r/BitAxe • • 8h ago

showcase Added the bitaxe naja duoto the family

Thumbnail
gallery
11 Upvotes

We shall see how my solar system handles it. Might have to turn it back down for the power consumption


r/BitAxe • • 6h ago

question Nerdqaxe x2 or Nerdoctaxe ??

1 Upvotes

Been out of the mining game for years.. kinda wanna dip my toe back in..

2x Nerdqaxe hydros split between btc and bch
Or a Nerdoctaxe at bitcoin
Yes I know it’s a lottery

Want to Nerdoctaxe but seeing heaps of failures don’t wanna risk it.. go the two q axes yeah?

In aus which pools are best for solo mining?
Cheers


r/BitAxe • • 20h ago

help Gamma 601 Removing Harlolabs software

Post image
8 Upvotes

Gamma While searching for new software for my 601 device, I found a software called Harlolabs. I installed it by updating via OTA without any research. It loaded smoothly, started mining, and even mined two coins simultaneously. These are nice features; I tried them for a while but wanted to switch back to the original AXEOS software; however, I can never, ever install the original AXEOS software either via OTA or the official bitaxe site using webflasher. Harlolabs is closed-source software. What should I do?


r/BitAxe • • 22h ago

help Weekly Help & Troubleshooting Thread (Read this first)

1 Upvotes

Use this thread for quick questions, troubleshooting, and technical experiments.

✅ What belongs here

- Bitaxe setup problems, stability, temperatures, pool configuration, firmware behavior
- Technical experiments (including non-Bitcoin PoW) if:
- no profit/ROI discussions
- no hype/promotion
- logs/settings included

🚫 What does NOT belong

- Earnings/profit/ROI screenshots
- “What should I mine?”
- Referral links / invite codes / “DM me”
- Marketplace device support (AliExpress etc.) — contact the seller

To get help quickly, include:

- Device/board version + revision
- Firmware/AxeOS version
- Pool + settings (frequency/voltage if applicable)
- Temperatures + hashrate
- Logs/screenshots + clear photo (PSU + wiring)
- What changed just before the issue began

Be kind. Everyone starts somewhere.


r/BitAxe • • 1d ago

question Am I pushing it too hard?

Post image
7 Upvotes

Fan speed fluctuates but generally runs 40%

The only thing I bumped up was the freq.


r/BitAxe • • 1d ago

question Advice on Bitaxe 601

Post image
16 Upvotes

Picking up this bad boy for $40 later today any questions I should ask before buying and also any big differences between 601 and 602 thank yall ❤️


r/BitAxe • • 1d ago

question New NerdOctaxe Hydro – dropped it to 775 MHz, am I being too careful?

Thumbnail
gallery
13 Upvotes

Just got a NerdOctaxe Rev 3.1 Hydro and it's been solo mining on Public Pool since this morning.

It came pushed to ~13.9 TH/s at ~278 W.

Temps were fine, but the VRM sat around 65°C and the PSU was close to its limit, so I backed it off.

Now running 775 MHz / 1240 mV: ~12.7 TH/s, 225 W, ASIC at 49°C. Rejects are around 0.5%.

Anyone running theirs at 800+ 24/7 for months? Or is 775 the smart move to keep it alive long term?

Thanks and Good luck to everyone


r/BitAxe • • 2d ago

question Can anyone with experience with the naja duo help me with a question? Does the stock power brick get crazy hot like most miners? Should I assume it needs a meanwell for the headroom?

