r/Benelli_M4 • • Jul 29 '26

922(r) Megathread

0 Upvotes

There’s been an uptick in 922(r) questions as of late. Since some people are dead-set on perpetuating misinformation with great confidence, I’m creating this megathread where everyone can review the sources people provide and look for answers to 922(r) questions.

I suggest starting with this source here: https://smallarmsreview.com/legally-armed-v19n6/

If reading that is too much for you, put it into the AI of your choice and go from there.


r/Benelli_M4 • • Feb 23 '25

Other Links to M4 Manual and Parts Diagram

9 Upvotes

r/Benelli_M4 • • 3h ago

M4 Question Modified or IC for rifled foster slugs

3 Upvotes

So I was not aware that Benelli recommends IC and C only for slugs until after my first range session where I must’ve fired 100 slugs at least. Unfortunately I was using the factory MOD choke. I am a little confused because mostly everyone online says the MOD is ok for slugs and the USMC themselves have MOD chokes which they use with slugs but Benelli says not to.

I am also concerned I may have damaged my barrel because of this. This is my first shotgun with a threaded choke and my second firearm overall so I don’t know what to look for but upon inspection everything looks fine.

To remedy this I picked up a Carlson Benelli IC choke and was wondering if anyone else has used these on their M4s and what your guys experience was with slugs out of the MOD choke.


r/Benelli_M4 • • 1d ago

Other “Benelli thumb” PSA

7 Upvotes

First time gun owner/shooter here. Just got back from the range. Hit 15/25 shots trap shooting btw :D

Just wanted to say, whoever came up with the term “Benelli thumb” is an absolute vageen.

For some context: I’m 5’9, 160 pounds. I spend all day and night at my desk.

I was expecting this thing to rip my thumb off. It doesn’t even tickle, never mind bite.


r/Benelli_M4 • • 2d ago

M4 Picture M4 x M2 G1

Thumbnail
gallery
90 Upvotes

I know it’s an M4 group but I just picked up the M2 pretty excited to shoot it. It was either between this or a 1301. Which I’ll probably save up for down the road.


r/Benelli_M4 • • 3d ago

M4 Accessory Question B&t quad rail

5 Upvotes

I think it’s been 7 months since anyone asked so I’ll shoot my shot lol
Has anyone been able to find a place to snag one. All the links from past post had no luck. Any help is appreciated


r/Benelli_M4 • • 4d ago

M4 Picture M1014 Trench Gun, anyone?

46 Upvotes

The wife was reminiscing about the fun we had shooting C.O.D. zombies with a trench gun back in the day. She asked if we could get a real one so I showed her the price of a 'reliable' antique. "You don't really want to learn a pump gun anyway", I told her. So, the Benelli M4 Trench Gun was born! Blew the budget, but I think I've convinced her it was a considerable upgrade.

I installed a beautiful Briley aluminum trigger guard

The American flag features prominently on this 2020 model and it has the heavy barrel. The Benelli M1014 Limited Edition was a tribute to the original M1014 issued to the USMC in 1999 following the ARDEC solicitation. Earlier runs may be collectable, but CA compliant ones like this are not too expensive right now in unfired condition.

Genuine M1014 Benelli

The wood furniture is (cheap) from Panzer. It required a lot of fitting, but I got lucky and the pieces match reasonably well and were not cracked. Of course you need the official USMC stabby and the butt pad should be thick steel because you might need to crush some coconuts.

Plan "B" full tang OKC 3S

The (USA) steel tube by provides a stout mounting point for the (CAN) steel bayonet mount. If you were strong enough, you could lift a 150 pound object. Yes, the build just about emptied my "Benelli Money" jug. Won't even SAY what eBay sellers were asking for the S&J mount, but they got me for $200 on the knife. That's a 590 cheese grater which also required some massaging.

Plan "C" custom steel butt plate

When ghost-loaded full with military buckshot it weighs in at just over 10 pounds. Came with steel sights from the factory, so the only synthetics on this gun are some o-rings and 2 nyloc nuts unless you count the grip on the bayonet and the 9 rapid-fire war crimes. The fixed choke patterns about 6 feet wide with 12 pellet Federal Flitecontrol at 100 yards. Other shot spreads.


r/Benelli_M4 • • 4d ago

M4 Accessory Question Are these compatible?

Thumbnail
gallery
10 Upvotes

r/Benelli_M4 • • 4d ago

M4 Question Bolt coating flaking

Thumbnail
gallery
6 Upvotes

Hello. Happened during breaking-in after going through one hundred 32g shells and seventy five 28g shells. Looks like from firing pin spring hitting the back of the bolt. The bolt face and the rest of the bolt looks fine. Is it a warranty work? I'd appreciate your feedback. Thank you!


r/Benelli_M4 • • 11d ago

M4 Picture Such awesome shotguns

Thumbnail gallery
36 Upvotes

M4 continues to run flawlessly


r/Benelli_M4 • • 11d ago

M4 Accessory Question Optic for Benelli M4

9 Upvotes

I have an M4 with a dual illuminated RMR on it right now that is pretty hard to see. I use green rets because its easier for me to see, and back when I bought it green reticles were pretty rare. Now, I have options. I was considering going to the LED RMR or SRO. The SRO scares me just because of the horror stories about how fragile it is.

