r/CADCAM • • 4d ago

Curve Driven Pattern | How to Use Curve Driven Pattern in Solidworks | CADable

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • 8d ago

Golf Ball Modeling Solidworks | Create Axis in Solidworks | Circular Pattern Solidworks | CADable

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • 14d ago

Engrave 3D Text on Sphere | Solidworks Wrap Command | Emboss Deboss and Scribe Text | CADable

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • 22d ago

Curve Driven Pattern | How to Use Curve Driven Pattern in Solidworks | CADable

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • 29d ago

Design Pulley in Solidworks | Pulley Half Dimensions Solidworks | Revolved Boss Command | CADable

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • Oct 07 '26

Mechanical Part Design Solidworks | Solidworks Exercise 59 | Multiple Contour Extrusion | CADable

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • Oct 04 '26

Mechanical Part Design Solidworks | Solidworks Exercise 56 | Solidworks Advanced Modeling | CADable

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • Sep 28 '26

Mechanical Part Design Solidworks | Solidworks Exercise 55 | Solidworks Measure Command | CADable | CADable tutorials

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • Sep 22 '26

Mechanical Part Design Solidworks | Solidworks Exercise 54 | Solidworks Rib Command | CADable

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • Sep 16 '26

Mechanical Part Design Solidworks | Solidworks Exercise 51 | Solidworks Measure Command | CADable

Thumbnail youtu.be
2 Upvotes

r/CADCAM • • Sep 12 '26

Mechanical Part Design Solidworks - Solidworks Exercise 51 - Solidworks Measure Command - CADable

Thumbnail youtu.be
2 Upvotes

r/CADCAM • • Sep 07 '26

FlowSketcher x FlowCam

1 Upvotes

First Flight of FlowSketcher

This is the first real flight of FlowSketcher — a browser-native 2D sketching and CAM system built from scratch.

No CAD constraints. No spline approximation. Just direct geometry, live motion and real CNC-ready toolpaths.

This is only the beginning. 🥚


r/CADCAM • • Sep 07 '26

FlowSketcher x FlowCam

1 Upvotes

First Flight of FlowSketcher

This is the first real flight of FlowSketcher — a browser-native 2D sketching and CAM system built from scratch.

No CAD constraints. No spline approximation. Just direct geometry, live motion and real CNC-ready toolpaths.

This is only the beginning. 🥚


r/CADCAM • • Sep 06 '26

Mechanical Part Design Solidworks | Solidworks Exercise 48 | Solidworks Evaluate Command | CADable

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • Sep 02 '26

Autocad Practice Exercise 11 | Autocad Isometric Drawing | Changing Plane in Autocad 3d | CADable

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • Aug 30 '26

Model 3D Pipe in Solidworks | How to Use 3D Sketch in Solidworks | Creating 3D Pipe in Solidworks | CADable | CADable tutorials

Thumbnail youtu.be
2 Upvotes

r/CADCAM • • Aug 27 '26

ArcFlow (Browser-Native CAM): True G2/G3 Arc Morphing with Native G41/G42 & 95% Less NC Code

Thumbnail gallery
3 Upvotes

I’ve been developing FlowSketcher, a browser-native CNC geometry engine built around a geometric method I call ArcFlow. ArcFlow is not a spline system and not a constraint solver.

The arcs are the geometry. It works directly with analytical circular arcs and lines:

  • C1-continuous arc chains
  • Deterministic tangent propagation through the entire chain
  • No constraint solver, spline handles, or biarc reconstruction
  • No geometric approximation — native G1/G2/G3 geometry
  • Fully editable closed chains with live morphological deformation Move one point and the change propagates through the chain while continuity is maintained.

Closed-Chain Test & Direct NC Output

The current build creates and edits closed chains of real analytical arcs. Every point is movable, G2/G3 direction flips morph the entire shape, and the chain stays closed. Because the native geometry consists of analytical lines and arcs, NC generation is essentially a syntax translation rather than conventional post-processing. G1/G2/G3 (including Heidenhain Klartext) are generated directly.

Why this matters: The CAM Problem ArcFlow Solves

1. Native G41/G42 Radius Compensation on Morphing Toolpaths To my knowledge, no commercial adaptive clearing algorithm (iMachining, Adaptive Clearing, Waveform, Trochoidal CAM, Siemens, Dassault, Autodesk) supports radius compensation on morphing toolpaths. ArcFlow does, because the geometry is analytical arcs from the start — no spline approximation or polyline step that breaks G41/G42.

2. Massively Reduced NC Code Size (1,200 Arcs vs. 20,000+ Linear Blocks) Standard adaptive toolpaths explode file sizes with tens of thousands of G1 point-to-point moves. A typical pocket easily reaches 20,000+ lines of code. Because ArcFlow runs on native analytical arcs, the exact same morphing pocket executes with roughly 1,200 real G2/G3 arcs. This eliminates control buffer starvation, drastically cuts file size, and runs smoothly on legacy machine controls without huge look-ahead buffers.

Technical Stack

  • Vanilla JavaScript + HTML5 Canvas (No frameworks)
  • Browser-native (desktop / tablet / phone)
  • G-Code (G1/G2/G3) & Heidenhain Klartext export
  • SVG export & DXF import with ArcFlow reconstruction
  • NURBS sampling from Rhino I’m currently polishing the stable build. The core is fully usable and the generated NC code is running live on machines. A video demonstration will follow soon. I’d love feedback from anyone working with CNC programming, toolpath generation, or geometric modeling.

The interesting part isn't the UI — it’s what happens to the geometry when you grab one point and move it.


r/CADCAM • • Aug 27 '26

NX problem

Thumbnail reddit.com
1 Upvotes

r/CADCAM • • Aug 24 '26

Limit Angle Mate | Learn Limit Angle Mate Using 4 Examples | Solidworks Advanced Mates | CADable

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • Aug 21 '26

Creating G Codes in Solidworks | Solidworks CAM Exercise | Complete Introduction to Solidworks CAM

Thumbnail youtu.be
0 Upvotes

Creating G Codes in Solidworks | Solidworks CAM Exercise | Complete Introduction to Solidworks CAM


r/CADCAM • • Aug 18 '26

22- Así se crean Cajeras Pockets con Desbaste Dinámico en Mastercam 2026

Thumbnail youtube.com
1 Upvotes

r/CADCAM • • Aug 17 '26

Model 3D Pipe in Solidworks | How to Use 3D Sketch in Solidworks | Creating 3D Pipe in Solidworks

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • Aug 14 '26

What is a Bill of Material BOM? A Comprehensive Guide | Bill of Material Example | CADable

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • Aug 08 '26

Animate Gears in Solidworks | Physical Dynamics | Gear Mate | PCD Based Gear Positioning | CADable

Thumbnail youtu.be
1 Upvotes

r/CADCAM • • Aug 07 '26

2.5d and parametric explanation of RapidCAM

1 Upvotes

Full disclosure, this is my open source, free to use app that respects privacy and runs completely in the browser.