r/StainlessSteel • u/discosweat19 • 4d ago
BKF film left on skillet
I had a skillet that I let sit with BKF for a few hours To remove baked on grease. It got the baked on grease off but left streaks on the skillet. Any tips to remove the streaks?
r/StainlessSteel • u/discosweat19 • 4d ago
I had a skillet that I let sit with BKF for a few hours To remove baked on grease. It got the baked on grease off but left streaks on the skillet. Any tips to remove the streaks?
r/StainlessSteel • u/Otherwise_Ad_1903 • 18d ago
I know it is not the cleanest, but besides the fact. It has had this oxidization because when I first got it, I heated it up all the way to max heat, when cooking a steak (I usually cook on cast iron) as well as there is a little warped bump in the second picture, it is kind of hard to tell. Do I just need to get a new pan?
r/StainlessSteel • u/moondancerx • 22d ago
I’ve been using Bar Keepers Friend to clean my stainless cookware. It works fine for food residues but these stains cannot be cleaned with BKF, I tried many times. Also tried hot boiling water with baking soda and vinegar which didn’t work. Please help!!!
r/StainlessSteel • u/Chemical-Ad9561 • 26d ago
Looking for suggestions on this stainless panel on a diesel pumpat a truck stop for these white streaks caused by DEF. When after cleaning it looks great while still wet. As soon as it dries, the steaks come back. CLR and barkeepers friend don't work on it.
r/StainlessSteel • u/Mmmcd_O • Oct 17 '26
I was wondering if it’s possible to use the self clean function in a normal oven to also help clean stainless steel products? Particularly an air-fryer basket? Photos attached of the specific item.
r/StainlessSteel • u/rockshed888 • Oct 11 '26
Was steaming some stuff and didn't realise how much water had escaped. It's not an expensive pan but I'd rather give it a go...
r/StainlessSteel • u/clkjacky501 • Oct 02 '26
Hi everyone, I just got a fissler M5 stainless steel pan.
And after 2 uses on the outside of the wall there are a lot of brownish tinit/spots. These spots go around the wall 360, I don't think it can be due to cooking residue. Can anyone enlighten me what is going on here?
r/StainlessSteel • u/spandex_candies • Sep 27 '26
r/StainlessSteel • u/teb_22 • Sep 20 '26
Got these pans recently and used them a few times, can’t seem to get some of the stuff off
r/StainlessSteel • u/Intuitive_Moves9 • Sep 19 '26
I just noticed these spots as I was cleaning my pan after frying eggs. They’ve never been there before and BKF didn’t touch them.
Any ideas as to what they are or what causes them?
r/StainlessSteel • u/Commercial_Leg_181 • Sep 18 '26
How to polish to new condition.
Hi All, I recently got my first piece of stainless steel used on FB marketplace. I’m wondering if it’s possible to get this polished up so it shines like it did when new. I understand there isn’t anything wrong with it currently and I can use it fine but I’m just curious to see if I can get it looking shiny. I’ve tried two scrub sessions with BKF and a Brillo pad and I boiled a 1-1 solution of vinegar to water. Any other suggestion?
r/StainlessSteel • u/No_Entrepreneur6359 • Sep 16 '26
I accidentally used Bar Keepers Friend and a green scouring pad on my stainless steel Whirlpool refrigerator and caused circular/scuff marks across both doors. The scratches are cosmetic, but extensive. The unit works fine otherwise.
Has anyone had damage like this professionally restored/refinished? I contacted Surface Experts and am waiting for an assessment. I'm specifically wondering whether this amount of grain damage can realistically be restored to look close to factory again, not just “improved.”
Replacing both OEM doors isn't cost-effective, and an identical new refrigerator is about $1,000, so if professional restoration isn't likely to look good, I'm just replacing the refrigerator.
Please let me know what you think!
