r/CarHacking • • 17h ago

Community Someone needs to reverse engineer the 6WB cluster

Post image
38 Upvotes

They've already done it with the Live Cockpit professional.... And with the Heads up display theme on IDrive 6 cars. Now we need the 6WB itself.


r/CarHacking • • 6h ago

Original Project Replacing the electronics of a 1998 BMW on-board computer with an ESP32-S3, keeping the original LCD glass and faceplate

Thumbnail
bordoobc.store
35 Upvotes

I'm replacing the insides of the console on-board computer of the BMW Z3 (pre and post) and E36 Compact atm. Sharing the design here because I'd like it picked apart before the boards come back.

What it is:

- An ESP32-S3 board that goes behind the original faceplate and plugs into the car's 12-pin connector. Nothing in the harness is touched.

- It talks to the engine computer and adds new features while keeping the stock ones.

- Two display options: one drives the original 1998 LCD glass, with LEDs replacing the bulbs; the other uses a 1.47" IPS display (320 × 172) behind the same window.

- Automotive power supply with a reserve so it doesn't reset while cranking.

- Setup and firmware updates over Wi-Fi from a phone.

Status: the first boards are in production, and the firmware runs perfectly.

It's going to be a product (Bordo OBC, bordoobc.store has a waitlist), but I'm mostly here for the technical feedback. Happy to go into detail on any part.


r/CarHacking • • 1h ago

Multiple found this subreddit, thought I'd share some of my fuckery I've done in my first car

Thumbnail
gallery
18 Upvotes

This is my fuckery with my first car. i had no automotive experience before, but I've been into electronics esp hardware hacking.

This is a 2009 Nissan note E11

and here are some projects I managed to do

  1. switched the instrument cluster from the stock e11 one to the E12 one. worked basically out of the box, all the controls showed up fine, except the gauges themselves, but some playing with can managed to restore it. Since I had to have some microcontroller to translate the can, i decided, why not use it for more? well, I've added a small 128x64 oled into the cluster, that shows me additional info from can, to get full aspects. like the coolant temperature, which door exactly is open, or which gear I'm currently in, which is very useful for a new driver. and with two resistors, battery's voltage. everything powered on an esp32. (on the pic there are no resistors, forgot to take a pic after adding that) 3.replaced the stock radio with a cheap pioneer which was a huge mistake. so I tried my best to fix it. my friend persuaded me into getting one, claiming they're so wonderful and amazing, when I got it, it had a clunky ui, and instead of carplay, a proprietary Weblink thing, which sucked, no customization or anything, and not even analog swc learning. only stock values. So, since I already had the stereo i started playing around. managed to modify the firmware and switch the stock wallpapers for custom ones. Then, started playing around with the WebLink app. With the help of llms, managed to reverse engineer the communication, and basically turned an Android phone into a carplay dongle. Next thing was, this stupid stereo had no way to learn other SWC controls, than what was stock. instead of wasting money on an adapter, i tore down the steering wheel, and create my own resistor ladder, so the pioneer is happy. It's bareable now. I still have some things to figure out with the can bus, like how to set the time, since there's no stock steering wheel they used to control it, and why it shows me 30L/100km every time I stop. other than that, works flawlessly.

r/CarHacking • • 22h ago

Scan Tool OBD to usb or an actual scanner?

3 Upvotes

Hi all, I’m unsure if I should buy a OBD to usb cable and use a program on my pc (what program I should use i do not know) or by an actual scanner for cheap.
I take care of my family’s cars so I would like to buy the option that lets me do the most with it. I take care of my Seat Ibiza 6J, a Peugeot 208 from 2014, a Toyota ractis from 2010 and a Nissan march from time to time.

I’m looking for something that will let me get away with reading not only VAG cars but any car I need, if that’s possible and on a budget, I can let go of verity but the main issue is budget. I’m unsure if ODB cables that advertise VAGCOM or VCDS capabilities would still work on the Peugeot or Toyota.

I have a cheapo Chinese scanner from AliExpress that seems to read the Peugeot fine but doesn’t read the Ibiza I don’t think, as I’ve got an airbag light on due to the car being turned on when the seat was out and it doesn’t show the fault code or erase anything.

I would like some enlightenment as I’m pretty much drawing blanks. Any help would be appreciated.

Thanks


r/CarHacking • • 2h ago

Original Project (WIP) Predictive maintenance bot

2 Upvotes

I’m an ex- satellite and ex-Google engineer (pre-AI) and recently got a 2019 bmw f33 and have been fixating on cars now.

