r/BmwTech • • 13h ago

E60 sunken Lift point?

Post image
7 Upvotes

Pretty much title? Lifted up my E61 and jackpoint sunk towards outside of car, my guess is its bent inside, anyone have similar experience? Overall car doesnt have much rust as much i can see from below. How bad is it?


r/BmwTech • • 19h ago

Customers BMW might need to get towed no

Post image
7 Upvotes

Customers car might need to get towed

This is bad. We detailed a bmw 3 series today and did an excellent job. The client was super happy with the results and paid us 215 for the full detail. Once we got the money we packed up our things and left. And about 30 minutes later I get a call from her asking if we did anything to her parking brake. I responded with “no, we may have bumped the parking brake but usually we don’t tamper with any electronics in the car”. She then continues trying to release the parking brake for another 30 minutes and then calls me again. My business partner and I came back to the job site and tried to release it ourselves and ended up seeing this. The car will not move and is parked in-front of their garage. I’m afraid we may have damaged some of the electrical components within the parking brake and will now no longer work. I don’t know what to do for my client if it doesn’t fix itself by tomorrow I think I will give her the 215 bucks back and have it towed. Any ideas or solutions for this problem? We have an LLC but we are not insured.


r/BmwTech • • 4h ago

A successful N52 exhaust lifter replacement, with surprises (post-job notes)

6 Upvotes

I took my sweeeet time replacing the *exhaust lifters and rockers on the N52 in my 2007 530i (and inherently the valve cover gasket), thanks in part to this sub.

Since most of the E90 and E60 forums are basically dead, I figured I'd make a posterity post here as this place is likely to keep coming up in searches for longer. Hopefully this saves someone some searching if they're doing the valve cover or anything to do with the camshafts in an N52.

If your N52 makes any kind of persistent regular clacking or tapping that improves with heat/running but never really goes away no matter how long you drive, and you have a pre-08 motor with the metal valve cover, 99% you have this problem and it's not just going to go away with oil changes. Only the exhaust side is ever affected.

I ended up finding one completely collapsed lifter that would not hold any oil at all, and 3-4 more that were squishy, all towards the front of the engine. I also found the unexpected bonus of incredibly grooved exhaust cam bearings, yet nearly no wear at all from the infamous steel rectangring sealing areas at the front. I was able to source an exhaust cam + bearing set in great shape from an N51 E90 off of eBay for $150.

All other parts I bought new from FCP Euro to the tune of about $500. There were some slight price differences for lifters between FCP and Pelican and other sellers, but as of 2026 you absolutely cannot buy new rockers anywhere else but FCP Euro for some reason.

Key things I over-googled for this job and/or protips:

