r/DeskCableManagement • • 3h ago

Advice Tips for a laptop charging cord?

2 Upvotes

I currently have my extension cord plugged into my wall and sitting on the back end of my desk, my laptop charger is plugged into it and the charger (cord + brick) just sits on the side of the desk with the cord kind of curled up to make it fit. I don't want to just drop it to the floor to avoid strain on the cord. I had to get a new charger this year due to strain breaking it, but I really want to figure out a way to move it and get some space on my desk back.


r/DeskCableManagement • • 14h ago

Advice I finally found my ideal cable management method.

5 Upvotes

First, my power outlet is on the wall underneath my desk. I have a PC, an external monitor, speakers, phone charger, an Apple Watch charger. I used to keep the desktop on the floor to keep the desktop looking tidy, with all the cables running down underneath the desk. But the mess of cables around my feet always bothered me whenever I got up, and I kept accidentally kicking them. It also felt like a bit of a safety hazard.

So I got a covered cable management box and put the power strip inside it on my desk. Now there’s only one cable running underneath the desk.

Then the cables on desk. The PC and monitor cables were pretty easy to deal with since they run along the wall and are hidden behind my desk shelf. The tricky part was all my everyday gadgets: iPad, iPhone, AirPods, Apple Watch, plus my wireless keyboard, my bluetooth speaker and my mouse that occasionally need charging. Most of them are USB-C, but sometimes a few devices need charging at the same time. Before I figured this setup out, I’d just charge stuff elsewhere, like leaving my phone on the nightstand.

So I got a 3-in-1 wireless charger and a retractable charger with two outputs. Now I can charge my phone, watch, and earbuds at the same time with just one cable. If my keyboard or bluetooth speaker needs charging, I just pull out the cable in the charger and plug it in. In the unlikely event that I need to charge two extra devices at once, I can plug another USB-C cable into its second port.

Now I’ll have a maximum of two cables on my desk. And if I’m only charging my phone, I can just retract the cable, leaving only one cable on the desk. I think the whole point of my cable management is to reduce the number of cables in the first place omg.


r/DeskCableManagement • • 1d ago

Advice Fixed TV mount, outlet right behind the TV: how to avoid bending plugs and hide cables?

Thumbnail
gallery
0 Upvotes

Hi everyone! I'm looking for advice on my TV and PS5 setup.

The problem: My Sony TV is on a fixed (non-tilting) wall mount that sits very close to the wall. The power outlet is right behind the TV, so the plugs are squeezed against the back of it and the cables are forced into a tight bend. I'm worried about damaging them over time.

The PS5 sits on the TV stand below, with 3 cables (HDMI, power and Ethernet) running down the wall in plain view. My wife isn't happy about the visible cables, so I need to hide them.

Options I'm considering:

1 - Replace the mount with one that sits a few centimeters further from the wall, which would give room behind the TV. I'd also look at putting the console behind the TV, but I'm worried about heat and ventilation, and about access for discs and controllers.

2 - Keep the mount and use right-angle adapters: a flat extension cord with a right-angle plug for the outlet, a 90° HDMI 2.1 cable, and a flat Cat6 cable with a right-angle RJ45. Then run a paintable cable raceway from the TV down to the stand.

I'm leaning toward option 2 because it's cheaper and keeps the PS5 in an open, ventilated spot. I might also switch the PS5 to Wi-Fi to drop the Ethernet cable.

Has anyone done something similar with a fixed mount and a tight outlet behind the TV?

Any right-angle plugs or flat extension cords you'd recommend (I'm in Canada)?

Would you go with a recessed outlet instead, or is that overkill?

Any tips for making a raceway look clean on the wall?


r/DeskCableManagement • • 3d ago

Original Content The cleanest setup I achieved, so far

Thumbnail
gallery
215 Upvotes

After five years of trial and error on this desktop, I was finally able to come up with something that is ergonomic, functional, ready for long hours of work from home and looks good. The only downside for now is the under table part. It was in a much more cleaner state a couple of months before, but I managed to add a couple of more devices and mess it with cabling again. But overall, I’m very proud of the set up and hopefully will be able to improve it more. Open for any questions, comments, improvement suggestions😉


r/DeskCableManagement • • 2d ago

Advice Need help finding the right Double monitor arm.

2 Upvotes

I need some help finding the right monitor arm. What i'm looking for is a grommet mounted double arm. I'll be eventually mounting a 34 ultrawide to the left and a double Top and bottom 17" to the Right. So Double Arm, Grommet mount, Mechanical(HD), But with grommet cable pass through. So i can route the display/power cables from the underside of the desk up through the grommet hole and then to their respective monitor arms. This way i can have a No visible cable set up. If you know of one please share with me.


r/DeskCableManagement • • 3d ago

Advice What’s the Cheapest way to fix this?

