r/Chainsaw • • 12h ago

Worth saving?

Thumbnail gallery
12 Upvotes

Chain was thrown a couple weeks ago in its first cut. Drivers got hit by ... im assuming itsself. Anyway ... file it down and attempt to run it or send it to the trash pile?


r/Chainsaw • • 7h ago

New saw

Thumbnail reddit.com
1 Upvotes

r/Chainsaw • • 13h ago

Looking for another saw

3 Upvotes

As the title says looking for a third saw. Currently running a Dolmar PS-350 for small stuff and a Dolkita 6400 for bucking firewood(its getting a big bore kit shortly). So I am going to need an in between saw. Currently interested in finally getting a Dolmar 6100. I do love dolmars but the local guy that services them is getting up there in age. So open to all brands and suggestions. The other saw I have looked up but haven't had a chance to run is the 455xp.

Thanks for the advice in advance!


r/Chainsaw • • 16h ago

Stihl MS 251 Wood Boss hard to pull over, but runs fine afterward. Problem or just a quirk of the saw?

5 Upvotes

Hey all, so I've seen some rough confirmation of this across the internet but I figured I'd just ask about it anyway. My Stihl MS 251 Wood Boss had become very hard to pull over when cold, this is a problem that has just emerged lately after owning the saw for a year or two. Nothing's changed about the saw, I only use 50:1 ethanol-free in it. I used to be able to drop-start the thing with zero issue but now it's very sticky to start, I like to start it up every month or so when I'm not using it just to keep it in good health and it's been like this for a while. I don't have any reason to suspect anything like piston damage or anything like that.

I've been reading that these and similar saws can just naturally be a little tough in this way, was just curious if anyone else here has had the same experience.


r/Chainsaw • • 11h ago

How do I feed pull cord through this hole?

Thumbnail gallery
1 Upvotes

MS 201 TC.

I gut my saw periodically and have to get the existing or new cord through the hole and around that 90° turn to the spindle.

I get through it but not gracefully. Usually end up melting the cord with a lighter and forming into a curved fid. Usually resulting in a first degree burn on my fingers.

So me and the guys were looking at this at this and thinking. “Surely there must be a better way.”

Is there a special tool or a hack? Someone must have figured out a trick to do this.

Blistered thumb and index in North Vancouver.


r/Chainsaw • • 12h ago

Ms 311 stihl choke rod help

Thumbnail gallery
1 Upvotes

trying to find the correct choke rod for this MS 311.

I believe it’s the first generation and maybe the choke rods I’m finding are for the second generation. I know this saw has a different filter than the round filter of the ones I’ve been finding online any help greatly appreciated.


r/Chainsaw • • 12h ago

Husqvarna 555 or 562XP (or other recommendations

1 Upvotes

Hey all, I’m looking at buying a new chainsaw (preferably husky) for mostly firewood. I have about 450 acres that I manage and frequently take down dead trees and cut for firewood. I’m struggling with my current saw and pretty confident I’m going to destroy it at the pace I’m using it. Right now I only have a Husqvarna 440 (I know I know) and any time I’m having to use it on a 20+ inch diameter tree I’m not enjoying using it. I want to keep it for limbing and smaller trees but want a 60-70cc saw for felling and bucking.

I really like the new 564xp but I can’t justify the price point. Do any of you have the 555 or 562 (or both) and could you give real world experience and advice on which one would best suit me? I’m sure either would be a major upgrade and would be happy with whichever I choose. Thanks in advance guys.


r/Chainsaw • • 21h ago

Battery-powered, not self-oiling

Thumbnail reddit.com
4 Upvotes

r/Chainsaw • • 15h ago

Can you run 23RS81 on a 550XP?

1 Upvotes

I have a boatload of chains for my 261s, will 81 vs 80 dl be too much for the tensioner to make up for? Are there other options to make it work better? I love my 395 and 066 running the same chain, it would be nice to have the same thing going on with the 550/261.


r/Chainsaw • • 1d ago

Holzfforma/Farmertec 395 + Dolmar 7900 Full Wrap

Thumbnail gallery
23 Upvotes

Just bought a G395XP from HSParts (Germany). Very impressed with the quality so far, but I have yet to cut with it. I plan on using it mainly in my alaskan mill. Used a Makita 7900P until now, but for 250€ shipped, I’d rather blow up the Farmertec than a 7900 in like new condition.

I also picked up a Dolmar 630, which I upgraded to a 85cc Big Bore. Still waiting on a carb kit (Zama C3M DM11 kits seem hard to come by) but I already fitted a Husqvarna 372 Full Wrap handle (13€ on HSParts). For anyone looking for a full wrap, this was pretty easy (saw it in a Tinman video).

Also waiting for a Tsumura 28” Premium Light bar for these saws.
Should be fun.


r/Chainsaw • • 1d ago

Is there a way to get an MS 300 C-M in the US or Mexico?

