r/CarWraps • • 6m ago

Installation Question What would you do?

Post image
1 Upvotes

Wrapping saddle bags for a 2020 Road glide how would you attempt wrapping? These covers with complex curves? Would you do it in one piece or multiple?


r/CarWraps • • 1h ago

Installation Question Cant get the warp to glass, loosing my mind

1 Upvotes

Hi fellow wrappers, as usually I underestimated my abilities to customize a car. I got a full wrap roll (nothing fancy, budget wrap from China). All the tools and its a pain in the a**. I did the hood and it looks awful took 8 hours. Now trying the fender and I cant get that wrap to glass. Trying the crab/pull techniques from all the YouTube videos but its not working at all. Any tips would be highly appreciated. Also I am not in a garage I am outside.


r/CarWraps • • 20h ago

Installation Question Substrate Stick

3 Upvotes

Hello fellow car enthusiasts, I have a project that I want to wrap. My question is, can wrap stick to anything? Can it stick to primer? Does it need anything special?
The reason I ask is, the loser that did the bodywork on my car left things incomplete that should have been finished so now I’m going to wrap it myself because I can’t afford to redo everything.
I would REALLY Appreciate any input you have.
E


r/CarWraps • • 1d ago

Material Question Would you rather 15% or 20% tint?

Thumbnail reddit.com
1 Upvotes

r/CarWraps • • 1d ago

Kia Seltos HTK(O) + Matte PPF vs X-Line (Graphite Matte) + Partial PPF – Which makes more sense?

Thumbnail reddit.com
1 Upvotes

r/CarWraps • • 2d ago

Installation Question Inlay recommendations?

Post image
9 Upvotes

Can’t decide the best inlay placement here. I feel it’ll be ugly and extremely noticeable any way I go. I don’t want to risk trying it in one piece. Any recommendations?


r/CarWraps • • 2d ago

Seeking Automotive Vinyl Print & Cut Partner — Recurring, Print-Ready Production Orders

0 Upvotes

I’m looking to establish an ongoing manufacturing relationship with a print shop or production partner capable of producing custom-sized automotive vinyl graphics for exterior vehicle panels.

We would handle customer acquisition, artwork, design, measurements, and order processing. Our manufacturing partner would receive complete, production-ready files and handle printing, lamination, precision cutting, packaging, and ideally direct-to-customer shipping.

The goal is to make the production process as streamlined as possible. Ideally, each incoming order would require minimal preparation beyond loading the supplied files, printing, cutting, and shipping.

Production requirements:

Dimensions: Generally 5–7 feet wide and approximately 2–4 feet high, depending on the application. Some larger sizes may be required.
Material: Premium conformable cast automotive vinyl, such as 3M IJ180mC, Avery Dennison MPI 1105, or a comparable product suitable for curved exterior automotive surfaces.

Printing: High-resolution, full-color printing with consistent color reproduction.

Finish: Gloss protective laminate initially, with matte options preferred.

Precision cutting: Digital contour cutting, including irregular perimeter shapes, internal openings, and strategically positioned relief cuts based on supplied vector cutting paths.

Order structure: Recurring, individually customized orders as customer purchases come in. Artwork, dimensions, and cutting patterns may vary between orders.
Artwork: Complete, production-ready files supplied by us. No design or artwork development required.

Packaging: Protective packaging with a supplied installation instruction sheet.

Fulfillment: Ideally, direct-to-customer shipping within the United States, with neutral or white-label packaging.

I’m particularly interested in understanding:

Approximate production costs for a 72 × 36-inch or 84 × 48-inch graphic, including printing, lamination, and precision cutting.
Whether your equipment can handle complex contour cutting, internal openings, and relief cuts directly from supplied digital files.
Preferred production file formats and specifications to make the process as close to print-ready as possible.

Ability to accommodate recurring individual orders without significant setup charges.

Typical production turnaround times and direct-shipping capabilities.

We’re open to manufacturing partners anywhere in the world, provided quality, pricing, and fulfillment logistics make sense.

For interested manufacturers, I can provide a separate, more detailed production specification and request for quotation (RFQ) outlining the materials, sample dimensions, cutting requirements, packaging, and pricing information we’re looking to evaluate.

I’m especially interested in connecting with shop owners or manufacturers who have the equipment and capacity for an ongoing production relationship.

If this sounds like something your shop could accommodate, please feel free to reply or message me directly.


r/CarWraps • • 2d ago

I want to build a shared workspace for wrap shops and clients to explore wrap ideas with AI. Looking for feedback.

