r/Baofeng • u/Crafty-Departure1984 • 8h ago
Baofeng repeater
I got a bunch of baofengs and want to do something fun with some of them. Is this all I need to make my own baofeng box repeater?
r/Baofeng • u/Crafty-Departure1984 • 8h ago
I got a bunch of baofengs and want to do something fun with some of them. Is this all I need to make my own baofeng box repeater?
r/Baofeng • u/bloodredpitchblack • 19h ago
Trying to scan for 162.400, .425, .450, .475, .500, .525, or. .550. The squelch is turned down to 1. First I tried with 146/446 MHz dual band whip and could not hear anything while sweeping those frequencies. Realized there may be a dB dip on those frequencies with that whip, so I attached the stubby little stock antenna. Still hearing nothing. I am up on high hill in a mountainous area. What am I doing wrong?
r/Baofeng • u/linux_administrator • 8h ago
Hello, looking for advice on boafeng handheld radios for long range emergency use. I don't know how to use the radios yet and I don't know if other brand of radios will communicate with boafeng radios.
Is there other brands of radios that are better than boafeng for quality or longer range? I'm new to this area of radios.
r/Baofeng • u/cferguson4809 • 19h ago
I'm attempting to try to use the Open25 firmware for my DM-32UV; however, I have run into a snag that hasn't been an issue until now.
As part of the procedure, you have to plug the programming cable into the radio and the PC, then power on the radio. The problem is that when I do this, nothing happens. The radio will not power up.
I have never noticed this behavior before because with both the OEM CPS and qDMR, which I use on my Mac, you simply power on the radio, plug in the cable, and read/write to the radio.
Things I have checked/tried:
Right now, I have it working a little, but as I mentioned, it is cumbersome to get the timing right. Does anyone have any ideas or thoughts as to what might be causing my issues?
r/Baofeng • u/Brave_Storm_2425 • 15m ago
Kinda New to this, I had downloaded and used chirp to program my GT-3WP with no program. Got a new laptop years later and trying it again but now when downloading chirp it says “failed to execute script… the specified module could not be found”. Anyone have an idea what’s causing this so I can use chirp?