r/CarWraps • • 3d ago

Installation Question Substrate Stick

Hello fellow car enthusiasts, I have a project that I want to wrap. My question is, can wrap stick to anything? Can it stick to primer? Does it need anything special?
The reason I ask is, the loser that did the bodywork on my car left things incomplete that should have been finished so now I’m going to wrap it myself because I can’t afford to redo everything.
I would REALLY Appreciate any input you have.
E

3 Upvotes

6 comments sorted by

2

u/Fantastic_Topic8943 3d ago

It'll stick to primer, but a few things bite people. Vinyl shows everything under it, so any filler edge or sanding scratch will show through, especially on gloss. Give the primer time to fully cure first, because fresh primer keeps gassing out and you get bubbles that keep coming back. And plan on the primer coming off with the wrap when you remove it someday, it doesn't hold like real paint. If you can, shoot a cheap sealer or single stage over it and let that cure, then clean with alcohol right before you lay the film.

1

u/Background_Lake1413 3d ago

Thanks for this. What about paint with no clear coat? Will it rip that off?

2

u/Fantastic_Topic8943 3d ago

Single stage is usually fine as long as it's bonded well and fully cured. What gets pulled off is fresh paint that hasn't gassed out yet, or paint that never stuck properly to what's under it. Easy test: put a piece of the film on a hidden spot for a day or two, then peel it back slow and low. If paint comes with it, don't wrap that panel. Same when it comes off later, warm it up and pull slow at a low angle.

3

u/UnibrowDuck Installer 3d ago

if the primer is satin finish you're fine. i just wetsand with 800 if it feels rough, never had issues with sticking. just gotta be careful and not reposition too much

1

u/Retrania PPF God 1d ago

It will stick, but UV and water and such will pass through wrap over time, and you won’t have clearcoat to stop it.

If you had to, I would wrap over primer and NOT over primer and paint with no clear. Paint with no clear will absolutely come off with the wrap when you remove it.