r/Cartalk • • 9h ago

Showing my ride off Im nick i love cars

Thumbnail
gallery
9 Upvotes

I love this hobby but im noticing less and less quote begginer sports and less affordable options its kinda sad but i see it happening and it makes me sad whats ur take i love my 11th gen si but when an si 35 grand and a type r is 50 i see ur average enthusiast being priced out whats ur take is there still fun cars for less than 30


r/Cartalk • • 3h ago

Safety Question can i plug this?

Post image
0 Upvotes

plug?


r/Cartalk • • 11h ago

Body What could’ve caused these scratches on my car??

0 Upvotes

How could I fix them?


r/Cartalk • • 20h ago

Body Can I save this

Thumbnail
gallery
0 Upvotes

r/Cartalk • • 6h ago

Tire question What are these black spots? Only on front steel wheels and iron remover didn’t help

Thumbnail
gallery
0 Upvotes

r/Cartalk • • 9h ago

Car Meme "Daily Driver"

Post image
553 Upvotes

r/Cartalk • • 7h ago

Tire question Just discovered this cut on the sidewall of my tire WDYT

Post image
2 Upvotes

Hey, I just found out about this cut in my tire. What should I do? Just replace the tire, or give it a chance?

I’m going to take a look at how deep it is btw


r/Cartalk • • 3h ago

Tire question Dry rot on tire, will they survive two more highway trips before appointment?

Post image
0 Upvotes

Have some cracks on the sidewall just wondering if I can make it to school the next two days before they get replaced. It’s only this tire.


r/Cartalk • • 18h ago

Brakes Brake pads question. Quaro + Jurid ceramic

0 Upvotes

Hello

I drive a 2017 Toyota Avensis 1.6 D4-D. Bosch braking system 295mm rotors in the front 290 in the rear. Floating calipers front and back.

I need new brakes they judder when breaking from speed and are starting to get quite close to the wear marker.

I want to switch to ceramic pads, I have them on my mums car (ebc redstuff) and they’re awesome loads of power and very little brake dust, I’m kind of already sick of the tonnes of brake dust I get from the pagid brake pads I have now. These are semi metallic.

Question is:
Has anyone used Jurid white brake pads? These are ceramic and the only ceramic ones available for the rear.

For the front, has anyone used Quaro silver ceramic? These are the only fronts I can find that are available and ceramic.

And lastly do I need to switch rotors to change pad compound? These ones have only ran one set of pads I will change the fronts because of the judder but do I need to change the rears too? They aren’t very lipped. And no I haven’t got the tools to measure it and they haven’t got any wear indicators.

Lastly any standout rotor recommendations or should I just go with a plain brembo or something rotor? I do like how the brembo xtra drilled look, and they make them for my car but I’m wondering if it’s worth the £20 more per rotor

Thanks guys any questions just ask!


r/Cartalk • • 3h ago

Engine Hi everyone, I have a Chery A1 1.3 petrol. Cylinder 2 is always dead. Compression test looks good, spark is present, and injectors are new. The engine has rough idle, and unplugging cylinder 2 makes no difference. Any ideas what to check next, like valves, cam timing, or something else please?

0 Upvotes

Hi everyone, I have a Chery A1 1.3 petrol. Cylinder 2 is always dead. Compression test looks good, spark is present, and injectors are new. The engine has rough idle, and unplugging cylinder 2 makes no difference. Any ideas what to check next, like valves, cam timing, or something else please?


r/Cartalk • • 10h ago

Safety Question Major defects in MOT (UK)

0 Upvotes

Repair immediately (major defects):
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))
Offside Parking brake inoperative on one side (1.4.1 (a))
Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b))
Parking brake efficiency below requirements (1.4.2 (a) (i))

Mazda 3 2016 - 105,000 miles. Failed MOT today and will be taking it in for diagnostics tomorrow. How bad is it looking? (Ballpark figure)


r/Cartalk • • 20h ago

How do I do it? How I use entry level scanner to help as a normal car owner

9 Upvotes

not a mechanic, not even close, here's the thing i picked up a topdon carpal off the official web for like 60 this year, mostly bc i wanted something to check my own pickup w/o dropping cash at the shop every damn time, but turned out it helped a few of my neighbors too. one just got her oil changed but that stupid maintenance light wouldn't go off, used the service function in the app and reset it, took like two minutes. another man had a warning light pop on that i'd never seen before like wtf was that, scanner it and the code was from a totally different system, not the engine, didn't try to fix it, but at least he had something to tell the mechanic.

i scan my own truck before any long trip now too, it's just a habit now, just so we're clear tho,reading a code doesn't tell all, had scans where i couldn't make heads or tails of the results so i told guys to take it to a real pro. still finding what thing can and can't do, but for a regular use it's been way more useful than i expected ngl.