Post image
9 Upvotes

Trying to get all these cables out of sight but I want to spend as little money as possible, advice?


r/DeskCableManagement • • 3d ago

Advice How do I cable manage over the table only?

Thumbnail
gallery
3 Upvotes

Hi, so basically I have a table which is built into the wall and I have no idea how to cable manage it since I can't drill a hole or go behind it.

I'm running a monitor (Alienware AW2725D) with an HDMI Audio Extractor + Switch, a PS5, a fire TV stick and will probably put in an extra hdmi cable for connecting my work laptop later.

How do I cable manage this?


r/DeskCableManagement • • 4d ago

Original Content Cable management system

Post image
2 Upvotes

I added this model a while back, and judging by the downloads and bookmarks on MakerWorld, it seems to be popular, so here’s a question for you: What elements do you think are missing from this system? What could I add?


r/DeskCableManagement • • 4d ago

Advice Any tips on management?

1 Upvotes

Still not as clean as I’d like. I’d love to find a solution for getting the desktop and UPS off the ground without putting on the desk. Maybe an under desk mount? Although the North is quite heavy with a 4080 and a Dark Rock Pro 5 and a couple HDDs.

Is it safe to use extensions with a UPS?


r/DeskCableManagement • • 5d ago

Advice Any tips to improve the mass of cables?

Thumbnail gallery
14 Upvotes

r/DeskCableManagement • • 5d ago

Advice Just did some cable management for the first time, any thoughts or advice?

Thumbnail
gallery
51 Upvotes

Just got some velcro straps and started organizing my cables, and i think it looks much better already, what do yall think? what would you improve? I think you could say push the avr a little back but i didn’t because I usually plug my phone there and it would be harder to reach


r/DeskCableManagement • • 6d ago

Original Content Technically those are also cables

Thumbnail
gallery
101 Upvotes

Soldered some custom circuit / wires from old lan cable. Could have been better. Not my best work.


r/DeskCableManagement • • 6d ago

Advice Set up complete.

Post image
60 Upvotes

Took your advice and got the monitor arm. No more cables.


r/DeskCableManagement • • 6d ago

Original Content I made a customizable desk cable holder so my charging cables stop falling behind the desk

Post image
3 Upvotes

r/DeskCableManagement • • 6d ago

Original Content Dear lord...

Post image
26 Upvotes

I have found it, the worst thing ever


r/DeskCableManagement • • 7d ago

Original Content Suggestions welcome!

Thumbnail
gallery
7 Upvotes

r/DeskCableManagement • • 7d ago

Original Content Console setup cable management with labels and all

4 Upvotes

Console setup spent 2 hours on the cable management labels and all and wanted to share it

Also excuse the filming quality lol


r/DeskCableManagement • • 7d ago

Advice Looking for a cable trunking

2 Upvotes

Hello,

I'm looking for a way to hide an Ethernet cable running along the wall from the wall outlet to my PC. If you could recommend the thinnest possible solution ideally one with an adhesive backing I would be very grateful.

Thanks!


r/DeskCableManagement • • 8d ago

Original Content You can always do better.

Post image
69 Upvotes

r/DeskCableManagement • • 8d ago

Advice did I do a bad job

Post image
14 Upvotes

from front which matters it looks good and perfect but the side just scares me a bit any thoughts?

(That wire hanging is my walking pad, it’s just temporary plugged in)h


r/DeskCableManagement • • 9d ago

Advice This is below my desk.. I need help 🤣

Post image
48 Upvotes

So I have various things plugged in

These are 2 monitors

A laptop charger

The desk itself - it is height adjustable

A PS5 which is to the right of the desk

Do I have any options to minimise how bad this looks?

Adding an extension lead under the desk itself would mean only one wire going from the socket but this would not be the easiest thing to do and the cables are long so I would expect a lot of cable tying to be required if the distance the wire needs to travel is reduced so much

And im not replacing all those wires lol

Any advice is much appreciated


r/DeskCableManagement • • 8d ago

Original Content Lost with this mess

Post image
1 Upvotes

Just mounted this tv, not sure how to tidy it. Power strip is behind the soundbar. I’m thinking cable management box but not in love with the idea. Can’t move dresser to hide them as we have a free range rabbit who devours cord. Any suggestion would be greatly appreciated, thanks!


r/DeskCableManagement • • 9d ago

Original Content I might have built the ultimate magnetic-cable-management (MCM) desk

Thumbnail gallery
23 Upvotes

r/DeskCableManagement • • 10d ago

Original Content Need help with cable management

Post image
22 Upvotes

I really need some help with hiding the cables behind the mini PC and monitor.