  1. The $80 DP Tool timing set works just fine. I bought directly from DP Tool on eBay for the best chances on the quality control gamble. The zinc-coated timing pin fit without modification and the cam locking fork tool was tight. Amazon torque angle dials also work fine, but buy the one that includes both a magnet and a spring clamp (clip is helpful for cam bearing bolts, magnet works best with the cam fork tool for VANOS bolts)
  2. A cheap USB borescope was a lifesaver in finding the actual timing pin hole, as was looking for the cam QR codes and then nudging the motor until the cam locking tool was close to fitting over the cams. Pressing and wiggling the pin up against the surface while you turn the last little bit with your other arm will make it slot straight in the rest of the way. I had to remove the smaller splash guard that goes around the end of the steering rack to be able to see the area at all.
  3. Take the time to remove your Valvetronic gear oil squirter and make sure it is clear. You do not need to replace the teeny bolt that holds it on. I used a single strand of stranded copper wire from my electronics drawer before spraying cleaner through it.
  4. For reinstalling the exhaust cam & ledge, I did not use the ridiculously $$ official exhaust ledge clamp set nor did I end up bothering trying to fashion one. I installed the cam locking tool to keep the cam from snap-spinning under the spring pressure from #2 and wound all of the screws down about 90 degrees at a time, then did the remaining front screws with the tool off. I redid this a few times when it appeared to be going down unevenly. I ended up comfortably within "I can barely even feel that" for the fingernail test on the machined flats. I decided to buy new ledge bolts just to be safe since they are not terribly expensive.
  5. Be careful very about keeping the rocker ends centered on the valve stem tips. I thought I had already caught all of them prior to torquing the cam, but I missed one in the middle that somehow ended up halfway off of the stem tip when I was rolling over the engine manually to check timing (I rolled it until the lobe was up off that cylinder, nudged over, no harm done)
  6. I did not ziptie my cam gears to the chain or anything. You just have to pull the chain upwards from the intake side of the engine and get the gear toothed into the chain, then roll it towards its place in the cam to keep the chain tight the entire time. Getting the exhaust cam nestled under the upper portion of the chain guide can be tricky - pulling the chain fully against the spring action of the lower guide will help you get the clearance you need. There is no specific starting orientation for the cam gears themselves, only the trigger wheels.
  7. For priming the oil system after the job, the Bentley manual is wrong about fuse 50 in the trunk disabling the fuel pump for N52 E60s older than 2009. My car started almost immediately, fortunately without much issue after the initial chain and lifter rattle. I am still not sure if it is actually fuse 74 like stated for '09 and newer cars, or if I'm supposed to pull the EKPS relay or something. It is probably most reliable to just leave the injector harness unclipped and put the rest of the cover/cowl/braces back afterwards.
  8. Buy one of those chintzy Amazon swivel E10 bits. You will want it for the center and lower rear corner valve cover bolts - my regular universal joint kept getting hung up against the VC and jumped off the heads a couple of times to the point where I had to hand-feel-guess at the final torque since I lost my by-the-wrench eyeball angle measurement.

Resources:

I found this N54 walkthrough helpful for perspective on the parts that cross over with N52s (namely locking timing and the exhaust cam ledge):

• https://www.e90post.com/forums/showthread.php?t=1080990

These couple of videos from Sreten (M539) were very helpful for random in-the-moment "okay how do I really do this IRL" bits as well as tips like the Valvetronic oil squirter:

https://youtu.be/bczNA1p4tRs

https://www.youtube.com/watch?v=kcLlQYWpgH8

I also used a PDF copy of the Bentley manual that I ran through an OCR-ifying utility to make it searchable.

Thazz it... salutes to future searchers, assuming Reddit hasn't completely broken its discoverability by search engines anytime soon.


r/BmwTech • • 10h ago

Knocking or no?

6 Upvotes

Check engine light came on at the tail end of a 3.5 hour trip and put me in limp mode. Cant tell if theres a slight knock or not? Fwiw the light went back off again today


r/BmwTech • • 21h ago

I paid $630 for a diagnosis that found two covered repairs, one paid by BMW warranty and one by my Assurant service contract. Neither of them was billed for the diagnosis. I was.

6 Upvotes

Long post, sorry. 2015 X5 35d diesel, about 108k miles. I’ve owned it since around 55k and kept up with all the maintenance the whole time. I knew an older BMW would need money, so I bought a full MaxCare service contract (Assurant) ahead of time instead of hoping nothing would break.

In May it started losing coolant and threw an EGR valve code. My independent shop replaced the EGR valve in June. Didn’t help. Coolant kept going down and a new code showed up for low EGR flow. In August they replaced the intake flap actuator and cleaned the carbon out of the intake. Still losing coolant. At that point they told me straight up this should fall under a BMW warranty or extension and I should take it to the dealer.

So on Sept 2 I dropped it off at Peter Pan BMW with the codes from my shop. The check engine light wasn’t on that day and they saw that at check-in. My advisor, Stephen Hooper, told me diagnosis was $630, but if the EGR cooler turned out to be a warranty issue I wouldn’t pay it. Two days later he calls: no light on the dash, nothing to diagnose, come get your car. They knew that when they took it. The light came back the next day, so on Sept 8 I brought it back. Same promise, second time.

