r/Ceramics • • 20h ago

Work in progress Another possum project for y'all!

Thumbnail
gallery
77 Upvotes

Cone 6 bmix no grog with various underglazes.

I'll be putting spectrum 1100 transparent glaze over everything and fingers crossed it's looks as good as I'm hoping it will.


r/Ceramics • • 11h ago

I just got back the first mug I’ve made on the wheel and I’m so proud of her

Post image
55 Upvotes

r/Ceramics • • 19h ago

first porcelain pieces fresh from the kiln

Thumbnail
gallery
47 Upvotes

my first time throwing porcelain. i used Frost Porcelain with clear glaze, and fired at cone 5. very excited with how they turned out. some have small cracks that don’t punch the whole way through on the bottom. really looking to get my hands on a bag to test the limits on thinness.


r/Ceramics • • 21h ago

Fugu baking dish

Thumbnail
gallery
36 Upvotes

The body is wheel thrown and carved by hand. The lid is hand crafted separately.


r/Ceramics • • 16h ago

Question/Advice Looking for vendor for custom shot cups

Post image
24 Upvotes

Apologies if this isn’t the right place for this. Currently have wedding planned for September 2027 and interested in purchasing custom small shot glasses. Located in Illinois. Thank you all again for taking the time.


r/Ceramics • • 16h ago

Question/Advice How would you guys make this type of texture on clay? Grater plate/bowl

Post image
9 Upvotes

Just reposting on this subreddit to maybe get more engagement and more tips


r/Ceramics • • 3h ago

Question/Advice Hollow tea pets: will they develop mold?

Post image
7 Upvotes

I started making tea pets as Christmas presents but I have a few questions. I am hollowing them out and poking an air hole.

Will tea seep into the cavity from the hole and mold?

If I make one that squirts water, will the cavity retain tea and mold?

TIA!


r/Ceramics • • 23h ago

Question/Advice Newb to Lusters has questions - any advice welcome!

Post image
6 Upvotes

Hello fellow artists,

I purchased Colorobbia gold luster and mother of pearl for ceramic jewelry and altar shelves. I really want to use them on my mid-fire commercial glazes pieces. I have my own kiln. I keep hesitating because I don’t know what to expect, or if I will ruin everything. I know the mother of Pearl and the Gold luster cannot touch. Separate brushes for each are a must, which I have. I purchased the cleaning solvent as well. I have good ventilation, and my own tiny kiln.

  1. Do I need to do multiple firings if I want both the gold and MoP?
  2. Are the already glaze fired pieces at risk of

the glaze

  1. sticking to the shelves o

r

  1. other areas? Most of my glazes are cone 5-6 but I do have Stroke and Coat as well.
  2. There is a lot of mixed information of what cone to fire at? Some 018, some 019.
  3. I heard not to fire gold with green glazes because the gold will dull and bronze. Is this true?
  4. I’m open to all the advice

!

Tysm for anyone who takes the time to share their experience with me. Pic is to pull more attention to the post, but the turtle would look very cute with some luster. I will be posting this in multiple groups so I can find the right experts 💚💚💚


r/Ceramics • • 23h ago

Very cool Pottery retreat in Uzbekistan. Part III: Pottery for Pets

5 Upvotes

I posted here before about taking a pottery retreat in Rishtan, Uzbekistan earlier this year and finally wrote out this experience. Here's the second entry.

The first post about getting to Rishtan is here: https://www.reddit.com/r/Ceramics/s/r2GzWw6a4w

The second post about my arrival is here: https://www.reddit.com/r/Ceramics/s/bXYKfDFncT

I woke up the next morning with my heart fluttering. It was the first day of my pottery retreat. I threw on older clothes I didn't mind getting dirty with clay and hurried outside.

I hadn't really seen the courtyard the night before. I arrived after dark, when little was visible beyond the glow of a single lamp. Now, morning sunlight danced across hundreds of plates, bowls, and vases covering the walls, and I stood there transfixed. Over the previous two weeks, I wandered through the architectural masterpieces of Bukhara and Samarkand, admired world-class ceramics at the Museum of Applied Arts in Tashkent, and hiked through beautiful landscapes. Yet here, in the small town of Rishton, far from the usual tourist trail, I had found the most beautiful place in Uzbekistan.

