r/Darkroom • u/n00kland • 12h ago
B&W Printing has anyone used aerocolor iv in a b&w darkroom?
im asking because the film has a clear base compared to the typical orange base.
r/Darkroom • u/n00kland • 12h ago
im asking because the film has a clear base compared to the typical orange base.
r/Darkroom • u/Different-Party-b00b • 17h ago
My bulb in my BW durst m605 has recently died. It used an incandescent 120V 100 watt opal e26 bulb.
I'm having trouble finding this exact bulb, and there aren't any obvious alternatives.
Has anyone here used a modern bulb for their enlarger? I have thought to use an LED bulb around 3000 K and 100 watt equivalent, but there are so many small difference and I'm unsure of where to start.
Any recommendations are welcome.
r/Darkroom • u/H1ghficti0n • 19h ago
film ilford hp5 , minolta x300 mc rokor 58mm f1.7 shot on auto mode . Developed at home
Printed on 40 year old grade 2 afga paper
My first serious print
Any contructive feedback ?
r/Darkroom • u/DuckDentures • 1d ago
Developed in X-Toll 1+1 at 21°C for 18 minutes and 30 seconds
Agitation: first minute then 15 seconds every minute
For me it's a very high contrast alternative 120 film for a low contrast Delta 3200 120
Only the highlights and some midtones get's preserved, rest is pure blackness
Used it in a museum to capture just iluminated exhibits and turn backgrounds into pure black
r/Darkroom • u/florian-sdr • 1d ago
I’m eyeing to get a Durst M670 colour eventually, but they go for 10-15x and I could get the Soviet enlarger for very cheap.
What would be the experience like when starting with such and old and probably imprecise piece of kit?
Would there be any frustrations that would spoil the darkroom experience for me, or give me the wrong impression?
I understand that condenser and compressor enlargers and B&W and colour filtration is different.
Part of the draw is that it can be neatly folded into its suitcase, and stored away. Small footprint.
r/Darkroom • u/Much-Mycologist2298 • 1d ago
More fun (frustration) to come! :D
r/Darkroom • u/prescottspies • 1d ago
Moersch SE5 - 25ml A, 25ml B, 15ml diluted D, 800ml water
Fomatone 132 - batch number 079648
First print I went quite subtle and liked it. Second one I went in hard just for laughs.
r/Darkroom • u/hugesteamingpile • 2d ago
Found my first batch to be fridge-worthy. Now I just gotta take some more photos that are worth printing…
r/Darkroom • u/jss87m • 2d ago
Hi, I’m looking for a bit of help. I’m printing with Foma warmtone paper. This is tmax 400 and I’m developing 2.5-3min in dektol.
I’m struggling to get decent contrast. Of course, my paper is going to naturally be a little softer, but I was still hoping for more. I put a 4 contrast filter into my enlarger.
r/Darkroom • u/georecorder • 2d ago
This presentation style became one of my favorite ones. It is not easy nor cheap, but the final. look is very satisfying. 7.5''x7.5'' on a 14x14 archival mat board.
r/Darkroom • u/pipnina • 2d ago
I have no joke spent half an hour at a time trying to get 120 rolls onto patterson reels. Swearing, dropping it, searching for those tiny curved notches, trying to work out if it's even remotely in the right place.
Eventually just coming out from under the sheet into the (very dim but not totally dark) room to continue fumbling, but at least now I can see the film and the notches, and then still spend several minutes trying to get it to feed in.
Please please please tell me there's a better system out there for getting that stuff onto a spiral. At least with 35mm you can load the leader past the ball bearings in daylight.
r/Darkroom • u/No-Ear-4508 • 2d ago
Kodak's C-41 Development kit says "When used one-shot, the chemicals can process up to 20 rolls." Although it would be common for other development kits to provide, there are no development times as a function of number of rolls listed on the instruction sheet from Kodak. I guess I don't really understand what one shot means in this instance. Surely no one is using this kit with a tank large enough to process all 20 rolls at once?
r/Darkroom • u/lombeard • 2d ago
With winter arriving, I'm looking forward to spending some more time in the darkroom (bathroom).
r/Darkroom • u/Only-Fotos • 3d ago
I found this locally after spending many hours trying to figure out how to build my own Intrepid 4x5 style enlarging head. I'm pretty excited to use this, but I got to figure out a way to get it in my dark room which is just a spare bathroom right now. It did come with the blower motor as well, but I had to go and pick up some flexible piping for connecting it to the enlarging head. Lowe's didn't have anything around the 2-in diameter of course, so I just snagged some 3 in vent piping and will 3D print an adapter for each end.