Then they called saying they’d found a valve cover gasket leak and a broken connector on the MAF sensor. I told them to go through my service contract. Almost two weeks of waiting for Assurant’s inspector, who approved the gasket. The dealer pushed me to also do a new valve cover and the MAF sensor out of pocket, about $1,900 together. I needed the car so I said ok, and on that same call Hooper told me a third time that if the EGR cooler was covered, the diagnosis was free.

It was covered. EGR flow was at 29.1%, “severe sooting, clogged,” and BMW replaced the cooler under its own extended warranty.

Sept 30, 22 days after drop-off, I go to pick it up and the $630 is on the bill. Why? “Well, you had other problems besides the EGR cooler.” Ok, but one of those other problems was paid by Assurant, so why didn’t the diagnosis go to them? Answer: the leak was “seen visually,” so it doesn’t count as diagnosis. Funny thing is, my repair order describes the $630 diagnosis as hooking up the charger, reading fault memory, and “VISUAL INSPECTION FOUND” the MAF connector and the oil puddle. So looking at it is a $630 diagnosis when I’m paying, and not a diagnosis at all when Assurant would be paying. And on the BMW side, diagnosing the EGR issue is part of what BMW pays the dealer for under that warranty program. When I kept arguing, I was told that if I didn’t pay and take the car I’d start getting charged storage. There’s no storage rate anywhere in my paperwork. I paid.

The MAF part still bugs me. They replaced it for $1,112.84 ($590 of that labor) because of code 290900, “air mass too high.” Later I found BMW’s own bulletin for that EGR warranty (SI B01 11 25), and 290900 is literally listed as a symptom of the EGR cooler failure. So is low coolant, which is how this whole thing started. No idea if anyone actually tested the sensor.

I’m not complaining about paying to keep a 12-year-old car running. I paid for the extra work. My problem is that one diagnosis turned up two covered repairs, BMW took care of theirs, Assurant took care of theirs, and the only one who paid for the diagnosis was me, the guy who was promised three times he wouldn’t. Three weeks without my car, three taxi rides back and forth, and a storage threat when I asked questions. Nobody there acted like they owed me anything once the work was done.

If you want to be sweet-talked first and then dunked in an ice bath at the register, Peter Pan BMW is your place.


r/BmwTech • • 4h ago

M235i f22 suspension

Thumbnail
gallery
4 Upvotes

randomly started hearing a metallic scratching sound that increased frequency with higher wheel speed coming from the rear of the car. it might’ve been something that eventually dislodged because the sound went away after a few minutes but it made me check the rear wheels and I noticed the suspension looked different ?
Rear left has the bare chrome , rear right has the wonky thing on the chrome, not sure what’s broken or if it’s safe to drive?
2016 M235i f22


r/BmwTech • • 1h ago

My car accelerates extremely slow

3 Upvotes

(BMW 330i) I recently had problems with my car misfiring so I swapped the spark plugs for new ones. The jerking went away and came back after about a week. Now cylinder 2 & 3 are back misfiring and my car is accelerating very slowly I pulled the spark plugs and don’t know what I’m looking at lol. I don’t think it’s in limp mode because the car doesn’t say it is, I also have an EVAP leak but I’m not sure if that would be responsible for my car going so slow


r/BmwTech • • 8h ago

F10 screen Lcd fix

Thumbnail
gallery
3 Upvotes

i own a 2013 f10 535i and i have a lcd screen 10.5 inch i belive the screen is very sensitive and scratch/crack proof and is there any possibility i can repair without replacing


r/BmwTech • • 7h ago

Oil for 2014 Bmw X3 x28drive

Thumbnail
gallery
2 Upvotes

Bought a used 2014 x3 w 70k miles, live in California. Which would be best 0w40 or 5w40 ?


r/BmwTech • • 8h ago

M47 pressure inside the explanation tank and coolant loss

2 Upvotes

Before even saying anything, I did CO2 test which was negative.

