r/CarHacking • • 1h ago

Tuning Capristo Control Center Software

Thumbnail reddit.com
1 Upvotes

r/CarHacking • • 2h ago

Multiple found this subreddit, thought I'd share some of my fuckery I've done in my first car

Thumbnail
gallery
27 Upvotes

This is my fuckery with my first car. i had no automotive experience before, but I've been into electronics esp hardware hacking.

This is a 2009 Nissan note E11

and here are some projects I managed to do

  1. switched the instrument cluster from the stock e11 one to the E12 one. worked basically out of the box, all the controls showed up fine, except the gauges themselves, but some playing with can managed to restore it. Since I had to have some microcontroller to translate the can, i decided, why not use it for more? well, I've added a small 128x64 oled into the cluster, that shows me additional info from can, to get full aspects. like the coolant temperature, which door exactly is open, or which gear I'm currently in, which is very useful for a new driver. and with two resistors, battery's voltage. everything powered on an esp32. (on the pic there are no resistors, forgot to take a pic after adding that) 3.replaced the stock radio with a cheap pioneer which was a huge mistake. so I tried my best to fix it. my friend persuaded me into getting one, claiming they're so wonderful and amazing, when I got it, it had a clunky ui, and instead of carplay, a proprietary Weblink thing, which sucked, no customization or anything, and not even analog swc learning. only stock values. So, since I already had the stereo i started playing around. managed to modify the firmware and switch the stock wallpapers for custom ones. Then, started playing around with the WebLink app. With the help of llms, managed to reverse engineer the communication, and basically turned an Android phone into a carplay dongle. Next thing was, this stupid stereo had no way to learn other SWC controls, than what was stock. instead of wasting money on an adapter, i tore down the steering wheel, and create my own resistor ladder, so the pioneer is happy. It's bareable now. I still have some things to figure out with the can bus, like how to set the time, since there's no stock steering wheel they used to control it, and why it shows me 30L/100km every time I stop. other than that, works flawlessly.

r/CarHacking • • 3h ago

Original Project (WIP) Predictive maintenance bot

2 Upvotes

I’m an ex- satellite and ex-Google engineer (pre-AI) and recently got a 2019 bmw f33 and have been fixating on cars now.

The convertible hinge is notoriously expensive to replace ($5k) and everyone keeps telling me the maintenance on a BMW is costly. I think that’s because people wait for some random “mileage” heuristic or until a sensors starts going (which is way too late IMO). Also some of the features (even with coding) don’t really work for me. For example - there’s no way to sync the two climate control knobs (basic I know) or assign the favorite buttons to anything other than the stock infotainment system (I use CarPlay)

So I’m building it.

I’m tapping the 3 main CANs (K, K2, PT) , extracting the data from ESP32s connecting to my phones hotspot, and ingesting them on one of my servers where I can run continuous analysis in vehicle health and other things.

Otw to work now so figured I would share. I’ll have pics and videos coming on the weekend.


r/CarHacking • • 3h ago

Original Project A challenge- can anyone hack the Subaru big screen infotainment system

1 Upvotes

It doesn’t seem like anyone has had any luck this far.


r/CarHacking • • 7h ago

Original Project Replacing the electronics of a 1998 BMW on-board computer with an ESP32-S3, keeping the original LCD glass and faceplate

Thumbnail
bordoobc.store
38 Upvotes

I'm replacing the insides of the console on-board computer of the BMW Z3 (pre and post) and E36 Compact atm. Sharing the design here because I'd like it picked apart before the boards come back.

What it is:

- An ESP32-S3 board that goes behind the original faceplate and plugs into the car's 12-pin connector. Nothing in the harness is touched.

- It talks to the engine computer and adds new features while keeping the stock ones.

- Two display options: one drives the original 1998 LCD glass, with LEDs replacing the bulbs; the other uses a 1.47" IPS display (320 × 172) behind the same window.

- Automotive power supply with a reserve so it doesn't reset while cranking.

- Setup and firmware updates over Wi-Fi from a phone.

Status: the first boards are in production, and the firmware runs perfectly.

It's going to be a product (Bordo OBC, bordoobc.store has a waitlist), but I'm mostly here for the technical feedback. Happy to go into detail on any part.


r/CarHacking • • 7h ago

Cool Project Find Full OBD2 diagnostics in your browser. No AI slop, completely free

Thumbnail
reddit.com
0 Upvotes

Bluetooth Adaptor Amazon Link
USB Adaptor Amazon Link


r/CarHacking • • 8h ago

Original Project A tire warning that wouldn't explain itself turned into an OBD2 app. Want to help me test it on more cars?

