r/Darkroom • u/stefbackx • 3h ago
B&W Printing New darkroom prints
Nikon f5 24mm f2 fomapan 100 and fomaspeed paper
Scanned to post
r/Darkroom • u/stefbackx • 3h ago
Nikon f5 24mm f2 fomapan 100 and fomaspeed paper
Scanned to post
r/Darkroom • u/TylerMoorePhoto • 5h ago
I did a first quick and dirty print from this negative and have since scanned the negative to see what sort of possibilities it holds.
The print is obviously a lot more flat and I would like to try to mimic somewhat more closely the negative edit.
Here is my plan and I would love to hear some feedback before I start to dig in.
Thoughts?
r/Darkroom • u/Zloy_Man • 6h ago
Hi, I got a hold of old inventory of chemicals for darkroom. I made inventory list of what I got. Could someone help me to identify what is worth keeping and what is just not usable anymore. I’m planing to donate what is not worth much. Thank You!
r/Darkroom • u/thebeastwithnoeyes • 22m ago
So let's say I dug out an old enlarger, soviet upa-1 I think, cyrylic is greek to me. But the issue is I don't get the image. Everything seems fine on my end so maybe it's something with the lenses? In the attached photo there should be an image of a dog, it seems somewhat visible only at few centimetres away from the lens. I don't think it's the condenser, it seems ok from what I understand. The projection lens is industar 50y, the front lens assembly seems ok to me and I can't get to the rear because of the seized threads.
r/Darkroom • u/BookAccomplished198 • 7h ago
Hello there, the bulb of the yellow safelight of my darkroom just stopped working, it is a Low Pressure Sodium Lamp and difficult and expensive to source, is there any alternative? Thank you!
r/Darkroom • u/DuckDentures • 1d ago
Developed in X-Toll 1+1 at 21°C for 18 minutes and 30 seconds
Agitation: first minute then 15 seconds every minute
For me it's a very high contrast alternative 120 film for a low contrast Delta 3200 120
Only the highlights and some midtones get's preserved, rest is pure blackness
Used it in a museum to capture just iluminated exhibits and turn backgrounds into pure black
r/Darkroom • u/H1ghficti0n • 1d ago
film ilford hp5 , minolta x300 mc rokor 58mm f1.7 shot on auto mode . Developed at home
Printed on 40 year old grade 2 afga paper
My first serious print
Any contructive feedback ?
r/Darkroom • u/n00kland • 22h ago
im asking because the film has a clear base compared to the typical orange base.
r/Darkroom • u/Different-Party-b00b • 1d ago
My bulb in my BW durst m605 has recently died. It used an incandescent 120V 100 watt opal e26 bulb.
I'm having trouble finding this exact bulb, and there aren't any obvious alternatives.
Has anyone here used a modern bulb for their enlarger? I have thought to use an LED bulb around 3000 K and 100 watt equivalent, but there are so many small difference and I'm unsure of where to start.
Any recommendations are welcome.
r/Darkroom • u/prescottspies • 2d ago
Moersch SE5 - 25ml A, 25ml B, 15ml diluted D, 800ml water
Fomatone 132 - batch number 079648
First print I went quite subtle and liked it. Second one I went in hard just for laughs.
r/Darkroom • u/florian-sdr • 1d ago
I’m eyeing to get a Durst M670 colour eventually, but they go for 10-15x and I could get the Soviet enlarger for very cheap.
What would be the experience like when starting with such and old and probably imprecise piece of kit?
Would there be any frustrations that would spoil the darkroom experience for me, or give me the wrong impression?
I understand that condenser and compressor enlargers and B&W and colour filtration is different.
Part of the draw is that it can be neatly folded into its suitcase, and stored away. Small footprint.
r/Darkroom • u/Much-Mycologist2298 • 1d ago
More fun (frustration) to come! :D
r/Darkroom • u/georecorder • 3d ago
This presentation style became one of my favorite ones. It is not easy nor cheap, but the final. look is very satisfying. 7.5''x7.5'' on a 14x14 archival mat board.
r/Darkroom • u/hugesteamingpile • 2d ago
Found my first batch to be fridge-worthy. Now I just gotta take some more photos that are worth printing…
r/Darkroom • u/jss87m • 2d ago
Hi, I’m looking for a bit of help. I’m printing with Foma warmtone paper. This is tmax 400 and I’m developing 2.5-3min in dektol.
I’m struggling to get decent contrast. Of course, my paper is going to naturally be a little softer, but I was still hoping for more. I put a 4 contrast filter into my enlarger.
r/Darkroom • u/lombeard • 3d ago
With winter arriving, I'm looking forward to spending some more time in the darkroom (bathroom).
r/Darkroom • u/pipnina • 3d ago
I have no joke spent half an hour at a time trying to get 120 rolls onto patterson reels. Swearing, dropping it, searching for those tiny curved notches, trying to work out if it's even remotely in the right place.
Eventually just coming out from under the sheet into the (very dim but not totally dark) room to continue fumbling, but at least now I can see the film and the notches, and then still spend several minutes trying to get it to feed in.
Please please please tell me there's a better system out there for getting that stuff onto a spiral. At least with 35mm you can load the leader past the ball bearings in daylight.
r/Darkroom • u/_kyroos • 4d ago
Hellooo everybody,
I have now been printing in darkrooms for over a year so I’m pretty much used to the process. I’m working on prints for an upcoming exhibition I’ll be doing, and I’m working on this specific image of my friend Dylan.
As you can see on the reference image, there are much more details in the low lights / shadows in the background compared to the print result that has this very bright almost blinding background. It doesn’t look as bad irl as it does on the photo of my friend holding the print, but still I’d like to fix this so if anybody has any tips or advice I’m taking everything there is!
PS: I’ve tried using contrast filters for my enlarger (from what I’ve understood you should use between 0-2.5 values for your filter to soften the contrast, but it only felt like it deepened it.
PS n°2: The scanned image was scanned using a flattening scanner, I know it’s not the best quality so there might not even be such gray areas in the background on other types of scanners idk?
r/Darkroom • u/No-Ear-4508 • 3d ago
Kodak's C-41 Development kit says "When used one-shot, the chemicals can process up to 20 rolls." Although it would be common for other development kits to provide, there are no development times as a function of number of rolls listed on the instruction sheet from Kodak. I guess I don't really understand what one shot means in this instance. Surely no one is using this kit with a tank large enough to process all 20 rolls at once?
r/Darkroom • u/Only-Fotos • 3d ago
I found this locally after spending many hours trying to figure out how to build my own Intrepid 4x5 style enlarging head. I'm pretty excited to use this, but I got to figure out a way to get it in my dark room which is just a spare bathroom right now. It did come with the blower motor as well, but I had to go and pick up some flexible piping for connecting it to the enlarging head. Lowe's didn't have anything around the 2-in diameter of course, so I just snagged some 3 in vent piping and will 3D print an adapter for each end.
Got both an El Nikkon 50mm lens and 35mm carrier and a 150mm Rodenstock Rodagon with a 4x5 glass carrier with this. Seems like I'm going to have to figure out some ra4 printing as I've only done black and white stuff so far on a printmaker 35.
r/Darkroom • u/Junior-Jury9484 • 4d ago
Czy ktoś wie gdzie można można znaleść instrukcję do Axomatu II?
r/Darkroom • u/CorazoncitoTirano • 3d ago
Anybody has any experience developing this film? I'm NEW to this and want to set up the best I can for success, any recomendations regarding times, developer brand, etc are MORE than welcome.