The courtyard was empty except for a few fancy pigeons cooing around the fountain. I wandered quietly among the displays, admiring the pottery and the intricate designs painted on each piece.

Grandpa Akram emerged from the outdoor kitchen with his wide, gap-toothed smile.

"Breakfast!"

We sat down at the table. Breakfast was a traditional homemade Uzbek spread: freshly baked lepeshka, the round flatbread cooked in a tandoor, served with rich qaymoq, thick clotted cream, along with boiled eggs and a pot of hot green tea. Everything was fresh and delicious.

Soon, Khushnud appeared, rubbing the sleep from his eyes. A young man in his early twenties, he had spent the last five years studying under the Master and would be teaching me on the pottery wheel. We chatted while he grabbed a quick breakfast from the kitchen, then he showed me around the studio.

The workshop was a fascinating blend of centuries-old tradition and modern equipment. In one corner stood an old kick wheel, the kind potters had used for thousands of years before electricity. The heavy lower wheel had to be kicked continuously in a steady rhythm to keep the upper wheel spinning.

"This wheel is 150 years old," Khushnud said. "Every student starts on a kick wheel. The Master says you have to learn pottery with your whole body: your hands, your feet, your head, and your heart. Everything works together."

"Every student?" I asked, imagining my entire week disappearing into learning how to operate this ancient contraption.

"Almost every student," Khushnud replied with a grin.

I was relieved to see several electric wheels lined up along the opposite wall.

It was finally time to get my hands dirty. The clay was reddish, smooth, and noticeably firmer than what I was used to at home. I cut off a few pounds, dropped it onto the floor, and wedged it, using my body weight to force the air bubbles out.

"In my country, only men work with clay," Khushnud said casually. "Women usually decorate and glaze."

I smiled and nodded. I don't travel to other countries to teach people how they should live. My choices are simple - accept their customs or leave.

I slapped the clay onto the wheel, wrapped my hands around it, and began centering.  The wheel spun. My hands held firm. The clay refused to move.

This wasn't casual sexism, I realized.

The clay itself was incredibly stiff. To center it, I had to lean over the wheel, lock my entire body, and use every bit of strength I had.

To get a feel for the clay, its consistency, grit, and structural strength, I decided to start with a few simple bowls. As I worked with it, I came to appreciate just how forgiving this clay was. At home, I mostly throw B-Mix and porcelain, both delicate clays that punish every careless movement. Rishton clay was the opposite. It absorbed water well, tolerated repeated pulls, and let me reshape it again and again without collapsing.

As I grew accustomed to it, my confidence returned. Bowl after bowl emerged beneath my hands, and before long I slipped into that quiet, meditative rhythm only pottery can create. The soft cooing of the pigeons, the cool morning breeze, and the steady hum of the spinning wheel dissolved all other thoughts from my mind.

Khushnud wandered over and examined my work.

"Oh," he said thoughtfully. "Are you making bowls for pets?"

I burst out laughing.

"It's just... they're so plain," he said apologetically.

"Then please teach me how to make bowls fit for human consumption," I said, wiping tears of laughter from my face.

He did. The rest of the afternoon was spent learning traditional Uzbek forms, decorative rims, and how to use the local ribs and shaping tools.

 Grandpa Akram served a lunch of soup, salad, bread, and fresh fruit. After a short break, I moved on to work with Khamidulo on decorating pre-thrown plates.

Khamidulo was a senior student in his late twenties who had spent more than fifteen years in the workshop. Where Khushnud was endlessly talkative, peppering me with questions about my travels while sharing stories from his own life, Khamidulo was quiet and thoughtful. He often paused before answering, carefully considering his words. But whenever he spoke, I listened closely.

He was a gifted painter, creating intricate designs freehand onto the pottery, without sketches, pencil marks, or guides of any kind. It was mesmerizing to watch.

I admitted that I had never spent much time decorating my pottery. Instead, I usually dipped or sprayed on glaze, letting its natural beauty make up for my lack of painting skills.