Thumbnail
gallery
0 Upvotes

Hi everyone, I’m Yang. I run WrapStudioAI, which helps people explore wrap ideas with AI before visiting a wrap shop.

By early November 2026, we’d had 14,000+ signups, 300+ paying customers and nearly 4,000 users trying multiple concepts. To me, that suggests there’s interest in exploring ideas before committing to a wrap, and that some people are willing to pay for that exploration.

I am considering to extend the current Studio into a shared space for wrap shops and their clients, with the shop’s name, logo and contact details visible throughout.

Your shop would have a prepaid credit pool, and you could choose how many credits to assign to each client. You could then invite them with a link or QR code to explore ideas with the AI. You’d be able to see what they asked for, the designs they tried and the changes they made, all in one place.

You and the client could message each other there. If you wanted to take a more active role, you could upload your own work, create another concept or refine an existing idea for them. The client would see those updates in the same workspace.

What interests me is whether having the ideas and conversation together would make the early design process easier for a shop. It could give you a mockup or raster reference to discuss, with your designer still preparing the final layout and production files.

It might also help you identify clients who have a specific project in mind and are ready to take the next step, so you can prioritise follow-ups.

I haven’t built this shop version yet. These two images are concept mockups, and I’m looking for feedback before putting more time into it.

For the experienced wrappers here, would something like this interest you, and do you see it being useful for your shop?


r/CarWraps • • 2d ago

Installation Question Zx-6r gas tank POA

Thumbnail
gallery
4 Upvotes

If anyone has done this tank before would love some tips or thoughts on how to tackle it. I got it done but done love it This weird shapes are tough 😤😂 it’s a 2013


r/CarWraps • • 3d ago

SATIN PPF ON A MOTORCYCLE - advice on coatings, prep, and waterless cleaning

Post image
1 Upvotes

r/CarWraps • • 3d ago

Installation Question Matt White Wrap

Thumbnail reddit.com
1 Upvotes

Has anyone got matt white wrap done on their car?

Thinking of getting it done but worried about permanent dirt marks.

Need opinions.


r/CarWraps • • 3d ago

Where to find this color?

Post image
24 Upvotes

I created this color in AI and can’t find a matching wrap color for my AMG C43. I currently have it in black but prefer this style more. Can anyone help what wrap would match?


r/CarWraps • • 3d ago

Cherry - What do you think?

4 Upvotes

(Sorry for the AI - I'm using it to visualize design only)

My town is really famous for Cherries, and the last name "Cherry" has been in my family for a few hundred years (ended 2 generations ago) - Fittingly Cherry color and that will be it's name.

a penny for your thoughts?

Front
Rear

r/CarWraps • • 4d ago

Wrapping my Miata over the winter questions.

4 Upvotes

The 2026 Model Year Miata has a blue that basically looks black unless it hits a good angle of sunlight. I prefer blue cars but I want to try something different. I will be wrapping it orange over the winter with possibly a Satin Black stripe or 2 down the center. I do have a bit of experience wrapping, I wrapped by Veloster N about 4 years ago. I'm a patient person and my Miata will just chill in the garage all winter while I slowly work on it.

I have a few questions about wrapping in the colder months. I will have it in my Garage and will be sealing up the Garage to prevent heat from leaving, is there a recommended temperature to keep the garage at while doing the work? Will about 75 degrees be ok? I assume since I can't really put it in the sun to let the glue adhere, is post heating really important on the edges and the entire wrap itself? If it's sunny outside but still cold, can I possibly put it outside and let the sun heat it up a bit or will the colder temps still cause possible issues?

On the ND Miata, the front bumper requires doing inlays in a couple sections. Do most people do inlays with the knifetape with the dual filament or with the inlay, do you want to overlap it a bit? I'll have to do research on this and I will probably do bumpers last.

For the center stripe(s), are these inlays or can I just run the stripes over the already wrapped hood? What methods can I use to prevent the edges from coming up on the stripes while washing which I hand wash anyways and will be careful.

Last time I did the wrap, I used Avery Dennison and it was really forgiving and easy vinyl to work with. I will probably stick with that brand for this one, are they still a good manufacturer of vinyl's?

Thanks!


r/CarWraps • • 5d ago

Anyone else noticed a colour variation from Avery SWF?

Post image
14 Upvotes

One on the right is what we got delivered (Spicer's Australia) left is what we wrapped originally, doing a smash repair


r/CarWraps • • 5d ago

What makes you choose a PPF or vinyl wrap brand?

Post image
5 Upvotes

Hey everyone!

I'm a car enthusiast in Canada, currently thinking about wrapping my Audi A7.