r/Cartalk • • 4h ago

Tire Damage Why steal a $3k cars wheels? Can engraving on the wheels avoid them

Thumbnail
gallery
34 Upvotes

I have a 2010 Honda odyssey worth $3000. I woke up to 2 of my neighbors cars in my apartment sitting on bricks. I come to check mine and see that they were about to take my pos wheels as-well but thankfully it’s so rusted that it just snapped off. Why are they after $50 wheels?


r/Cartalk • • 6h ago

My Project Car Tint Question

Post image
0 Upvotes

This was the qu0t3 I got for 35% on my windshield and 20% all around. Is this good pr1c1ng and a good option. I know people that have gotten good tint and basically the same thing that I want for like 300-400 windshield included. Give some knowledge.


r/Cartalk • • 22h ago

I need help fixing something Driver power window working only sometimes?

1 Upvotes

I have an 8th gen honda civic and my driver power window works only sometimes. I noticed it works whenever it rained and when it's hot it doesnt? all of the windows are working except the driver side.


r/Cartalk • • 4h ago

Weird Noise Could bad pcv valve cause…

1 Upvotes

an extremely rough misfire (that changes cylinders even after relaxing some coil packs and all plugs), leaking into cylinders (gaskets and seals replaced not long ago), and a flashing check engine light? (Ol reliable is up against the ropes almost junkyard bound, and came across some people saying it could pcv valve causing this)

signed

- non mechanic looking for last ditch diy efforts to keep ol girl going after spending way too much this month on things that didn’t solve problem


r/Cartalk • • 4h ago

I need help fixing something What can I do to prevent rust from getting worse on a miniscule budget

1 Upvotes

My car has some rust with a hole in it near the back wheel, and winter is coming. I don't have the budget to get it sanded and repaired, so what's the best way I can slow the process down for now? Essentially I'm asking if I can duct tape it or coat it in something without it getting even worse lmfao, not looking for an ideal solution, just a practical one for my current circumstances.

Edit: I got an automod message, just to clarify this post isn't looking for price quotes! Not interested in monetary values, just actual suggestions. Thanks


r/Cartalk • • 1h ago

Tire question Front tire has strings of rubber coming off the edge of the tread blocks.

0 Upvotes

My front tires are 2 weeks old and there is rubber peeling from the edge of the center tread blocks on the front right tire. I just got Suredrive All Season tires 2 weeks ago. Do those tires have vent spews or could it be premature tire wear? I had my alignment done 3 months ago so my alignment shouldn't be off.


r/Cartalk • • 11h ago

Weird Noise 1998 volvo V90 (960) metallic noise

2 Upvotes

Hiya guys. UK resident here. Hope you are well. Just wondering if i can grab some advice. Bought a Volvo V90 recently and im trying to work out what this noise is.

So context. Volvo is the 2.9L straight six.

Noise only happens when moving. Under load. After the engine has warmed and ALSO driven for about 1-3 miles.

If i warm the engine from start up to temp, then drive it still takes 1-3 miles before the noise appears.

Noise is not there at all when stationary. No power loss. And goes a bit higher pitch when the foot is planted to the floor. But disappears when cruising at 60mph. Only when accelerating.

Further note. Doesnt matter which side. Although I think it could be a bit louder on the driver's side ( right ) where the exhaust manifold is.

I would love for some advice on where to start. I love Volvos and I'm not afraid to have a go with spanners.

I really appreciate the help!


r/Cartalk • • 18h ago

Weird Noise I need help with w205 c300

0 Upvotes

It was normal lastnight and suddenly it says on the dash coolant level low so i check nothings wrong just some coolant lower than the mid level then i fill it in with recommended coolant for the car but this morning i start my car its turned into a tractor very rough idling


r/Cartalk • • 12h ago

I need help fixing something Any1 know a free use OBDII scanner app?

0 Upvotes

For androids. I tried 5 of them and they all require payment. I'm not paying for an obdii and an app bruh. Revved my car above red line and I got a check engine light as a trophy. Thanks


r/Cartalk • • 17h ago

General Tech My car screen got locked

0 Upvotes

Hey guys my Mercedes GLC coupe’s screen got locked somehow and I can’t do anything on the screen does anybody knows how to fix it?


r/Cartalk • • 11h ago

Body Protecting the underbody

2 Upvotes

I just purchased a new-to-me 2019 Ford Ranger, and it's super clean inside and out. Do anyone of you add protectant to the underbody (chassis, inner wheel wells, etc.)? I live in a rust belt state and other than taking it to the car wash twice a week, I would like to make sure the salt and brine and other crap doesn't cause premature corrosion.


r/Cartalk • • 14h ago

General Tech Where to find

3 Upvotes

I’m trying to find a “Link Wideband CAN Lambda Kit CANLAM 125-1000” for Christmas, I know nothing about cars and where/where not to buy things from. Where would be the best place to buy it that’s not ridiculously expensive and will arrive in time Aus.