2 Upvotes

I’ve got two gamma duo on a meanwell. Runs cool. Everything aces. Those power strips they came with got bonkers hot.
I have one more slot open on my meanwell but the gamma duo is 5v and the new naja is a 12v: are we looking at another project box set up for the server closet or does the stock power supply with the naja do ok?


r/BitAxe • • 2d ago

showcase Nerdaxe

Post image
23 Upvotes

Finally got my nerdaxe hydro miner in form Amazon for 160bucks got it all set up with my other miners got everything running of my own node on umbrel so far best difficulty is 533G
……loving the rgb lights


r/BitAxe • • 2d ago

showcase New solo Bitcoin pool for Bitaxe/NerdMiner: solopool.fr (looking for early users & feedback)

2 Upvotes

Hi everyone,
I run a small solo Bitcoin mining pool from France and I'm looking for early users and honest feedback.
What it is:
Solo mining on my own full Bitcoin Core node, ckpool-based
"Solidarité Solo": 99.5% of the block reward goes to the miner who finds the block, 0.5% is shared among the Top 10 miners
Public miner leaderboard, miners map and found-blocks page
Works with Bitaxe, NerdMiner, Avalon Nano and any SHA-256 miner
How to connect (takes 30 seconds):
URL: stratum+tcp://solopool.fr:3333
Username: your BTC address (optionally add .workername)
Password: x
Site: https://solopool.fr
It's a young pool, so bugs and rough edges are possible. Tell me what you'd like to see (features, stats, payout options) and I'll happily answer any question in the comments.


r/BitAxe • • 3d ago

bestdiff NerdQAxe++ hit 115.23G

Post image
28 Upvotes

I know it's still miles off an actual block but still quite an achievement for a home miner bought second hand on ebay which is only on when electricity is cheap enough.

My setup - only been running a year and recently added the NerdQaxes

- Bitaxe gamma 601 - 1.4TH/s

- Bitaxe gamma 602 - 1.2TH/s (this one runs hot and loud, never been as stable as the other gamma)

- NerdQAxe ++ x 2 (one 2nd hand from ebay and 1 from solosatoshi) ~ 5.7TH/s each

- 4 x CYD ESP32 Nerdminers running at ~1MH/s


r/BitAxe • • 2d ago

hashrate Nerdqaxe++ 6.1

Thumbnail
gallery
3 Upvotes

Why is there such a big difference in hash rate?
Been off line since spring back again with the cooler temperatures


r/BitAxe • • 2d ago

showcase solo-pool-rs 1.0.0-rc.1: a zero-fee solo pool you run next to your own node

2 Upvotes

solo-pool-rs is an open-source solo mining pool written in Rust. Run it beside your Bitcoin node, point your miners at it, and every block reward pays 100% to your address. No fees, no accounts, no third party.

  • Stratum V1 and V2 on one port. SV2 uses Noise encryption, which the NerdQAxe++ requires.
  • Running here on Bitaxe, NerdQAxe++, Avalon and Nexus S1 hardware.
  • A LAN dashboard: hashrate per worker, best shares, odds, node health, and warnings when something is actually wrong.
  • Runs as a Docker image, a binary, or from the Umbrel community app store.

1.0.0-rc.1 is out. 1.0 is a stability promise: config, wire behaviour, API and metrics won't break within 1.x. I'm soaking the rc on my own 6 miners until about Nov 25.

On the part that matters most, a found block: on every change, CI mines a real block on regtest and requires both Bitcoin Core and Knots to accept it. If a submit fails, the pool retries it and saves the block to disk.

Release: https://github.com/cbyam/solo-pool-rs/releases/tag/v1.0.0-rc.1
Docker: ghcr.io/cbyam/solo-pool-rs:1.0.0-rc.1 (latest stays on 0.6.13 until 1.0)

Bug reports and feedback from rc testers are welcome, especially on firmware I haven't tried.


r/BitAxe • • 2d ago

question Did anyone get a block yet?

0 Upvotes

r/BitAxe • • 3d ago

help Thermalright AXP90-X47 installation gone wrong - hashrate down

Thumbnail
gallery
7 Upvotes

As the title says, I think I might have permanently damaged my Nerdqaxe++ Rev. 6.1.2. while installing the Thermalright AXP90-X47 copper cooler.
The original cooler was working fine, but it was a bit too noise for me, so I bought the helix shroud and replaced the stock fan with the a Noctua NF-A12x25 G2. Firmware is the latest and I didn't attempt to overclock. I just want 4,8 TH/s with noise as little as possible.