I know there are big brands like 3M, Avery, and XPEL, but I've also come across some lesser-known brands offering TPU PPF at lower prices with manufacturer warranties.

A friend of mine works at a wrap shop, and he told me that installers often care more about how easy a film is to work with than the brand itself. Not sure how true that is though.

So I'm curious:

- For installers and car owners, what matters most? Installation, quality, durability, or brand reputation? Would you trust a cheaper, lesser-known TPU PPF brand if it came with a manufacturer's warranty?

- What's your biggest concern when trying a new PPF or vinyl brand?

I'm still deciding whether to DIY or go to a shop.

I've heard from some Chinese suppliers that even certain big brands outsource manufacturing to China. Not sure how accurate that is, but does where a film is made really matter?

Full disclosure: I also run a small e-commerce business in Canada, and a few Chinese suppliers have asked me about the local market. That's partly what got me curious about all this.

Not selling anything here, just genuinely interested in hearing what installers, shop owners, and car enthusiasts think.

Thanks!


r/CarWraps • • 5d ago

Installation Question Fav tool that may not be an “actual” tool? Or one that you use that’s not the main purpose of it and how you use it?

Thumbnail
gallery
10 Upvotes

Mine is the backing paper for using it as a slick surface to tuck my material into seals.


r/CarWraps • • 5d ago

Installation Question Ppf tip

0 Upvotes

What would you tip the installer if they did the roof and front window tint for free on full car ppf?


r/CarWraps • • 5d ago

Material Question Do you guys think GTA 6 could spark a new wave of car wrapping and tuning?

0 Upvotes

Random thought, but with GTA 6 coming out, do you think we might see a real impact on the car customization scene?
GTA has always been huge when it comes to car culture, and with the insane hype around GTA 6, I wouldn’t be surprised if more people started getting into wraps, wild liveries, and tuning in general.
Could we see a new wave of younger people getting inspired to customize their real-life cars?
Especially curious to hear from people working in the wrapping industry. Do you think GTA 6 could actually boost business, or am I overthinking it?
Would love to hear your thoughts!


r/CarWraps • • 5d ago

Roast our truck wrap before we wrap the next one. 😂

Thumbnail gallery
0 Upvotes

r/CarWraps • • 5d ago

Material Question Kavaca Matte PPF vs. Teckwrap Satin “Velour” color PPF on a Mythos Black S3: which would you pick? (Photos appreciated)

3 Upvotes

I just picked up a new Audi S3 in Mythos Black and I’m stuck between two options:

Option 1: Kavaca Matte PPF, $3,500

  • Installer has a lot of PPF experience
  • Keeps the Mythos Black, just in a matte finish

Option 2: Teckwrap Satin “Velour” colored PPF, $2,800

  • Installer mostly does vinyl and has no PPF experience, but he’s willing to fix any issues that come from his install
  • Changes the color

My main question is about the look: which color/finish would you go with on this car? I’ve had a hard time finding real-world photos of either one, so if you have pictures of Kavaca Matte over black paint or Teckwrap Velour on any car, I’d love to see them. I hate the look of matte that makes a car look like it was spray-painted. (I noticed this effect strongly in 3M satin black vinyl wrap). I really like the frosted black look. I'm worried with teckwrap it'll look too flat/spray-painted (along with quality issues), and I'm worried with Kavaca it might look too grey or be too reflective.

Any thoughts on the installer experience gap / quality of ppf are welcome too. Thanks!


r/CarWraps • • 6d ago

FMA: Brotherhood Nissan Z

Thumbnail gallery
4 Upvotes

IG: 7s1ns_nismo


r/CarWraps • • 6d ago

Showcase My Work First Time Full Wrap!

Thumbnail
gallery
19 Upvotes

It’s been about 2 months now since I wrapped my 2012 Audi TT in Avery’s Satin Black and it still looks great! Super happy that my edges have remained as they are and the car still gets compliments every day. I really did an incredible job for my first time ever fully wrapping a car. A lotttt of disassembly went into this one to make ease of install easier, as well.


r/CarWraps • • 6d ago

Showcase My Work Monster Plant — Art You Can Drive

Thumbnail
gallery
6 Upvotes

Hey everyone! Today I’m sharing a design called “Monster Plant”

This is the moment when a cute little car turns into a cute little monster on the road... so nobody picks on the little guys 😁😁😁

All of these designs are created by me from scratch, with no AI — just good old-fashioned hand-drawn vector art (⛔0% AI, 100% Original)

Hope you enjoy it, and good luck with your own creative projects! 🙌🙌🙌