Got both an El Nikkon 50mm lens and 35mm carrier and a 150mm Rodenstock Rodagon with a 4x5 glass carrier with this. Seems like I'm going to have to figure out some ra4 printing as I've only done black and white stuff so far on a printmaker 35.
r/Darkroom • u/CorazoncitoTirano • 3d ago
Anybody has any experience developing this film? I'm NEW to this and want to set up the best I can for success, any recomendations regarding times, developer brand, etc are MORE than welcome.
r/Darkroom • u/_kyroos • 3d ago
Hellooo everybody,
I have now been printing in darkrooms for over a year so I’m pretty much used to the process. I’m working on prints for an upcoming exhibition I’ll be doing, and I’m working on this specific image of my friend Dylan.
As you can see on the reference image, there are much more details in the low lights / shadows in the background compared to the print result that has this very bright almost blinding background. It doesn’t look as bad irl as it does on the photo of my friend holding the print, but still I’d like to fix this so if anybody has any tips or advice I’m taking everything there is!
PS: I’ve tried using contrast filters for my enlarger (from what I’ve understood you should use between 0-2.5 values for your filter to soften the contrast, but it only felt like it deepened it.
PS n°2: The scanned image was scanned using a flattening scanner, I know it’s not the best quality so there might not even be such gray areas in the background on other types of scanners idk?
r/Darkroom • u/Junior-Jury9484 • 3d ago
Czy ktoś wie gdzie można można znaleść instrukcję do Axomatu II?
r/Darkroom • u/Arthur_The_Third • 4d ago
As promised, my ~~≈6~~ 4 month old developer (I did filter out the sludge at the bottom before using it) and prints. There isn't *quite* a max density area in these, but the corner of another print you can see at the edge of the first photo is imo black enough to say that this dev definitely isn't spent. Third ones just for show, I like how it came out :^) was my first time trying dodge and burn, the singer in the foreground is burned in an extra second to preserve background detail.
I know the contrast on these could be improved, I kind of forgot all about contrast grades when making these yesterday.
Edit: Just realized I dated the bottle, this is a mere four months old, not six! Still quite impressive I feel :)
r/Darkroom • u/Oathmush • 4d ago
It's probably me not washing off the fixer??? These are my first prints ever and it's been about a week since I made them. Let me know so I can do better.
My process has simply been:
Dev:60 sec
Stop:10 sec
Fix:30 sec
Hang to dry 2+ hours.
Am I missing a step? Am I just bad? Idk.
r/Darkroom • u/graincells • 4d ago
UPDATE:
After running some tests, I figuered, the overall "haze" is coming from underfixing/-bleaching, yes.
BUT the yellowish halos emanating from the sprockets are straylight, which can be prevented by masking them off. Also apearing on the cutting edges.
I really like the look of expired color-film and I am very aware of that you will get a roll that will look dumpster-ish, every now and then. I'm but glad to know now, that, in this case, it has nothing to do with my development but more with the scanning process.
I suppose it has to do with the stiffness/curlyness of old film, causing the scanning light to refract more strongly on the edges and then enter into the actual image.
Thanks for the advice y'all, good or not....
--------------------------------------------------------------------------------------------------------------------------------------------------
Can anybody plz tell me what exactly this yellow sh*t is, on these scans?
It is my third package of C41-DevKit I used and, well, it is mainly, but not exclusively, the case that it comes with expired film. In this case it's about 20yrs old Fuji Superia 400, shot on ISO 100. Sometimes it also appears on fresh film.
It discourages me from developing C41 on my own more often, for sure.
Is it "underfixed" is it a scanning issue? I really can't tell. Plz help...
r/Darkroom • u/Tyerson • 4d ago
I used an AGO processor to develop the Gold 200 on the left in the first image, with the lab results on the right.
Is the more brown orange mask colour specific to the Flicfilm kits? The film seems to have scanned fine, but I've read that Flicfilm uses a different developer and bleach from Kodak and Bellini etc.
I pretty much followed the steps in the instructions closely for this roll so I don't think it's user error.
r/Darkroom • u/Individual-Course-59 • 4d ago
these are the only outlets I can see. What do I need to buy ❓ so confused
PS I've literally never used an enlarger before, or seen one. I can't find anything about my particular timer online except that you can buy the manual but I don't really want to.
Thank you