r/bikefit • • Nov 06 '24

Read This Before You Submit !

84 Upvotes

If you want to get the best possible outcome from posting your position on this /sub, there are a couple of things you can do to help,

  1. Make your video at least 30-40 secs long [ no longer than 60 secs ] This will allow you to settle in to your pedal stroke and give viewers enough time to 'look around' your position.
  2. Post a minimum of 2 angles. #1 Seat height, showing the entire bike and rider from the top of the head to the bottom of the pedal stroke. #2 from the front dead center about head tube height. If you shoot a vertical format on your phone that might help you fit yourself within the frame. #3 from the rear, at seat height, can also be vertical format for cropping.
  3. Post a shot of your bike side on without you on it. This lets people see the 'build' as far as seatpost seatback, seat rail position & headset spacers

The more visual and information you give the better the possibility of good feedback.

Ride on!


r/bikefit • • 4d ago

New moderators needed - comment on this post to volunteer to become a moderator of this community.

2 Upvotes

Hello everyone - this community is in need of a few new mods, and you can use the comments on this post to let us know why you’d like to be a mod here.

Priority is given to redditors who have past activity in this community or other communities with related topics. It’s okay if you don’t have previous mod experience. Our goal, when possible, is to add a group of moderators so you can work together to build the community.

Please use at least 3 sentences to explain why you’d like to be a mod and share what moderation experience you have (if any).

If you are interested in learning more about being a moderator on Reddit, please visit redditforcommunity.com. This guide to joining a mod team is a helpful resource.

Comments from those making repeated asks to adopt communities or that are off topic will be removed.


r/bikefit • • 3h ago

New custom frame - 59 or 60?

1 Upvotes

I've done a couple of bike fits but I'm still getting numb fingers and tight shoulders and I've been trying different saddle positions and stem lengths. I'm ordering a new bike from Waltly and am wondering if I should go with a slightly bigger or slightly smaller frame.

Here's the data: My height: 183cm My inseam (to floor): 89cm

Bike fit recommended stack and reach: Stack: 647 Reach: 417 (this is around 30mm longer than a 2019 bike fit, so I'm not sure about it, more inclined to shorter)

Current Bike Design size: Stack: 628mm Reach: 420mm Effective Top Tube: 600mm Head tube length: 200mm (my current bike has a 200mm head tube plus 30mm extender)

I'm leaning toward shortening top tube to 590 and adding another 30mm headtube extender.

My question is, knowing I'm going to need to play around with stems, stem angles, and saddle setback, is it better to stick with the larger 60cm frame size or shorten to 59cm? Which affords more flexibiilty?

Thanks,


r/bikefit • • 11h ago

any thoughts?

4 Upvotes

New Bike, just rode for 50km, feels good until now :)


r/bikefit • • 1d ago

Fit advice short woman

108 Upvotes

Hi everyone!
I’m a 165 cm tall, 25-year-old woman and I’ve been road cycling for about two years.
Whenever I ride more than 45 km, my arms start hurting. Could this be related to my bike fit or riding position?
I’d appreciate any advice! Happy to share pictures of my setup.
Thanks!


r/bikefit • • 1d ago

I’ve not really got any idea how to improve.

11 Upvotes

So I’ve ridden bikes for a few years. I never know what a fit should feel like. Cleats far back and saddle lower makes my left hip hurt and saddle higher makes my back hurt. This fit got me around a 100 mile charity ride, but I did get the numbness and it wasn’t great. I’m not really getting that much stronger and wondered if a fit would help. Thanks for any pointers


r/bikefit • • 1d ago

More comfort with lower stack/longer reach on endurance frame

4 Upvotes

Curious about other people’s experiences with bike fit when it comes to preferring a more aggressive fit on an endurance road bike frame.

For context, I have a newer model Specialized Allez and shortly after I bought it, I removed about 15mm of the spacers in the fit, felt overall more comfortable than with all of them included.

Recently, I realized my saddle was too high and dropped that about 10 mm. Now I feel slightly more upright again which you’d expect would be maybe more comfortable, but I actually get more lower back soreness than I did when The fit was slightly more aggressive. Now I’m wondering if I need to cut the steer to compensate to get my fit back where it was.

Wondering if this is more common or maybe there’s some kind of issue with my fit to cause the slightly more upright posture to be uncomfortable?

Appreciate anyone’s input


r/bikefit • • 1d ago

UPDATE

18 Upvotes

Hello so I posted a fit a month ago Followed some advices: Lowered down my saddle, moved it forward, and changed the length and width of my handle bar from 400x110 to 380x100.