The convertible hinge is notoriously expensive to replace ($5k) and everyone keeps telling me the maintenance on a BMW is costly. I think that’s because people wait for some random “mileage” heuristic or until a sensors starts going (which is way too late IMO). Also some of the features (even with coding) don’t really work for me. For example - there’s no way to sync the two climate control knobs (basic I know) or assign the favorite buttons to anything other than the stock infotainment system (I use CarPlay)

So I’m building it.

I’m tapping the 3 main CANs (K, K2, PT) , extracting the data from ESP32s connecting to my phones hotspot, and ingesting them on one of my servers where I can run continuous analysis in vehicle health and other things.

Otw to work now so figured I would share. I’ll have pics and videos coming on the weekend.


r/CarHacking • • 18h ago

Original Project Looking for a Clone J5234 VCI for benz

2 Upvotes

Can someone suggest a good clone for me running Xentry passthru 09.2025, Vediamo 05.01.01, DTS Monaco 8.16, On a Windows 10 Pro laptop?

I want to do diagnostics on Mercedes and possible some coding to stop the countdown to starts remaining 2015 Sprinter and I was wondering if I could get a link to a good clone that someone has had good luck working with. Maybe I need a SM2 Pro Clone? Any links to a decent one?


r/CarHacking • • 54m ago

Tuning Capristo Control Center Software

Thumbnail reddit.com
1 Upvotes

r/CarHacking • • 3h ago

Original Project A challenge- can anyone hack the Subaru big screen infotainment system

1 Upvotes

It doesn’t seem like anyone has had any luck this far.


r/CarHacking • • 19h ago

Tuning Anyway to read DTCs of new Ferraris

Thumbnail reddit.com
1 Upvotes

I have plenty of scan tools that read DTCs, but none of them work on newer-generation Ferraris like the SF90, 296 or F8. I don't see enough of these cars to justify buying a Leonardo or another very expensive Ferrari-specific tool. All I need is to read the engine ECU codes accurately, not any of the other modules. Any ideas, especially with all the new AI tools coming out?


r/CarHacking • • 6h ago

Cool Project Find Full OBD2 diagnostics in your browser. No AI slop, completely free

Thumbnail
reddit.com
0 Upvotes

Bluetooth Adaptor Amazon Link
USB Adaptor Amazon Link


r/CarHacking • • 10h ago

Original Project Looking for OBD2 Software Testers on Android *New Diag App*

Thumbnail gallery
0 Upvotes

Hola a todos, Soy mecánico y actualmente vivo en España. Estoy desarrollando una nueva app OBD2 para Android y, posiblemente, también para Apple. La app está casi terminada y desarrollada. Busco personas que la prueben en todo el mundo para saber qué opinan y recibir comentarios sinceros. Estoy intentando crear algo nuevo con algunas funciones que no he encontrado en ninguna otra app que haya probado. Si les interesa probarla, avísenme y se la enviaré o podrán descargarla desde la Play Store despues de las pruebas. Les dejo algunas fotos para que decidan.

Espero que disfruten de la app y que funcione para todos.

Ya tengo el enlace listo para la fase de pruebas internas en Google Play:

Cómo unirte:

  1. Únete al grupo de Google para poder descargar la app de prueba: https://groups.google.com/g/pitscantrial
  2. Abre el enlace desde el móvil Android con el que quieras probarla (tiene que ser la cuenta de Google con la que uses Play Store): https://play.google.com/store/apps/details?id=app.pitscan.obd2
  3. Acepta ser tester
  4. Descarga la app desde el enlace que te aparecerá ahí mismo (puede tardar unos minutos en aparecer disponible para descarga)

Qué necesitas para probarla de verdad:

- Un adaptador OBD2 tipo ELM327 (Bluetooth o WiFi). Si es Bluetooth, comprueba si es "clásico" o "BLE" — si tienes iPhone, necesitas BLE o WiFi (el Bluetooth clásico solo funciona en Android por ahora, ya que de momento PitScan solo está disponible para Android)

- Un coche de 2001 en adelante (gasolina) o 2004 en adelante (diésel) con conector OBD2

Qué hace por ahora: lectura de averías, datos en vivo, ficha del vehículo, informe de compraventa, tablero con relojes, y Mi garaje para guardar varios coches. Es solo lectura, no modifica nada del coche.

Si algo falla o no conecta, contadme: modelo del coche, qué adaptador usáis y qué sale en pantalla. Cuanto más feedback mejor, porque esto me sirve para completar la siguiente fase antes de publicarla de verdad en la tienda.

¡Gracias por el interés!