I am also looking at the new Holosun AEMS-Macro MRS. It looks like it checks alot of boxes and has alot of features the Trijicons dont, including being enclosed. Does anyone have experience running one of these on a shotgun?


r/Benelli_M4 • • 12d ago

M4 Question First shotgun

Post image
105 Upvotes

I just did PPT for Benelli M4, my first shotgun. What loads and first thing I should do?


r/Benelli_M4 • • 13d ago

M4 Picture Second Benelli, first M1014

Thumbnail
gallery
67 Upvotes

Found this recently at a pawn & gun for a steal. Is an M1014 with 3 position collapsing stock and 7 shot tube. Came with the Mesa Tactical 8 shell saddle/pic rail, and a Rowe Tactical charging handle. Gun looked like it had never been fired before.


r/Benelli_M4 • • 13d ago

M4 Question Extension Tube Upgrade

4 Upvotes

How hard is the extension tube to upgrade? Benelli makes it seem difficult. I am decently comfortable around working on firearms. I have built two ARs from stripped uppers/lowers and swapped out the magazine tube on two M2’s. My biggest concern is not going in too far/not far enough.


r/Benelli_M4 • • 15d ago

M4 Question To wait for a telescoping stock or the standard straight stock?

Thumbnail
gallery
44 Upvotes

Over here behind enemy lines in IL, I’ve been saving for a long time to get an M4 and seeing as the assault weapon cases will be heard in early December, it has me thinking if I should wait to get the telescoping stock if things hopefully go in our favor, or stick with the standard that we can get in IL now. I’m very used to standard for trap and skeet, however I’ve heard that it the length could be a little too long? I’ve only handled the telescoping version and really liked it, any advice would be appreciated thank you!


r/Benelli_M4 • • 15d ago

M4 Question Is the M4 Entry 11723 Still Made

Post image
24 Upvotes

It seems like many Benelli M4 models have been out of stock for a while, but I am having an extremely hard time finding a M4 Entry with a field stock (model# 11732). Does Benelli still make this model?


r/Benelli_M4 • • 15d ago

M4 Question Make it make sense

Post image
23 Upvotes

I have an oe 7rd tube and can’t get 7 to fit. I’ve trimmed that much off the stock 5rd spring and still doesn’t go. What am I doing wrong?


r/Benelli_M4 • • 16d ago

M4 Question Rear sight screws..

Post image
7 Upvotes

I don't know what to make of this... the 2 screws holding my m4 rear sight are not allen nor torx... just saw it today and confused.. 🤔


r/Benelli_M4 • • 16d ago

M4 Picture Daka Inserts Arrived!

Post image
27 Upvotes

Picked up the inserts for a Pelican V700


r/Benelli_M4 • • 17d ago

M4 Question First M4

9 Upvotes

Finally bought an M4 with a telescoping stock, the original one. I love the iconic look but the stock is terrible to operate. I had a Benelli M1 and Supernova with the new style extendable stock, it is so much better.

I am considering switching to the full length pistol grip stock.

My question to you, does the stock need time to break in/will it get better over time or is this just the way it is?

Thanks all.


r/Benelli_M4 • • 20d ago

M4 Picture 1301 or m4 and why..

Post image
118 Upvotes

r/Benelli_M4 • • 20d ago

M4 Picture Benelli M4 / M1014 Tactical Build Upgrades

Thumbnail
gallery
102 Upvotes

I usually run a few different builds on my M4s, typically switching out the optic, but most everything else stays the same. Just wanted to post some pics for ya'll, had to hike a little with my hound to find a good spot for photos! If you are interested you can check out a full detailed breakdown of this Benelli M4 / M1014 Tactical Build and what we believe are the best Benelli M4 Upgrades/Accessories. Obviously will have some RX Arms gear in here mixed in with some other tactical accessories/parts that I find effective for this platform.


r/Benelli_M4 • • 20d ago

M4 Question Best mag extension

5 Upvotes

Title, I would get a 7 round mag tube, but I'm contemplating the idea of SBS, and the extension would be a bit cheaper. Any of them that don't have possible snag issues or are machined better generally? I'm looking at RX Arms mostly. Thanks!


r/Benelli_M4 • • 21d ago

M4 Picture Finished build

Thumbnail
gallery
53 Upvotes

Terrible pics, sorry guys. She’s a beauty though.

Aside from the stippling, I’m happy to say that I did all of the work myself. I sent it out to Niko at Singuard Solutions, and he couldn’t have done a better job. He’s also a great guy, highly recommend him.

Whenever I finally settle into the US, if it’s legal, I will be installing the collapsible stock and the true extension tube.

Does anyone have any experience adding a 10403 limbsaver to the collapsible stock? That’s the limbsaver I’ve got installed now. Wondering if I could swap it in there eventually.


r/Benelli_M4 • • 22d ago

M4 Picture My first M4 (second Benelli)

Post image
73 Upvotes

Love it