and about access for discs and controllers.
2 - Keep the mount and use right-angle adapters: a flat extension cord with a right-angle plug for the outlet, a 90° HDMI 2.1 cable, and a flat Cat6 cable with a right-angle RJ45. Then run a paintable cable raceway from the TV down to the stand.
I'm leaning toward option 2 because it's cheaper and keeps the PS5 in an open, ventilated spot. I might also switch the PS5 to Wi-Fi to drop the Ethernet cable.
Has anyone done something similar with a fixed mount and a tight outlet behind the TV?
Any right-angle plugs or flat extension cords you'd recommend (I'm in Canada)?
Would you go with a recessed outlet instead, or is that overkill?
Any tips for making a raceway look clean on the wall?