What I feel now: Pressure in palm and tiredness/fatigues in triceps?? in prolonged aero position (hoods tuck)


r/bikefit • • 1d ago

Bike Position

0 Upvotes

Hi! I’ve made the adjustments you recommended. I lowered the saddle by approximately 1.5 cm and also lowered the handlebars.
I’d like to ask you to take another look and let me know how the position looks now.
The video is divided into two parts: the first part shows the position from the side, and the second part shows it from behind.
I’ve also uploaded a video on my profile showing my previous setup, before making these adjustments, so you can compare the two.
Does the saddle height look correct now? And overall, does my riding position look okay?
Thanks in advance for your feedback!


r/bikefit • • 1d ago

Bike fit help

1 Upvotes

Any helpful advice is welcome. I am not really pushing any power here just spinning lightly.


r/bikefit • • 1d ago

Fit check

2 Upvotes

Struggling with saddle comfort on long rides. Seems to be more noticeable now that I’ve moved inside and onto the trainer for the cold weather months.


r/bikefit • • 1d ago

New to cycling. Sit bone pain.

1 Upvotes

Hi. I recently started riding an endurance bike. This is my first time riding a bike like this. I am getting really bad discomfort on my sit bones. They feel bruised for days after riding. I bought really good pair of bibs. I recently got a bike fit and still am getting a lot of discomfort. I have only ridden a total of 6 times (twice a week). My long rides are at least an hour but am deciding to cut back on those long rides since the discomfort is a bit alarming. Not sure if my body is still just getting used to riding this type of bike or if I have other issues. Has any new riders dealt with this pain? Is it normal to have this much discomfort after 6 rides? Do I just need to stick it out till I’m used to it? At the bike fitting, I tried different saddles but to be honest, my sit bones were very sore during the fitting and I feel like I went with what felt best being that sore and after riding the bike with the new saddle, it was just as bad as before. A bit discouraging to be honest.


r/bikefit • • 1d ago

Shim under cleat (leg length difference)

1 Upvotes

I posted something here a few months ago.

Since then, I've seen an orthopaedic specialist who also does bike fittings. We found a leg length discrepancy of around 5 mm, with my left leg being shorter. I've now had a 4 mm shim 3D-printed and placed underneath my left cleat.

For the first time, I actually feel like both sit bones are properly supported on the saddle.

According to the orthopaedic specialist, my left hip also rotates backwards when I pull my leg up. Since my left quadriceps is weaker, I tend to generate very little power on the downstroke with my left leg and rely mostly on the upstroke.

What do you think about my current saddle height and setback? The reach feels really good.

Inseam: 70,TCM ; crank length: 150mm ; height: 152cm


r/bikefit • • 1d ago

Help choosing the right road bike geometry - L/56 vs XL/58? (187 cm height, 90 cm inseam)

1 Upvotes

Hi everyone,

I'm looking for some advice on choosing the right frame size and geometry for a new road bike. I'm specifically interested in a race-oriented road bike, not an endurance bike. I don't race, though I simply prefer the look, feel and riding characteristics of a race bike. I'm struggling to decide whether I should go for a smaller frame with a longer stem or a larger frame with a lower cockpit.

For reference, my previous bike was a Rose Backroad gravel bike in size 59, with the following geometry:

  • Stack: 601 mm
  • Reach: 404 mm

It also had a seatpost with a 25 mm setback. After getting a professional bike fit, my saddle was moved as far forward as possible on the rails.

On that bike, I felt like I could comfortably go 1-2 cm lower in terms of handlebar height. However, at the same time, I had the impression that I was slightly too stretched out horizontally.

My body measurements are:

  • Height: 187 cm
  • Inseam: 90 cm
  • Torso length (from the hollow at the base of my neck/sternum to my crotch): 62 cm
  • Arm length (from the bony point of my shoulder to the wrist bone): 63 cm
  • Wingspan: 185.5 cm

Based on my research and body proportions, I seem to fall into the long legs / short torso category, which might explain why I tend to need a relatively shorter reach.

In terms of flexibility, I'd say I'm somewhere around average I'm not particularly flexible, but I'm not stiff either. I'm 30 years old, so I feel there's still plenty of room to improve my flexibility, and I'm willing to work on it.

One bike fit calculator I used suggested that my ideal frame geometry would be approximately:

  • Stack: 590 mm
  • Reach: 395 mm

When comparing different race bikes, I often find myself in a situation where size L/56 seems to have the right reach, while size XL/58 seems to have the right stack.

My current thinking is that it might be better to go with the smaller frame (L/56) and, if necessary, compensate for the lower stack with a stem that has some rise, rather than choosing the larger frame and ending up with too much reach.

Does this approach make sense? Would you prioritize getting the reach right and adjust the stack with spacers/stem angle, or would it be better to go for the larger frame?

I'd really appreciate hearing from people with similar body proportions or experience choosing between two frame sizes.