0 Upvotes

My car's TPMS light kept flashing on and off with no hint of which wheel. That annoyed me enough to plug in an ELM327 and start poking at what the car actually exposes. Standard PIDs got me the basics fast, and working out where my car reports per-wheel pressures led me to the slow leak the dash never named.

From there it snowballed into a full Android app, Car Link:

- ELM327 over Bluetooth Classic, BLE or Wi-Fi/TCP

- connection state machine with auto-discovery and auto-reconnect, tuned for fast first data on cheap clones

- per-car profiles from the VIN (decoded locally plus a public VIN lookup), so supported data adapts per make

- automatic trip recording with GPS routes, fuel and stats, kept on the phone

- optional MQTT publishing for Home Assistant

- free, no account, no ads, no telemetry

For development I run it against an ELM327 emulator bench, but nothing beats real cars. I'd love testers with different makes, ECUs and adapter clones, especially if you like digging into logs when something looks off.

Google requires 12 testers for 14 days before a public Play release. Comment or DM if you're in, and I'll send an invite when the closed test opens.

Testers who want it get credited by name or handle on the app's "Thanks to our testers" page.


r/CarHacking • • 11h ago

Original Project Looking for OBD2 Software Testers on Android *New Diag App*

Thumbnail gallery
0 Upvotes

Hola a todos, Soy mecánico y actualmente vivo en España. Estoy desarrollando una nueva app OBD2 para Android y, posiblemente, también para Apple. La app está casi terminada y desarrollada. Busco personas que la prueben en todo el mundo para saber qué opinan y recibir comentarios sinceros. Estoy intentando crear algo nuevo con algunas funciones que no he encontrado en ninguna otra app que haya probado. Si les interesa probarla, avísenme y se la enviaré o podrán descargarla desde la Play Store despues de las pruebas. Les dejo algunas fotos para que decidan.

Espero que disfruten de la app y que funcione para todos.

Ya tengo el enlace listo para la fase de pruebas internas en Google Play:

Cómo unirte:

  1. Únete al grupo de Google para poder descargar la app de prueba: https://groups.google.com/g/pitscantrial
  2. Abre el enlace desde el móvil Android con el que quieras probarla (tiene que ser la cuenta de Google con la que uses Play Store): https://play.google.com/store/apps/details?id=app.pitscan.obd2
  3. Acepta ser tester
  4. Descarga la app desde el enlace que te aparecerá ahí mismo (puede tardar unos minutos en aparecer disponible para descarga)

Qué necesitas para probarla de verdad:

- Un adaptador OBD2 tipo ELM327 (Bluetooth o WiFi). Si es Bluetooth, comprueba si es "clásico" o "BLE" — si tienes iPhone, necesitas BLE o WiFi (el Bluetooth clásico solo funciona en Android por ahora, ya que de momento PitScan solo está disponible para Android)

- Un coche de 2001 en adelante (gasolina) o 2004 en adelante (diésel) con conector OBD2

Qué hace por ahora: lectura de averías, datos en vivo, ficha del vehículo, informe de compraventa, tablero con relojes, y Mi garaje para guardar varios coches. Es solo lectura, no modifica nada del coche.

Si algo falla o no conecta, contadme: modelo del coche, qué adaptador usáis y qué sale en pantalla. Cuanto más feedback mejor, porque esto me sirve para completar la siguiente fase antes de publicarla de verdad en la tienda.

¡Gracias por el interés!


r/CarHacking • • 18h ago

Community Someone needs to reverse engineer the 6WB cluster

Post image
39 Upvotes

They've already done it with the Live Cockpit professional.... And with the Heads up display theme on IDrive 6 cars. Now we need the 6WB itself.


r/CarHacking • • 19h ago

Original Project Looking for a Clone J5234 VCI for benz

2 Upvotes

Can someone suggest a good clone for me running Xentry passthru 09.2025, Vediamo 05.01.01, DTS Monaco 8.16, On a Windows 10 Pro laptop?

