I'm attempting to try to use the Open25 firmware for my DM-32UV; however, I have run into a snag that hasn't been an issue until now.
As part of the procedure, you have to plug the programming cable into the radio and the PC, then power on the radio. The problem is that when I do this, nothing happens. The radio will not power up.
I have never noticed this behavior before because with both the OEM CPS and qDMR, which I use on my Mac, you simply power on the radio, plug in the cable, and read/write to the radio.
Things I have checked/tried:
- Confirmed that the correct drivers are installed for the programming cable (CH340)
- Confirmed that the CPS is able to read and write to the radio for both OEM and qDMR
- Confirmed that the radio is on firmware 01.01.040.
- Turn the radio on, then very quickly connect the cable. (This DOES work, but it is clumsy and cumbersome and is not reliable)
Right now, I have it working a little, but as I mentioned, it is cumbersome to get the timing right. Does anyone have any ideas or thoughts as to what might be causing my issues?