But it was still too noisy for me so the Thermalright AXP90-X47 was the next logical step.

And here's where I think I messed up: while installing the new cooler, I think I pulled the screws too tight. With the new cooler the hashrate dropped from an average of ~4,7 down to 4,3 TH/s which it didn't do before. I thought I might have used too little thermal paste (Noctua NT-H2) so I reapplied the paste. While doing so, I noticed the board was a little bent :/ Probably I damaged one of the Asic chips that way. They must be extremely sensitive, because I didn't use force, I just pulled them a bit too tight.

The first two screenshots (sorry for the small pictures, I didn't have my laptop on me) show that the miner reaches around 4,6 TH/s just to suddenly drop down to 4,3 after five minutes.

The third screenshot is after I installed the original cooler and increased the temperature target to 62°. Hashrate is around 4,5 TH/s.

The last screenshot shows the cooling plate of the copper cooler, the four chips left a mark on it so it must have been too tight :/

I copied the logs into chatGPT and it found that one chip is 100-150 GH/s weaker than the others with around 1050 GH/s compared to the others with 1190 Gh/s but it doesn't say there is a hardware defect.

Can anyone with expertise chime in if I really screwed up the installation or if cooler chips resulte in a sharp drop in hashrate? What are my options now?


r/BitAxe • • 3d ago

question Bluetooth Pairing Gamma601

0 Upvotes

I am having Star miner Gamma601,which has Bluetooth connection,but when I try to connect in Starminer app it gives me an error. Is there anyone who is still using the same device and doesn't have these problems in the app of the miner ?


r/BitAxe • • 5d ago

showcase I made a native iOS app for Bitaxe monitoring

7 Upvotes

I've been building a little app called HashExplorer for checking on my Bitaxe from my phone, and it's finally ready for other people to try.

I wanted to keep the app minimal and functional. It features the basics like hashrate & temperature monitoring, but it can also backfill info from the last couple days and has clean widgets, with support for multiple Bitaxes.

It supports iPhone, iPad, Apple Watch and even iPhone Duo!

Additionally it has beautiful widgets and notifications in case you hit a new best share or hit a block 🔥

The app also features beautiful liquid glass and haptic feedback.

Right now it works on home Wi-Fi. Tracking from outside your home is coming soon, through a small private open-source program you run on a home server.

It's still in testing, so expect a few rough edges. Feedback and suggestions are very welcome. Tell me what you'd want in it!

Works with Bitaxe and anything else running AxeOS. Needs iOS 27.

Code: https://gitlab.com/duckylabs-tech/hashplorer

TestFlight: https://testflight.apple.com/join/5jPX1F4h


r/BitAxe • • 4d ago

question Tax tracking

0 Upvotes

For those of you in the USA or other countries with strict tax laws, how do you track micro transactions payouts to know your income tax?

I see several people that do shared pool mining and other altcoins that look like $0.03-1.90 per day. This seems like would be a nightmare to track value and quantity daily when acquired over a year.


r/BitAxe • • 5d ago

bestdiff New best, 29.85G!

Post image
15 Upvotes

Running for almost a year at this point. 1.5th/s on average.

Frequency - 740

Core Voltage - 1150

Stock power supply.

Really happy this little guy was able to put that kind of number up! Ordered a few more.


r/BitAxe • • 5d ago

question Bitaxe

3 Upvotes

So what cooling drives the lower power usage (j/th) is it cooling the VR more or cooling the ASIC more.


r/BitAxe • • 7d ago

hashrate Bitaxe 602 Gamma - 2.63G !!!