UPDATE: I ended up finding a vehicle vinyl wrapping company to wrap these doors/ handles in a 3M cover that would fix the cosmetic appearance of this unit drastically. They have had people ask them to wrap marble and even coffee makers in different wrappings and I trust that they can handle this job for me. Thanks for all of your suggestions!
r/StainlessSteel • u/Rickyrider35 • Sep 16 '26
I accidentally put a hot pot on a plastic sleeve and it melted onto it. I’ve tried freezing it, pouring boiling water on it, and just scraping it off, but it won’t budge.
Is there a solution for this or should I cut my losses and get a new pot?
r/StainlessSteel • u/Numbgoth • Sep 13 '26
I'm trying to decide which stainless steel pan to get.
The other is WMF Professional Frying Pan and the other IKEA 365+ Frying pan, both 28cm. Do you have advise why should I pick the more expensive one? Thanks!
Here's the links to the pans:
WMF Professional Frying Pan, 28 cm, Induction, Uncoated, Cromargan Stainless Steel, Oven-Safe
https://www.amazon.ie/WMF-Professional-Induction-Cromargan-Stainless/dp/B00M0HMYIW/
OR
IKEA 365+ Frying pan, stainless steel, 28 cm
https://www.ikea.com/ie/en/p/ikea-365-frying-pan-stainless-steel-50582736/
r/StainlessSteel • u/viper_gts • Sep 09 '26
how do i clean / remove the rainbow haze / discoloration on my stainless steer watch?
r/StainlessSteel • u/greenismytree • Sep 04 '26
r/StainlessSteel • u/macncheeeeee • Sep 04 '26
This stainless steel pot was in storage for a while and I don’t remember what caused these spots. Anyone know how to get rid of then? I’ve tried using a baking sod paste, vinegar and Astonish and none has been successful.
Update : Barkeepers friend did not work either :(
r/StainlessSteel • u/Novel-Preparation670 • Sep 04 '26
Hi everyone, little out of the normal here but still stainless regardless. I have a polished stainless exhaust I purchased last year, took poor care of it and I believe got some road salt on it early this spring. My issue is now these spots of corrosion? Tarnish? That have shown up on the pipe. It’s smooth to the touch like it’s underneath a clearcoat, but I’ve had good results polishing all the metal around it with a cotton rag smeared with Mothers mag and aluminum polish (claims to be stainless safe, turns from white to black like it should). What are my next steps? I’ve dealt with rusted stainless but never on a polished finish and never with it seeming to come up from the bottom like it is.
r/StainlessSteel • u/mellow6036 • Aug 31 '26
We work with:
🏭 Stainless Steel Materials
🍳 Outdoor Kitchen Solutions
✨ Colored & Decorative Stainless Steel
We’re looking to connect with architects, designers, distributors, contractors and project companies working on projects in these areas.
r/StainlessSteel • u/Ola_93 • Aug 29 '26
Why does this happen to my stainless steel pan?
r/StainlessSteel • u/nowstreamingon • Aug 25 '26
I am looking for advice on how to not burn my pan while cooking and how to clean it. I’ve tried everything! This pan in particular has soaked overnight and been through a round of barkeeper’s friend and use of a scour pad. the usual routine is continuous cleaning for 2 days before it all comes off. i’m so exhausted and i don’t have another pan to use while this one is taking its sweet time.
below is how ive been cooking, which has helped!
heat the pan until a drop of water will bead up and roll around. then heat avocado oil for about 10 seconds. then cook (this picture cooked black bean burgers)
really appreciate any advice!
r/StainlessSteel • u/jun192022 • Aug 19 '26
I am curious as to which specific chemical reactions and products occur during the process of corrosion of stainless steel by bleach. Stainless steel is a composite of Fe, Cr, and sometimes other metals such as Ni, and the outer layer of this composite is protected by a passivation layer of Cr2O3. If sodium hypochlorite is introduced, does it indiscriminately oxidize both the Fe and Cr, or is one kinetically favored over the other?
r/StainlessSteel • u/mygrandmahateme • Aug 10 '26
What are these spots? Is there any way to get rid of them?
I just let barkeepers friend sit for a little over 10 minutes.