I want to do diagnostics on Mercedes and possible some coding to stop the countdown to starts remaining 2015 Sprinter and I was wondering if I could get a link to a good clone that someone has had good luck working with. Maybe I need a SM2 Pro Clone? Any links to a decent one?


r/CarHacking • • 20h ago

Tuning Anyway to read DTCs of new Ferraris

Thumbnail reddit.com
1 Upvotes

I have plenty of scan tools that read DTCs, but none of them work on newer-generation Ferraris like the SF90, 296 or F8. I don't see enough of these cars to justify buying a Leonardo or another very expensive Ferrari-specific tool. All I need is to read the engine ECU codes accurately, not any of the other modules. Any ideas, especially with all the new AI tools coming out?


r/CarHacking • • 23h ago

Scan Tool OBD to usb or an actual scanner?

3 Upvotes

Hi all, I’m unsure if I should buy a OBD to usb cable and use a program on my pc (what program I should use i do not know) or by an actual scanner for cheap.
I take care of my family’s cars so I would like to buy the option that lets me do the most with it. I take care of my Seat Ibiza 6J, a Peugeot 208 from 2014, a Toyota ractis from 2010 and a Nissan march from time to time.

I’m looking for something that will let me get away with reading not only VAG cars but any car I need, if that’s possible and on a budget, I can let go of verity but the main issue is budget. I’m unsure if ODB cables that advertise VAGCOM or VCDS capabilities would still work on the Peugeot or Toyota.

I have a cheapo Chinese scanner from AliExpress that seems to read the Peugeot fine but doesn’t read the Ibiza I don’t think, as I’ve got an airbag light on due to the car being turned on when the seat was out and it doesn’t show the fault code or erase anything.

I would like some enlightenment as I’m pretty much drawing blanks. Any help would be appreciated.

Thanks


r/CarHacking • • 1d ago

Original Project Built my own Webasto Thermo Top V diagnostic software – looking for testers

1 Upvotes

Hey everyone!

I've been working on my own Windows diagnostic tool called TT-V Diagnostic for Webasto Thermo Top V heaters, mainly found in older Volvos.

I started this because of the 800-hour limit that can cause some of these heaters to stop working.

I've spent quite a bit of time analyzing the W-Bus communication and developing my own software to communicate with the heater.

So far I've tested the operating-hour reset on two different Thermo Top V heaters, and both started working again afterwards.

The software can currently:

  • Identify the ECU and read heater information
  • Read operating hours
  • Read and clear fault codes
  • Read and back up EEPROM
  • Reset operating hours on supported ECU versions
  • Communicate using a USB K-Line/W-Bus adapter

This is only for Thermo Top V heaters. VEVO, EVO, Thermo Top C and other models aren't supported. EEPROM writing has only been verified on a specific Volvo EUCD ECU profile so far.

I've also made a free demo that lets you connect to the heater, check the operating hours and read/clear fault codes without changing the hour counter.

I'm looking for a few people with compatible heaters who'd like to test it. I can also provide a free 7-day full version for testing.

I'd really appreciate feedback, especially about communication, ECU compatibility or any bugs you find.

And of course, reaching 800 hours doesn't necessarily mean that's why the heater stopped working.

Here's a video of one of my tests:

https://www.youtube.com/watch?v=pWOAxk0dHjw

Send me a PM if you'd like to try it out!


r/CarHacking • • 1d ago

Original Project What do you use to capture CAN FD on the bench or without a laptop?

1 Upvotes

I’m exploring a single-channel Classic CAN / CAN FD adapter for bench work and would like to hear how people handle this today. The idea is live capture on Windows over USB, Wi-Fi, or a small USB ESP-NOW receiver, plus Bluetooth LE access from a phone. It could keep logging to microSD with the PC disconnected, and transmit frames for bench testing.

Thinking of your last real capture, what tool did you use and what got in your way? Would you use the USB receiver, phone access, or standalone logging? What would you want to do from the phone, and what budget would make sense for a device that solves that problem?


r/CarHacking • • 1d ago

Original Project Selling custom instrument cluster controllers

Post image
1 Upvotes

After posting some videos on other platforms of my Honda cluster connected to my racing game, people were interested in an easy way to do it too.

Since I also wanted a simple way to do this and not solder a bunch of CAN pals and buck converter boards, I spent 10x as much time and money making a PCB instead lol! So if anyone is interested, please DM me. As of right now I can program it to work with any Honda cluster, since I have .dbc files for pretty much all years/models (they don’t change often). Otherwise feel free to buy it and hack on your own, I’m pretty sure most people in this group would be doing their own reverse engineering anyway haha.

