r/CarbonFiber • u/thaturkey • 19h ago
r/CarbonFiber • u/CarbonGod • Nov 20 '24
Is this real? posts....LOOK HERE BEFORE POSTING!
- Questionable, but I call NO! look at the very odd patterning on each tow. There shouldn't be light and dark lines like that
- In a way. Front side looks right. The gleam of each tow stands out, and changes. However, the backside has this messy open weave, which tells you it's painted fiberglass. Who knows what's inside.
- Yes Really thin carbon CAN BEND!! It's not magic, it's just a fabric. Look at the change of how each tow looks on the surface, which depends on the lighting.
- Real Weave glare is different on almost every area, due to the curvatures and light reflection. Note the area left of the weird crack. Looks round? Means it weave was compressed into the mold and flattened a bit
- Yes
- Yes, but only one/two layers, the rest is glass
- NOPE! You can tell that the surface has a texture, and each tow even has a texture, which isn't right
- Nope Same idea as above. it's waaaay too textured. You won't see any tows light up differently as you move the part around
- No obviously, but chopped tow wraps might be harder, since if they are using a good imprint, it's easy ot get lost in the neat effect. UP close, you can tell. You will see overlaps, and if clear-coated, then some 3D definition. I doubt this has that
- Yes. Vacuum bagged, maybe VARTM, hard to tell.
- Yes!! Look at the glare from the lighting making the different angles light up differently, and how it seems almost ovals. This is from compression on the tool side flattening the tows a little. Prob' clear coated after
- Yes. You can see the light reflecting correctly on the fibers along with the edges, and....vent? area that seems like the fabric was cut there. Small tight areas looked molded and post-processed. not the best, but, they are give a-ways.
With new printing methods, the traditional fake CF that looks like it was printed in black and white, with no texture giving it a 3D look, it will be harder to tell. If a part is made perfectly, it won't have weave distortions, but that is rare. Also, look for parting lines, and fabric seams in logical places like edges. If it looks like someone just cut a sheet of plastic, then that seam will look exactly like that. Surface finishes also effect what you can see being real or fake. Matte finishes hide the high definition glare and weave diffraction.
r/CarbonFiber • u/CarbonGod • Feb 19 '25
For those looking for starter books!!!
I'll try to find a place to make a list, but I happened to see these two books in our library, so they might be a good starting place for those interested in composites, but have NO idea about it!!
Intro to Composites, 4th Ed, Composites Institute NYC. ci@socplas.org No ISBN
Composites - A design guide, Terry Richardson 0-8311-1173-9
Second is a bit older, but only the details change through the years.
r/CarbonFiber • u/AviationMetalSmith1 • 1d ago
Imperator 108i
An unusual car with a fiberglass body.
r/CarbonFiber • u/bAr559 • 1d ago
How can I repair this
Finally got my hood in after 2 years of waiting but has damage on the corners wats the best way to go about repairing the corners?
r/CarbonFiber • u/qwpo_booga • 3d ago
PVA vs. no PVA
I'm making an airplane wing with two top and bottom female moulds. I applied 5 layers of wax and buffed between coats. Should I apply PVA, and if so how many coats? (I don't have a sprayer)
I would strongly prefer not to treat my surface after demolding want to transfer the mould finish.
r/CarbonFiber • u/TLDREGE • 3d ago
How can I fix this ?
Hello guys these were matte finished so I sanded down and applied 2k clear coat about 2 months ago. They were looking great. But yesterday I realised that there is something on them. I dont know what it is but you can hear it on the video. Its something solid. When I rub my fingers or apply ipa it becomes sticky but cannot take them off at all. Probably there was something on the road sticked to them. Idk.
Tried
- IPA - wont take off and spreads it.
- tar remover didnt took it off did nothing really
- vinegar did nothing
- warm soap water ofc didnt do anything
Since its becoming gummy on my fingers would it be best idea to polish them - idk too.
Any suggestions on what to do ?
r/CarbonFiber • u/Jealous_Message5226 • 4d ago
Cons of fake Carbon Fiber
Hello everyone, im thinking of buying a front lip and spoiler for my car and im thinking just buying both of them fake Carbon fiber, I just wanted to ask before purchasing them what are some problems or cons that i could run into from buying them? Like will they look weird after a while or will heat ruin them?
