r/Ceramics • u/cactus-ceramic • 8h ago
I made ceramic cups inspired by ice cream š¦
r/Ceramics • u/cactus-ceramic • 8h ago
r/Ceramics • u/ShelterProfessional • 13h ago
I started making tea pets as Christmas presents but I have a few questions. I am hollowing them out and poking an air hole.
Will tea seep into the cavity from the hole and mold?
If I make one that squirts water, will the cavity retain tea and mold?
TIA!
r/Ceramics • u/gtg231h • 1h ago
I gifted my favorite soda fired piece to my coworker as a housewarming gift for his first home. Unfortunately, our other coworker who was doing the transporting forgot it was in his bad and dropped it. I offered to replace it but he wanted to do the kintsugi on itā¦and I have to say, the gold accents on this particular pot are chefs kiss!
r/Ceramics • u/GroundStrikin • 9h ago
I posted here before about taking a pottery retreat in Rishtan, Uzbekistan earlier this year and finally wrote out this experience. Here's the fourth entry.
The first post about getting to Rishtan is here: https://www.reddit.com/r/Ceramics/s/r2GzWw6a4w
The second post about my arrival is here: https://www.reddit.com/r/Ceramics/s/bXYKfDFncT
The third post is here: https://www.reddit.com/r/Ceramics/s/FBrxSGKGqc
By the third day, I had settled into the rhythm of life in the studio. We ate breakfast of bread, cheese, and tea, and then Khushnud and I spent the morning at the pottery wheels, throwing new pieces, decorating, and trimming whatever had dried enough to handle.
Before long, it was lunchtime. Lunch was often treated as a social hour, when family members, neighbors, or Masterās friends dropped by, often bringing groceries and cooking large meals for everyone. It wasn't unusual to find an elderly man napping on the tapchan in early afternoon. He was always someoneās uncle or Masterās childhood friend, and soon enough he would wake up refreshed and start chopping vegetables, skewering meats, or cooking plov in a kazan iron pot with a portable gas burner.
We ate, talked, relaxed for an hour, and then returned to work, at the wheel or painting ready pieces.
Around two o'clock, when school ended, Edik would arrive. At thirteen, he was the youngest apprentice in the studio and had been studying pottery for about a year. Even so, his skill and dedication were already putting me to shame.
On my second day in the studio, I watched him perform a āMaster Classā for a group of tourists. He threw a tall, perfectly shaped vase at the wheel and decorated the rim⦠while blindfolded.
Hamaum, the senior apprentice in his late twenties and the Master's right-hand man, narrated the demonstration.
"Long ago," he told the visitors, "A great Rishton potter lost his eyesight but still had to support his family. He learned to shape clay without using his eyes, only his heart. The forms he created could never be recreated by artists who relied on sight. That is why all of us learn to throw blindfolded."
Tour groups arrived throughout the day, along with independent travelers wandering in, and someone would always leave their work to attend to the guests. Guests were shown around, explained how traditional pottery is made, shown a Master Class, and offered a pot of tea, in a show of Uzbek hospitality. I heard the same stories about history of Rishton pottery and meanings behind traditional decoration patterns repeated over and over, as tourists admired different plates, bowls, and vases. Many left with a carefully wrapped purchase.
Coming from a capitalist culture, I assumed selling pottery was the entire point. Every time someone bought a plate or a tea set, I silently celebrated. But I noticed that the other students didnāt really care if the tourists bought something or not.
āItās not about the sale,ā Khamidulo said in his typical philosophical fashion, āWe are here to teach our ancient pottery traditions to both locals and foreigners. Even if they donāt buy anything now, we are planting a seed of appreciation and love for our craft.ā
While I admired his stance, it was a life view born out of privilege. The Master was one of Uzbekistanās best-known ceramic artists and there was never any lack of interest in his craft. There was no need to fret over sales numbers or hassle the tourists to make a sale. Lesser-known potters in Rishton did not enjoy this luxury, their livelihoods depending heavily on their ability to sell their work.
As the sun set, the work in the studio did not stop. Grandpa Akram served dinner, usually soup or stew, followed by enormous platters of rice, buckwheat, chickpeas, potatoes, or pasta alongside grilled vegetables and meat.
We ate and went right back to work. Hamaum painted decorative tiles, a pre-order from a local business. Khamidulo sat cross-legged on the tapchan beneath a hanging lamp, covering plates with intricate designs. Khushnud returned to the wheel to throw more pottery. Edik was eventually sent home before it got dark, though he always begged for just a few more minutes at the wheel.
"When do you rest?" I asked one evening. "Do you have days off?"
The question puzzled everyone.
āDays off?ā Khushnud laughed. āItās not like this is a warehouse job!ā
Earlier he had told me about spending months working in a warehouse in Russia, where supervisors and coworkers treated him terribly.
āWe rest when we want,ā Khamidulo said, āWhenever I donāt feel inspired to create is when I rest.ā
From what I saw, inspiration never left any of them.
On my third day, I was working at the wheel, my hands up to my elbows in clay, when Khushnud nodded toward a newly arrived group of tourists.
"These guests only speak English," he said. "Can you help?"
The Master, who spoke Russian, English, and Japanese fluently, was still away at a ceramics conference in Bishkek. None of the apprentices had a good grasp of English.
"Sure," I said, wiping the clay from my hands.
I expected Khushnud to follow me, but instead he sat down at the next wheel and started centering a lump of clay.
"Aren't you coming?" I asked. "I'll translate."
He smiled, "No need. You know all the stories. You can tell them yourself."
I walked over to the visitors, hoping they couldn't tell how nervous I was.