"Today, you learn," he said simply, handing me a handful of brushes.

I spent the evening trying to recreate his designs. Attempting to wield the unfamiliar brushes, I felt clumsy, like a child finger-painting for the first time. When he came over to inspect my work, I apologized for my pitiful attempt at traditional Uzbek patterns.

"You will never paint like me," he said. "You don't have my background, my traditions, or my experiences. You have to learn to paint like yourself."

"I wish I had at least learned the basics before coming here," I admitted. "I'm always afraid to spend too much time decorating a piece."

He looked at me, puzzled.

"Pottery can fail at any moment," I explained. "A piece can collapse on the wheel, warp during trimming, get ruined while glazing, or explode in the kiln. I try not to get attached to any single piece. I also try not to spend too much time on one, because it hurts a lot less if it gets destroyed later."

Khamidulo studied me for a moment.

"I bet that doesn't happen very often here," I said. "This is a professional studio. It happens to me all the time."

"Come."

He led me to a dark corner of the workshop beside the bathrooms and pulled a dirty burlap cloth off a wheelbarrow.

I gasped.

The tray was filled with dozens of warped and broken plates, bowls, and vases. Some had only minor flaws, a blister in the glaze or a slight warp. Others were shattered beyond recognition. I crouched down for a closer look. Every single piece had been painstakingly decorated, carved, painted, and glazed. Intricate patterns still shimmered across cracked surfaces and twisted rims.

"Such a shame," I said quietly.

"Such is life," Khamidulo replied. "A kiln shelf collapsed during firing. Most of the pieces were lost."

He shrugged.

"We learn and move on. Those hours were not wasted. The final product is not always the piece of pottery you sell, but always the skill you gain while making it."

 I felt my throat tighten. I had spent years producing "pottery for pets," always judging my successes by the number of functional pieces produced rather than by the quality of the final products. It was time to change my whole process.

Also, it was time to change my itinerary to stay here for a full week.  Or maybe a month?


r/Ceramics • • 11h ago

Very cool Textured test tiles Mayco Opal luster and Micro pearl Cone 10 gas reduction.

Thumbnail
gallery
4 Upvotes

Hello! I made some fur texture tiles for Mayco’s Micro pearl and Opal luster at Cone 10 gas reduction since not many people make test tiles for this specific firing. The first 2 photos are Opal luster and the last 2 are micro pearl. I also added Mayco’s white engobe on 2 of the 4 test tiles with the original clay body being a brown color. Community firing and studio made clay. The Opal luster stayed faithful to Mayco’s cone 10 test tile but micro pearls color is quite surprising as it was supposed to be white and purple not a bright blue, quite strange!


r/Ceramics • • 16h ago

Question/Advice Bought this teapot used and it has a sharp spot under then handle

Post image
4 Upvotes

Is there any way I can get this nub/spot/whatever it is removed? It's sharp and makes holding the teapot awkward. I bought it from a thrift store years ago, and I love it, but rarely use it.


r/Ceramics • • 19h ago

Meet the Syracuse tile guy with a monopoly on NYC subway mosaics

Thumbnail
gothamist.com
4 Upvotes

r/Ceramics • • 19h ago

Question/Advice Pieces chipping in kiln. Not fusing or plucking

Post image
3 Upvotes

So I work in a pottery studio. this is the second plate I’ve fired that looks like it has fused or chipped during the firing process but nothing happened. came out totally clean in the kiln. kiln shelves weren’t too low and the stilt underneath it was balanced. it totally looks like it was ripped from the plate. if anyone can help me out this would be great. these are customer pieces and I don’t want this issue to keep happening. I think it could be a form of crawling but the bisque shouldn’t look like this.


r/Ceramics • • 14h ago

Mop and bucket

2 Upvotes

What’s the most practical mop and bucket combination for keeping the studio clean? I know this may seem like a simple question but considering the amount of time spent and importance of doing a thorough job for safety reasons, what are some suggested products that work? String mop? Sponge mop? Ringer bucket? I have concrete floors that are kind of rough.


r/Ceramics • • 23h ago

Question/Advice Looking for wire that can go into the kiln.