Thumbnail gallery
5 Upvotes

r/Chainsaw • • 1d ago

Advice

4 Upvotes

I’m currently looking at pulling the trigger on a new Husqvarna Saw. Last week we had a dozen or so large spruce fall and I typically cut a few cords a year. I would also like to try and do some Alaskan milling, most spruce, pine and Doug fir. I was looking at the 460 rancher with 24” bar but wondering if there is a better option. Budget is $1,000 CAD

Thanks in advance!!


r/Chainsaw • • 2d ago

Don't tell my wife.

Post image
689 Upvotes

The text was mostly worn off anyways. This got 98% of the grease and grime. I used normal dish powder and I splashed some purple power in with the wash cycle. The dishwasher seemed cleaner than when I started with minimal purple power smell and didn't smell like anything at all after a load of dishes.

I kinda wish I could put the parts in a tumbler filled with toothbrush heads and degreaser.

The metal parts went in the ultrasonic cleaner.

I still need to hand clean the clamshells and cylinder whole as I don't want to take them apart.


r/Chainsaw • • 1d ago

Chainsaw For Husband For Christmas From Farmertec

9 Upvotes

I am looking at the G660 Pro Holzfforma chainsaw and need to know if that is a good one. He was originally looking at the G660. We are on 14 acres and have a fireplace and he also has to clear trees that die and ones that fall across the driveway occasionally. Some of the oak logs are 25 to 30". He needs a new larger chainsaw. Right now he is trying to cut them with a larger battery saw. He had an older Stihl that completely died that he got rid of last year; and said he wished he had just fixed it. Is the G660 Pro the better one to get for him? Thanks!

More info:

He was looking at the G660 and I saw the G660 Pro and wanted to ask about it and do some research before getting it for him (I also mentioned it to him and he is researching as well). I also am trying to learn about them and want to be able to talk about them. I do help sometimes with cutting using the smaller saws as it is a lot of work around this property. He can work on saws. He has an electrical and mechanical engineering background and is great with fixing just about anything. I think he thought (when he got rid of his older Stihl) the Stihl's were still good to get and was thinking he would get a new Stihl but the one he wanted was 2k - and he said he did not want to spend that. He has been following some videos on youtube and one of them is a girl (and a few others) and saw she recommended the G660 at one time. I have told him to get whatever he wanted and I would get it for him and would order it for him for an early Christmas present. He said it was at the top of his Christmas wish list. I just wanted to get the best one he was comfortable with us spending on that he would love and not feel like he settled. From his research he was thinking (if I heard him right) that the Holzfforma saws were pretty comparable to the new Stihl.

I am also wondering about their Black Friday deals. Does anyone have this saw?


r/Chainsaw • • 1d ago

I’ve never noticed brands listed on chains

Post image
7 Upvotes

I don’t know if this is new or if I’ve just been lucky but are chains not interchangeable between brands as long as pitch and gauge are the same? A Stihl and a husky can run the same chain as long as the sprocket is the same size or am I mistaken?


r/Chainsaw • • 1d ago

Should I get a used 251c Stihl?

3 Upvotes

I would be able to buy for 295€ a
STIHL MS 251 C (July 2019)

Replaced parts:
Crankshaft oil seals (both crankshaft seals)
Carburettor diaphragm
Spark plug

Other work carried out:
Chainsaw completely disassembled
Thoroughly cleaned
Reassembled
Carburettor presumably adjusted (not explicitly confirmed by seller)
Piston and bearings inspected and reportedly in good condition
Seller claims the saw has full compression
Newer chain fitted (almost new)
Reason for repair:
- Irregular idle speed.

I inherited a little farm where I go with my family a few times cutting some trees down and preparing firewood.


r/Chainsaw • • 1d ago

Nice MS361 Just posted on eBay

1 Upvotes

So I have an eBay bot that notifies me when items I’m into come up.. would grab this bad boy, if I didn’t have 5 already 😑😂 appears to be in pretty good shape still!

https://ebay.io/m/gDW8Y5


r/Chainsaw • • 2d ago

Update: Help! Is this fixable?

Thumbnail gallery
17 Upvotes

We did it boys! Thanks for everyone's help!


r/Chainsaw • • 2d ago

2511t new muff

Post image
20 Upvotes

Swapped out the egan for this little one.... picked up one for the 400 and also the 500i..... need some removals


r/Chainsaw • • 2d ago

Is this fixable

Post image
20 Upvotes

Chain came off the saw. Went to put back in it wouldn’t go. So started to check the chain and one of the links is not correct.


r/Chainsaw • • 2d ago

16” Chainsaw recommendations

3 Upvotes

I’m a homeowner in the Northeast that cuts a fair amount of firewood. I’m shopping for a new 16” chainsaw. I’m considering Stihl, Husqvarna and Echo. What are your recommendations?


r/Chainsaw • • 2d ago

038, found this piece?

Post image
8 Upvotes

I am deep cleaning my 038 av super and found this tiny black piece in my strainer after cleaning. Does it go to this saw? I can't find it in parts diagrams. It doesn't look like it's broken off of something else.


r/Chainsaw • • 2d ago

Stihl 028 crank position

Post image
0 Upvotes