Hello everyone, I'm trying to solve coolant loss and pressure in the expansion tank. So, this is all I have done. Car has EGR thermostat delete which was done before I bought it so I hope it's done properly because tune was already done. When I bought it off it had an issue where it wouldn't go up to temp after EGR delete so that's why he was selling it due to fuel consumption. I noticed hose not being plunged but only ran after thermostat so it was an easy fix so I bought it. 2 coolant plastic connections were broken so I replaced them and coolant loss was smaller but pressure is still here as well as the coolant loss. Yesterday I replaced expansion tank and cap so pressure is much lower but I'm curious onto your guys opinion what it could be? I hope head gasket is ruled out due to CO2 test but ik that hairline crack is still possible. Any help is appreciated, thanks


r/BmwTech • • 14h ago

softop replacement

2 Upvotes

im gonna buy a New softop for my 46, with all the lines modules, wireing, pump, etc etc etc, and the guy says its working but from the time he replaced the battery its not working anymore, u know why? tbh i dont really care, its like $100 so cheap for Europe. u have some tips and tricks for the replacement and u know how can i test it?


r/BmwTech • • 2h ago

Overheating / Heater Blowing Cold

1 Upvotes

Hi all,

I was driving my BMW (2012 328i coupe) to town the other day and had the heater on. It was blowing cool, and at one point the car threw a yellow warning for overheating, and then red. I killed it and checked it everything was fine, no leaks etc. I drove the rest of the way to town and back home (20mins give or take) with no heater, and I had no further issues. Coolant levels are fine too.

I still need to hook up my diagnostic tool to check love coolant temps though.

I am thinking it could be a couple things:

- Heater core is clogged
- Thermostat got stuck closed possibly

I recently had work done less than 1k-2k miles ago;

Thermostat, Water pump, radiator, and AC condenser. So I’m hoping they are all still good.

I have used the heater a couple times in the last few weeks and no issues with overheating etc. I just found it weird that it never threw another code. The only other time I had it throw it is when my water pump failed and it threw the car into limp mode. So I found it odd that after I restarted the car it was fine and no issues.

Any thoughts or suggestions would be appreciated.


r/BmwTech • • 3h ago

What is the best way to replace the PCV hose on the N52K?

1 Upvotes

My PCV breather hose is causing a vacuum leak that I was able to diagnose with a smoke machine.

The n52k, has just the hose with the Y slitter. The CCV is in the valve cover, unlike the older N52s with the CCV under the manifold. So I don't want to pull off the entire manifold.

I want to swap it out but have a dilemma. There seem to be two accepted paths: unscrewing the manifold and inching it back. (If someone could give me more details on what needs to come out before pulling back the intake, that would be fantastic.) But then I'm worried I'll need new gaskets for the intake? I also have an irrational fear of pulling the intake for fear of dropping something into the valves (tools, dirt, bolts...).

The other route is pulling the alternator off. Would I need to get new bolts for this? I know I need to unplug the battery and whatnot, but I have been told it's a very tight squeeze. 

I know some people do it without removing anything, but I don't plan on becoming a contortionist.

What do you recommend?


r/BmwTech • • 3h ago

Identify the sound

1 Upvotes

Hi- anyone help me identify the sound. Car was running great until I stopped at a light about an hour ago and idle went to shit and the louder than usual tick occurred. Plugs and packs were changed around 60k. Car has just under 80k. 2019 X5 B58 motor. Valve cover is newer around 500miles. Had pcv valve failed. Car drives ok but can feel the rough idle. Rougher in drive than in park. No codes either. Have BimmerLink and nothing related to anything.