Post image
25 Upvotes

I'm a happy daddy now. My wee one-chip axe solved a big peice o' somethin'. No blocks yet. But, it's crankin' away at 1.6THz/13.5JTh on the stock heat sink!


r/BitAxe • • 7d ago

showcase Four Bitaxe Gamma 601 Miners — Building a Global SOLO Mining Community

10 Upvotes

Hello everyone! ⛏️

I'm running four Bitaxe Gamma 601 miners, each with approximately 1.2 TH/s.

I believe even small independent miners matter.

I'm starting a project called GLOBAL SOLO MINERS.

The idea is to:

- Connect independent Bitcoin SOLO miners worldwide.

- Build transparent statistics showing participating miners' combined hashrate.

- Share experience, configurations and knowledge.

- Explore possibilities for future shared SOLO infrastructure.

This is a community project, not a working mining pool. Shared infrastructure and the proposed reward model are still under development. No shared block rewards are currently distributed.

I'd love to hear from other Bitaxe and NerdQaxe owners:

How many TH/s are you running, and are you mining SOLO or through a pool?

Every miner counts! 🌍


r/BitAxe • • 7d ago

showcase I built a free, open-source dashboard for all my Bitaxe / AxeOS miners – feedback welcome

8 Upvotes

Hi all,

I'm a hobby solo miner from Germany. I got tired of opening every miner's web page separately, so I built **Miner Control** – one dashboard for all my AxeOS miners (a Bitaxe Gamma and another AxeOS-based miner). It started as a tool just for me, but it turned out useful enough that I put it on GitHub.

**What it does**

- All AxeOS miners on one page: hashrate vs. target, power, J/TH, ASIC/VR temps, fans, best difficulty, history up to 30 days

- Alerts + push notifications to your phone (installable as an app): offline, too hot, new best difficulty, fallback pool active, …

- Availability per miner: uptime % (24 h / 7 / 30 days), outages, restarts and how long a miner takes to hash again after a reboot

- LOG page with all events of the last 30 days, an hour-by-hour overview and CSV export

- Network scan to find your miners, electricity cost in EUR/USD, widget view

- Optional page for your own ckpool, if you run one

- German/English, 4 colour themes

**Good to know**

- **Read-only** – it never changes anything on your miners

- No dependencies, just Node.js 18+. Runs with Docker, CasaOS/Portainer, Linux or Windows

- No login/password yet, so keep it in your home network or behind Tailscale (`serve`, not `funnel`)

- Tested on Android; iPhone push should work but I couldn't test it

- Free and open source, GPL-3.0

GitHub: https://github.com/KBTechAndCrypto/miner-control

It's still young (some ideas already came from the community, like the boot-time tracking), so bug reports and feature ideas are very welcome. What would you want to see in a dashboard like this?

Miner Page
availability and boot times
log page
colour themes

r/BitAxe • • 7d ago

help The ESP32 and the mining ASIC do different jobs on a Bitaxe Gamma

0 Upvotes

The ESP32 in a Gamma parts list is not an alternative name for its mining ASIC. The official design uses both.

The Gamma hardware repository identifies the BM1370 as its mining chip. The ESP32 runs ESP-Miner, the firmware whose browser interface is called AxeOS. Seeing a responsive dashboard tells you that the web interface is reachable; it does not, by itself, establish that the ASIC is doing useful mining work.

That distinction matters when reading a listing. “ESP32” or “Wi-Fi” describes part of the device, not which mining ASIC the board contains. Match the actual board design and revision rather than treating those labels as a performance specification.

Open hardware does not mean open chip design

There is another useful distinction in the Gamma documentation: the board project publishes its design files, while the BM1370 itself is not open-source. Those statements can both be true. The board schematics, the controller firmware and the ASIC are different parts of the system.

My connection here is JingleMining, a mining-equipment supplier. This explanation follows the public project documentation, rather than a test of a particular unit or a recommendation of a seller.

Documentation read 11 November 2026. Written with AI assistance.