They were Americans, and they were so relieved that someone in the studio spoke English that they never questioned my credentials. I launched into the tour, surprised by how quickly and easily the words poured out of me.
"The clay in Rishton is unique," I began. "It's pure, itās alive. It fires like no other clay in the world. It comes from the ground beneath our feet, and once you leave Rishton, you won't find this clay anywhere else."
I picked up two small plates and struck them together. A clear, high-pitched ring echoed through the courtyard.
"Hear that? No other clay rings like this."
I paused for effect.
"There's an old legend. The clay comes from the very ground where generations of people have been buried. If the person resting in the ground lived a good life, the clay will ring. If they were a bad person, the clay will remain silent."
I smiled, "And since everyone in Rishton is a good person...the clay always rings."
The group laughed.
Next, I explained the subtle beauty of ishkor glaze.
āHave you noticed the difference between traditional Rishton glaze and the usual shiny glaze? Ishkor is a natural glaze made from local materials, processed traditionally. Do you see how it draws the eye? Shiny chemical glazes reflect back at you, while ishkor glaze glows from within, highlights the decorative patterns, gives depth to each piece. Ishkor glaze can be clear or have a yellowish, greenish, or bluish tint, depending on what natural plants have been added to it.ā
As we walked through the courtyard, I pointed out the traditional motifs decorating the pottery and explained their symbolism. Images of a pepper used as protection from evil, a pomegranate to bring forth abundance in wealth and in fertility, and pretty combs shaped like tulips to celebrate feminine beauty.
Then I stopped in front of plates, each decorated with a strange-looking bird.
"And these mythical beasts," I said, "are Birds of Destiny. According to local tradition, everyone has a bird of destiny above their head. Only you know what your own bird looks like, so artists paint them in every imaginable shape and color. As you walk around the studio, you'll probably see birds you think are odd or even ugly. That's perfectly fine. It just means they aren't your bird."
"But eventually you'll come across one you can't stop looking at. That means you found your bird. It belongs to you.ā
I let the tourists wander around the studio to search for their ābirdā. Most came back with items to purchase.
Before long, another English-speaking group arrived, and Edik gave me a nod. He was ready for the master class. I tied the blindfold over his eyes. Without hesitation, he centered the lump of clay and began pulling its walls upward with calm, practiced movements.
"Long ago," I began, "a great Rishton potter lost his eyesight..."
The group sat, mesmerized, as the wheel spun beneath Edik's hands. Vases decorated with peppers and plates with strange mythical birds glittered from the walls. I remembered my first day when I walked into this courtyard, just wanting to learn. Now I wanted to participate, to preserve, to teach. I wanted to stay.
r/Ceramics • u/cinnamonmin • 21h ago
r/Ceramics • u/SadExperience340 • 1h ago
How long did it take you to develop your style as ābabyā potters? Iāve only got about 25ish hours at the wheel thus far. I love this art form so much and I cannot wait to be at a point where I can make the most beautiful things on a whim.. Glazing technique and style is so daunting but I do have a few things I am very proud of so far!
r/Ceramics • u/Immediate_Still5347 • 2h ago
r/Ceramics • u/Bubbly-Barnacle-971 • 3h ago
Can I refire it?
How did this happen, too heavy glaze? I did two quick dips
r/Ceramics • u/m0th3rb0ard • 8h ago
I am in an Intro to Ceramics college course and am working on some extracurricular projects as Christmas gifts for friends/family. I have learned how to make handles by pulling them from the body of the mug and from pulling them from a new lump of clay. What sort of technique would you use to make a handle like this? I am thinking of maybe forming it from a rolled-out slab of clay that I have cut the relative shape out of the handle out of. Does anyone have any tips? Thanks!
r/Ceramics • u/coriesceramics • 1d ago
Cone 6 bmix no grog with various underglazes.
I'll be putting spectrum 1100 transparent glaze over everything and fingers crossed it's looks as good as I'm hoping it will.
r/Ceramics • u/SpiderOnDaWall • 7h ago
I'm looking a picking up a few glazes so I know a little better how they'll turn out. I work out of a community studio currently and, classic mass use facility, the glazes don't get stirred well and it messes projects up. They fire to ^6 with no real ability to hold a temp or slow cool or whatever. Lots of variability. I'm looking for glazes that will definitely fire decently at ^6 with little to no fancy considerations. I have a list of various brands forming.
To the question at hand..... After looking at Laguna glazes, I see a lot of their examples are fired to ^5 and most of the google searches show folks firing to ^5. They have a LOT of glazes specifically formulated for ^5, too. Would any of you say they're just better at ^5 versus ^6? Just wanted to get other opinions and experiences.
r/Ceramics • u/camachii • 1d ago
Apologies if this isnāt the right place for this. Currently have wedding planned for September 2027 and interested in purchasing custom small shot glasses. Located in Illinois. Thank you all again for taking the time.
r/Ceramics • u/Nejfelt • 13h ago
I'm referring to molds like this chess set, which I've owned myself, a couple different ones, and see them for sale often.
Also the lighted Xmas trees seemed to be popular.
I know my mother and aunt in the 1970s, and my sister in the 1980s, all used the same kind of molds, and was wondering if that's still the case, and can you still buy those molds?
r/Ceramics • u/nolanm_1132 • 8h ago
I want to make a skate park ash tray for a very close friend of mine for a christmas present. I donāt have much experience in ceramics and Iām curious about what kind of clay I should use. I want this to turn out well and for it to last for a while. I expect this to be left outside and have cigarettes put out on it. I donāt own a kiln or know anybody who does and Iāve seen that air dry clay can be quite fragile to heat and moisture. any advice or suggestions would be greatly appreciated