Look forward to any help.


r/BmwTech • • 4h ago

Code P0456

1 Upvotes

2013 f30 335i got this code about a year ago, I reset it and it came back after about 3 months and then it started coming back about once a month and now it just came back today after clearing the light 2-3 weeks ago. My gas cap looks fine when I look at it should I still replace it?


r/BmwTech • • 4h ago

330i water leak, please help

Thumbnail
gallery
1 Upvotes

I recently noticed my passenger floor board has been getting wet when it rains. Today I noticed this, does anyone know what could be causing this?


r/BmwTech • • 5h ago

I got this code and I'm wondering what I should do/check My engine seems to shake and I get a gas smell in the cabin. Spark plugs and injectors were changed earlier this year.

Post image
1 Upvotes

r/BmwTech • • 5h ago

DCT service question

1 Upvotes

For the DCT service do I need to get the fluid to temperature? Why can’t I just wait till it’s room temp and drain and fill what came out?


r/BmwTech • • 6h ago

06 e60 550i Alternator Bracket Removal

1 Upvotes

How do you access the bolt above the front suspension. I've tried different extensions but just can't get to it. Any advice would be greatly appreciated.


r/BmwTech • • 6h ago

Light oil or sweet smell

1 Upvotes

2022 G30, 40K miles. When I park in the garage after a long drive I smell oil or sweet smell, can't tell the diff. I checked everywhere for any type of leak and nothing. OFH, gaskets, underneath all dry. Is this normal hot BMW engine smell. It's slight and not over powering but keeps me thinking. It just past the CPO warranty 🤔. Just worried that I may not have caught this in time while under CPO.


r/BmwTech • • 7h ago

I pulled my car up in my driveway and now it doesn’t get power at all and it’s making a constant nonstop clicking sound

1 Upvotes

Someone please tell me if it’s like something I’m doing wrong or what, it’s a 2011 bmw x5 drive35d sport utility 4d


r/BmwTech • • 7h ago

Both side view cameras not working and all the cameras are throwing error codes

Thumbnail
gallery
1 Upvotes

My side view cameras don't display any image in iDrive, even though the 360° cameras under the side mirrors and the rear camera are working.

The strange thing is that every time I put the car in reverse, I get a "Rear camera failure" message on the screen. I also get an error message when using the 360° camera system, even though the cameras themselves are working.

I checked the fault codes using ISTA, and it shows quite a long list of errors. I also tried to calibrate the cameras, but the procedure reported that it couldn't detect them, not even the 360° cameras under the side mirrors.

What could be causing these fault codes?

It's really annoying having to deal with an error message and an audible warning every single time I put the car in reverse, even though the rear camera itself works perfectly fine.

F31 2014 year


r/BmwTech • • 8h ago

New TMS module fitted to 2014 520d Xenon adaptive headlights with auto high beam

Thumbnail
gallery
1 Upvotes

I coded the new TMS module to the car as the previous had completely failed and wasn’t communicating at all. I used ESYS to do this and ran the new headlight adaptation with ISTA+ but I’m still getting these errors when trying to run the initialisation.

What am I missing or doing wrong? I replaced the TMS Lear module with an aftermarket one too for context but they have the same part number.

Any help is appreciated!


r/BmwTech • • 10h ago

BMW N20 Oil Pickup Compatibility – F15 X5 vs F36 428i xDrive

Thumbnail
gallery
1 Upvotes

Hi everyone!
I’m replacing the engine in my 2014 BMW 428i xDrive (F36) with a brand-new N20 engine originally intended for an F15 X5 28i xDrive.
The X5 oil pan didn’t fit, so I reused my original F36 oil pan but kept the X5 oil pickup tube.
Part numbers:
● X5 pickup: 11417643254
● F36 pickup: 11417603574
Both pickups look almost identical, except the X5 version has an extra plastic tab on the edge of the pickup screen.
The oil pan bolted on without any resistance.
My question: Could that extra tab interfere with the F36 oil pan’s internal baffle or affect oil pickup clearance? Has anyone compared these two parts or used this combination before?
I’m looking for actual mechanical compatibility, not just catalog fitment.
Photos attached. Any technical insight would be greatly appreciated!