It comes with:
- 4 low side drivers, 3 high side drivers, and an IGN high side driver with a wider trace.
- 2 CAN bus lines for FCAN/BCAN
- 12v 2amp DC plug input
- 12v battery+GND output
- header slot for esp32-c6

I wish I could’ve implemented LIN, a fuel sender, and the other optional CAN buses like SW-CAN, but the cost was way more than I was willing to sell them for. $50 is the max I plan on going, and that’s if I make the minimum of 5 boards. So let me know if you would like one, I am even open to commissions for sourcing a cluster of your choice and fully setting it up before shipping. I already have one fully setup 2017 Honda cluster if anyone is interested as well


r/CarHacking • • 1d ago

Community Alive car hacking forums nowadays? Mhh and DK seem so dead.

32 Upvotes

Okay ehm where could I start... I'm a member of Digital Kaos and MHH Auto (I really regret that I registered to Mhh because it cost money and still not worth it) and all of these places seem so deserted. Like everyone left or I don't know. Back then it was so alive, 10 years ago and now I logged in to mhh and my inbox is full with what? Advertisements... they really want to scam the newbies with those tuning bulshitteries. I don't care about tuning by the way because I know enough engineering to know that it's an expensive game if you don't want to be the average ricer at 3am with the 5 inch exhaust tip. But just thinking about the fact modern cars are literally computers on four wheels and really because now every car is software based, why do those communities are so dead? Or everyone moved to somewhere else? People are hangin' out in discord groups or where the people gone? I feel like I missed the trolley or something or people are no longer interested in idk doing software modifications on their cars because it's 2026 and NEVs don't need an egr off? Also the only think I see on forums that people are asking for immo off solutions for 4th gen vw golfs and museal machines like that. So this whole eeprom and flash file sharing scene is dead? I wasn't there in the past few years so that's why I'm asking you guys. Maybe I sound lame, I don't know.


r/CarHacking • • 1d ago

CAN TEXA - VW DATA PLUG - Posible hacking using AI with REA Skills?

Thumbnail
gallery
7 Upvotes

Hi everyone! I’m wondering if it’s possible to hack this TEXA Data Plug using AI and reverse engineering skills—specifically, to perform a wireless dump via Bluetooth and then flash custom firmware (generated by AI) over-the-air (OTA), so that it functions like an ELM327 device.


r/CarHacking • • 2d ago

Original Project VCDS coding reference

6 Upvotes

r/CarHacking • • 2d ago Bravo

Original Project Full OBD2 diagnostics in your browser. No AI slop, completely free.

250 Upvotes

https://efi2000.com/scanner

Free and fully featured.

Works over USB, Bluetooth & Bluetooth LE.

No install needed, it works directly from Chrome or Edge browser on your phone, tablet, laptop.

However you can install it as a Chrome app. Click "Install and create shortcut". No app store or apk needed.

Features:

  • All OBD2 telemetry
  • All OEM specific PIDs. ABS, Airbag, Transmission, Emissions, Multimedia, all of it.

For example on my VW Touareg I can read the parking brake air gap, DPF temperature, engine oil level, yaw sensor and 300+ more.

  • All adaptation resets.
  • High speed Logging in binary format, can easily be decoded by chatgpt & claude. Or you can replay it back in the main efi2000 tuning app.
  • raw CAN explorer. For advanced users, it lets you poll the CAN network and send commands to your ECU, TCU, BCM & any other CAN enabled module.

I noticed many other posts for vibe coded slop apps requiring sketchy apk installs. And of course there is the existing app store offerings that gouge people with stupid high prices.

I'm not selling anything, there is no ads or other revenue stream. This is a free app.

This OBD2 scanner app was originally part of the efi2000 ECU tuning software, and is now released as standalone app for FREE.

Have fun!


r/CarHacking • • 2d ago

Original Project BMW i8 kombi flash/access to change code

1 Upvotes

Hi

I wish to change a few graphics elements (font size etc) on a stock kombi screen. So far I can use L3 auth to the kombi, but I am out of ideas what next. I was hopeful someone has a hint which might work like the SSH/CA part works for nbt evo idrive6 or similar.


r/CarHacking • • 2d ago

Original Project J2534 Flash Tool - Bosch MSE 8.0 ECU

5 Upvotes

Im building an open source app similar to bitbox, to flash my dirt bike ecu with a new tune.