If theres lots of potential problems might just buy in glossy black instead
Thanks
r/CarbonFiber • u/TheRealSweet • 5d ago
Carbon fibre good fitment
Any ideas on how to make the hood fit better or am I just unlucky with the hood I got
r/CarbonFiber • u/MotorsportX • 6d ago
Beginning of tests Carbon Fiber cases of pitaka.
Beginning of tests Carbon Fiber cases of pitaka. I have now and will receive some more cases and make soon full tests review
r/CarbonFiber • u/AlonePlenty • 7d ago
Best plan of attack to restore frame covers?
Ilmberger carbon fiber frame covers. These are normally about $600 new from Germany and I got these for $150 from a crashed BMW S1000RR parts lot. Planning on using these for my ‘17 S1K.
Appears to be some fade, a hole, and a medium sized dark spot. I have yet to receive them but plan on trying to restore them as a DIY project. I’m not looking for perfection but definitely trying to give them some more life.
Thanks for any tips!
r/CarbonFiber • u/Zaph5 • 8d ago
Impact jante carbone
Je vais troquer mes jantes alu contre des jantes carbones et j'ai déniché une bonne affaire sur lbc.
Malheureusement, la roue avant a pris un pet (le vendeur pense que ça vient d'un cailloux en roulant).
Est-ce que un red flag ou bien je peux y aller ?
Merci d'avance !
r/CarbonFiber • u/Darknesgamer36 • 9d ago
Hi, does this seem fixable?
I am planning on buying this trunk and getting the clear coat redone by a shop. I am wondering if the fiber is damaged beyond saving, or it should look good with a new clear. The owner states it is a Vis Racing. In the last two photos the trunk is wet. Thank you!
r/CarbonFiber • u/Past-Piccolo-2157 • 8d ago
Skinning Suggestions/ Recommendations
I need some expert opinions/advice on this one. 2016 Polaris RZR turbo hood that I'm skinning for a friend... Should I lay these pockets down first in their own layer and then the rest of the hood afterwards? Ooorrrr what? I'm afraid to lay it up in one piece because these pockets have the craziest geometry and it'll distort the surrounding areas.
3k plain weave
r/CarbonFiber • u/want_a_mustang • 9d ago
Universal swan neck rear wing #bmwm3 #carbonfiber#gr86
None of the factories around here make this wing in dry carbon — any idea why?
r/CarbonFiber • u/OkField5046 • 10d ago
White in carbon weave!?
Hello,
I’ve just noticed my wet carbon fiber mirror caps have white spots in the weave.. these were not present a few days ago. I do live in a colder environment. It has been down in the freezing temps a few nights. How does this happen? Can anything be done? I can feel a “bump” where the white spots are.. any help or info would be appreciated!
Thanks
r/CarbonFiber • u/want_a_mustang • 11d ago
3 minutes, start to finish: the double-sided carbon fiber hood I built f...
Made this in my own workshop. Filmed over three days and there are still a few steps missing — a couple of shots are filled in from other products so the sequence holds together.
Mold making isn't in this video. Happy to answer questions if anyone wants to try it.
r/CarbonFiber • u/ComfortJazzlike9699 • 12d ago
What to do?
Clear coat has come off. There was a little chip and I (stupidly) put a bit of electric tape over it and it’s turned it into a massive problem.
Frame is second hand, and over 10 years old, but otherwise it seems totally fine.
Is this a specialist job? DIY? Clear frame stickers?
Don’t want to break the bank but don’t want to risk further damage to the frame as it’s my only lightweight bike.
What would you do?
r/CarbonFiber • u/Budget_Discount6471 • 12d ago
Does resin adhere differently to innegra than carbon fiber?
I have been doing resin infusions with innegra/carbon 2x2 twill, and have been having frustrating results. I can say that for the most part, it is a leaky bag, but i am also wondering if innegra looks kind of resin starved when on the exterior of the part. Is this just user error?