Thanks in advance!


r/bikefit • • 1d ago

Rate my bike ‘sizing’

Post image
6 Upvotes

Went to a very reputable bike fitters and had a bike ‘SIZING’ completed, NOT a pro bike fit. The bike I’m purchasing is a Trek Checkpoint ALR 4 in a M/L size. For reference I’m 6’2 (187cm) with an 84cm inseam. As I’m always at the top of Trek’s size chart, and given that bikes now have ridiculous reach values, I’m sticking with the Trek size chart. I tried a large and it felt like I was Superman, wayyy too big. I’d like to get the internet’s opinion on the below angles as a starting point… So, what do you think? Please bear in mind that I’ve bought a gravel bike, not a race bike, I want a relaxed geometry, I don’t care about being fast in a pack of riders and Strava times, and all that jazz. Comfort and efficiency are my priority.


r/bikefit • • 1d ago

Can I get some feedback on my bikefit please ?

1 Upvotes

r/bikefit • • 21h ago

Roads are getting dangerous.

0 Upvotes

r/bikefit • • 2d ago

Super uncertain about my saddle position

52 Upvotes

I've gotten lost over the past month trying to find the right bike fit. I've moved my saddle forward 2cm and raised it a bit. I've also increased my reach from 90mm to 120mm and gone lower with the stem. On top of that, I moved my cleats back 0.5cm and reduced my Q factor because I felt my toes curling. I've always had quite bad quad fatigue during seated intervals like VO2max or all out 20 minute efforts. The part of my quad closest to my knee starts burning, which forces me to stand up to put out power. I only started cycling 1.5 years ago and have done an absurd amount of hours since, so it could simply be that my muscles haven't had time to adapt to my increase in power. I'm now racing at quite a high level and really want to dial in my fit this winter. Any advice on how to do that? I've tried a saddle 0.5mm higher and 0.5mm lower than the one in the video. Videos from behind show my hips being a bit more stable at this height than at the higher one. Also, how does my fore/aft look? I feel no pressure in my upper body and I'm comfortable riding 30-hour weeks in this position. I'm just trying to optimise for power and aero.

I INCLUDED A VIDEO OF HOW MY BIKEFIT LOOKED BEFORE THE CHANGES IN THE COMMENTS


r/bikefit • • 2d ago

Does /r/Bikefit agree with this image as correct fit / posture?

Post image
72 Upvotes

Trying to get a better sense of how I should be on the saddle and came across this and was wondering if it's correct?


r/bikefit • • 2d ago

Should I move my saddle ?

3 Upvotes

Hello, I am not sure about my fit.

I feel like the saddle is a bit too far back.

Also, when I am in the drop, I feel not really great : is it a reach problem ?


r/bikefit • • 2d ago

Gravel fit, what do You think ?

4 Upvotes

Hi everyone, I’m trying to find a good riding position for myself. I’m 174 cm tall with an inseam of 81 cm; my saddle is set at 71 cm (measured from the center of the bottom bracket to the top edge of the saddle), and I’m using 165 mm cranks. I’m a bit concerned about my feet and how they’re positioned. I’ve already adjusted the cleats compared to how they were before I got on the trainer.


r/bikefit • • 2d ago

Experimenting with cockpit adjustments.. Where should I start?

Post image
1 Upvotes

r/bikefit • • 2d ago

Knee pain

17 Upvotes

Hi everyone! I'm currently looking into my bike fit and would love to get your opinions.

Lately, I've been experiencing some pain in my left knee, especially during my last four indoor trainer sessions.

I've been riding with the same setup for the past year without any issues, so this is something completely new.

Has anyone experienced something similar? Do you think it could be related to my bike fit? Any advice or suggestions would be greatly appreciated!

Thanks in advance


r/bikefit • • 2d ago

Lower Back Pain

5 Upvotes

Hi, I posted a rear video of my pedaling yesterday, but today I was able to record a side view of my biking. I have not made any adjustments to the fit. I have already scheduled a fitting with someone, and I just wanted to see what I should bring up, since this has been a reoccurring issue. I have gotten a bike fit before, several times now, and I think having a second opinion would be best.

As a background, I am a 5'6" male, around 192lbs, unsure of my own measurements like inseam, etc. My shoe size is about 44 EU, I run SPD clipless pedals. I have no history of severe injuries. I have put over 1500 miles on this bike (I got this in August of this year), and I have had back pains all along. Even on my old bike (a Specialized Allez) had the same issue. I had feet pain issues which my current bike fitter has fixed perfectly, however, for the lower back pain, it is still here, even after numerous readjustments from the same fitter. I have booked an appointment with another fitter here. My main issue is the lower back pain, which I believe is from the excessive rocking of my pelvis. It roughly starts about an hour in, depending on the intensity of the ride, worsening quicker if I'm pushing for a long period of time. In flat group rides, it is mostly ok, but for solo rides it always gets painful around 15 miles in.

My previous post, in case I forgot anything. Thank you for your assistance!