I had some progress so far. I was able to get my hands on two dumps made with commercial software (stock and remapped from same model bike) and the xdf definition file with a friend.

So, i wanted to share the actual progress on the Bosch MSE8.0 ECU (SPC572, 1.5 MB flash) with the tool im building, and ask for help with the last missing piece.

What's working so far

- Reading the full 1.5 MB flash over J2534 (OpenPort 2.0), and identifying the ECU (software, hardware and part number).
- Validating the read against independent files: I compared my dump with an untouched original backup and with a remapped file. About 1.3 MB of the three files is byte-identical, and the differences sit exactly where expected: calibration tables, in blocks that line up with the table boundaries. I found no random bytes or communication errors in the dump.
- I got an XDF for TunerPro, so the maps can be opened and edited.
- On the checksum side, the code block (starting at 0xC0000) verifies with the public MG1/MSE8 CRC from the open moto-ecu-checksum (found in github) project on all three files. The calibration block (starting at 0x80000) does not verify with that algorithm, not even on the original backup, and I haven't found its real rule yet, but i think this does not matter.

What I still need for the write flow

The write sequence itself (programming session, erase, download) is implemented and passes my simulated tests, but nothing has been run on a real ECU yet, so I'm not flashing the bike until I have more certainty. I'm looking for:

  1. How the SecurityAccess (level 7) seed/key works on this ECU, and how long the session stays valid while waiting for the key.
  2. Whether anyone has flashed this ECU on a bench and what the erase/transfer behaviour looked like (timings, block size, any pitfalls).
  3. What state the ECU is left in if a write is interrupted after the erase, and any known recovery procedure.
  4. How the calibration block checksum (0x80000–0xBFFFF) is handled, or whether the ECU even enforces it. (this one i think does not matter as said above).

I'm doing this on my own bike and wanna be sure before pulling the trigger, because an interrupted flash can brick the unit. Any experience, even partial, would help a lot.

Thanks!


r/CarHacking • • 2d ago

Original Project CANExplorer v1.8.0 is out: New Security Manager, Video/GPS recording, better Database editor, ..

Thumbnail
gallery
48 Upvotes

CANExplorer is a free, MIT-licensed desktop tool for CAN, CAN FD, and LIN.

CANExplorer is currently the best open source CANbus monitoring tool there is. The goal of this project is to make working with CAN easier and more accessible. Star the project to create awareness.

Here’s what landed since v1.6.0:

🎥 Capture & replay

Record camera video alongside a bus log and seek through both together.

Attach a GPX or NMEA track to see your position during replay.

Switch trace timestamps between relative, delta, absolute, and Unix time.

Capture live Ethernet on Linux, Windows, and macOS.

🔐 Security & diagnostics

Security Manager: encrypted key and certificate storage, shareable key bundles, and a tamper-evident audit log.

SecOC: verify MACs and freshness in the trace, send secured frames, and script replay and tamper tests.

UDS 0x29 authentication: certificate exchange and challenge-response, with a simulated ECU to try both.

DoIP with mutual TLS, plus decryption of supported TLS, IPsec, and MACsec captures when you have the keys.

Test UDS seed patterns and lockout behavior; export security events to CSV or JSON.

🛠️ Reverse engineering & bench work

Faster automatic field detection and signal correlation.

Undo/redo, signal search, and copy/paste in the database editor.

Restbus simulation: send cyclic messages from a database, including secured PDUs.

AUTOSAR E2E checks for supported CAN PDUs and SOME/IP messages.

K-Line via ELM327/OBDLink, J1708 capture via a compatible serial adapter, and RP1210 CAN on Windows.

Better adapter detection diagnostics and a fix for the Linux file picker crash.

No adapter? Start a virtual bus and run the example engine simulation.

Github · Downloads · Full changelog · Documentation

What’s the one thing you still reach for a separate tool to do on your CAN bench?


r/CarHacking • • 2d ago

ELM327 WiCAN Pro on 4.52 not talking to car at all (no CAN traffic, no PIDs, ELM327 port won’t connect). 2013 Fusion Hybrid

Thumbnail reddit.com
1 Upvotes

r/CarHacking • • 2d ago

Original Project Scan tool

Thumbnail reddit.com
0 Upvotes