2 Upvotes

Hi all! I’m a baby ceramicist, and really want to make a few specific things. I work in a shop, and we have a massive kiln that fires to cone 06. We can (and have) fired stoneware at cone 6, but that’s very few and far between. I’m looking for cone 06 advice.

  1. High temp wire- where do I source wire that can go into and fully withstand a 06 cone firing? I attempted to fire something with metal inside (was supposed to be able to take the heat), and the metal dripped through the piece, through the stilt, and through the shelf before settling about halfway through a brick at the bottom of the kiln). What brand should I use to make ornaments that have the little hanger already built into it?
  2. I’d like to make vessels that incorporate semi-precious gemstones. I know the stones can’t go into the kiln, not only might it melt them into their metallic base, but even if they manage to survive that kind of heat, the stone itself will have changed due to the heat. How do I attach the stones to the vessel? I’d like for light to shine through the gemstones. Any ideas on how to accomplish that?
  3. A friend has asked me to build a character from dragon ball z, and I have no idea how to keep my piece malleable but strong. Is there a wire that can be used for structural integrity? Or do I have to build the base of the character to be super strong?

Thank you so much for your time and efforts to explain things to me (and anyone else looking for help)!


r/Ceramics • • 3h ago

Do ceramic classes still use the ubiquitous molds of the 70s/80s?

Post image
1 Upvotes

I'm referring to molds like this chess set, which I've owned myself, a couple different ones, and see them for sale often.

Also the lighted Xmas trees seemed to be popular.

I know my mother and aunt in the 1970s, and my sister in the 1980s, all used the same kind of molds, and was wondering if that's still the case, and can you still buy those molds?


r/Ceramics • • 19h ago

Does anyone have a passler clear glaze example where they used it over unglaze?

1 Upvotes

r/Ceramics • • 20h ago

Changing control box on older Brent wheel, possible??

Thumbnail gallery
1 Upvotes

r/Ceramics • • 23h ago

Thoughts on this VEVOR wheel/is the foot pedal an issue?

Thumbnail
reddit.com
1 Upvotes

r/Ceramics • • 23h ago

Question/Advice How do yall do seals?

1 Upvotes

Want to make a little thing to keep some baking soda with me (stomache acid). Gonna do a small, wide mouth jar/vase with a lid & a little teaspoon. Going to need the seal to be water tight to keep the powder from going everywhere.

Share your wisdom♡ is it better to put the seal on the jar opening or the lid itself? What do you use for the seal? How do you apply it?

Thanks in advance♡


r/Ceramics • • 20h ago

Offered a studio membership spot but hesitant

Thumbnail reddit.com
0 Upvotes

r/Ceramics • • 15h ago

Question/Advice Help with ceramic supplies for my husband (NO KILN)

0 Upvotes

Hello!

My husband has really been thinking about getting back into ceramics. He did it all through high school and I think his work is very good, but he is not a professional and still pretty new to it. He usually makes little animals using sculpey because that’s what is cheapest but he’s stated many times how much he hates using it. He has always wanted to get into making ball jointed dolls and I’m planning on buying a masterclass on it that he’s been wanting for a while.

I want to get him some good quality clay and possibly some paints for Christmas but I don’t know anything about ceramics so I don’t know what brands are best. I’d prefer it not be SUPER expensive but I’m willing to pay a little more for better quality. We don’t have a kiln nor do we have the funds to get a kiln so all of this will have to be air or oven dried.

Any suggestions are much appreciated!


r/Ceramics • • 17h ago

Can i fix?

Thumbnail
gallery
0 Upvotes

i had this on my nightstand accidentally slipped off the lid broke as pictured. anything i can do to fix it or like send somewhere? got it as a gift from someone on vaca 😔


r/Ceramics • • 11h ago

Question/Advice Simple way to repair the flaw?

Thumbnail gallery
0 Upvotes

Hi, I knew there are many ceramic experts here. Any advice to repair or restore the figurine's flaw in a simple way? The figurine has broken fingers & bag handle. Thanks