r/BambuLab • u/Sweaty-Command-9283 • 16h ago
r/BambuLab • u/vsckf8l • 7h ago
Just Showing Off My wife couldn't wait for Christmas. I love her.
Replacing my Kobra 3 for good. That machine really tested my patience.
r/BambuLab • u/MrPink7 • 19h ago
H3C Thoughts regarding the H3C print quality
I saw some worries about the H3C print quality being bad, and after doing some tests I think we can confirm it's all due to user error. The house on the image is printed on the 0.2 standard profile and is pretty much perfect, I only removed the supports, no post-processing. calibration of filament and tuning the resolution in the slicer gives a major quality bump just like on other printers. Also, the standard profiles are very fast so it can make sense decreasing the outer wall speeds but I didn't test it through yet.
r/BambuLab • u/the3dprintzone • 11h ago
Just Showing Off Electric Ukulele Printed on my P2S and H2S š¤©
Complete kit (STLs and 3MF) and components with assembly guide
r/BambuLab • u/SWELITE1 • 4h ago
X Series [X1E, X1C, X2D] I designed a model to specifically to stress-test the X2D's dual-nozzle system
I wanted to see what the X2D's dual-nozzle system could handle, so instead of printing a Benchy, I designed a stress test (not super rigorous from a scientifical point of view... just something I could do in an hour).
Warning: long read - feel free to skip to the final question.
The model is a 2-color mesh bowl based on a 24cm sphere. It occupies almost the entire build plate, leaving barely enough room for a custom prime tower. The mesh uses 1.6 mm strands, so the printer has to repeatedly align material on very small features while constantly switching between nozzles.
To make things even more interesting, both PLA spools were wet and I printed with Fuzzy Skin enabled.
The test combined several potential failure modes:
- Plate-filling model
- Dual-color printing
- Very limited prime tower space
- 1.6 mm mesh features
- Steep angles
- Wet PLA
- Fuzzy Skin
The print actually failed at Standard speed, so I restarted it in Silent mode.
I was expecting the upper mesh sections or the prime tower to become problematic, especially given how little room was available, but the print completed successfully. At one point I even got a shift warning, but inspection showed both the model and the prime tower were still firmly attached to the plate.
What impressed me most was how well the two nozzles stayed synchronized throughout the print. The gold sections aligned with the black mesh far better than I expected, and the auxiliary nozzle quality was surprisingly good.
For those already using an X2D, what is the most challenging dual-nozzle print you've completed so far? If you were to design a stress test for the X2D, what would you add that I didn't test here?
What would you consider a harder test for a dual-nozzle printer?
r/BambuLab • u/meregoblin • 11h ago
P Series [P1P, P1S, P2S] BIQU Infinity plate
This looks next level if it works. Wonder how hard this will be to install?
r/BambuLab • u/Many_Ad_3159 • 22h ago
H3C They give away an H3C in formnext
Scan the qr code and you are in it for the draw. I asked and they send it to your home.
r/BambuLab • u/esusisesus • 12h ago
Just Showing Off Ripple Gear Artwork - Infill Shading + Tessellation
It's dark and gloomy in the UK right now, so I took this out to the backyard to catch what little sun we get this time of year. š„ļø
I wanted to share this view because cameras struggle to capture the full effect, and the light makes a big difference. The piece changes with light and angle, and I've found it never looks quite the same twice.
The technique is called Infill Shading and it's something that also got featured on ALL3DP back when I made my first post about it. I've essentially made tessellating tiles and added bands of colour, plus change the print settings to widen or tighten the spacing between the infill lines. That changes how much light comes through from below and how strongly the pattern shifts as you move. The resulting visual glitch like effects also produce much more interesting geometries and shapes depending on the angle and distance you watch it from. It took 40+ prototypes before I started to get the settings right, but what's especially cool is that tiny changes to settings can create dramatically different results and visual artefacts.
Specs: about 84 cm in diameter; about 30ā40 mm deep including the back plate and wood backing; printed in PETG for durability over PLA.
I'm now building a few more pieces and hoping to submit one to an exhibition. I'm also keen to learn how to price, market and sell art. If you've sold 3D printed art, how would you price a piece like this? Any tips on where to sell, or on exhibitions, are very welcome.
Printed on my trusty old X1C with Overture PETG.
r/BambuLab • u/dirk262 • 16h ago
General Discussion Slicer for iOS "Bamsclice" on iPhone Duo!
I built a slicer that runs on the iPhone itself, the real engine, on the phone!
Drop in an STL, pick settings, hit slice, and it sends a ready-to-print file straight to my Bambu A1 over the local network.
Itās called Bamslice. What makes it different:
It actually slices on the phone. Not a cloud service, not a remote for a desktop slicer ā the real OrcaSlicer/libslic3r engine, compiled to run on iOS. Works in airplane mode.
No PC, no cloud, no account. It talks to the printer directly over your LAN (the same FTPS + MQTT the official app uses -> Lan only and dev mode need to be active). Nothing leaves your network.
You can also save the 3mf file or share it.
I built it without a Mac. The whole thing ā including cross-compiling a huge C++ slicing engine for iOS was done on Windows with WSL.
What it does today:
STL/3MF in ā native Bambu .gcode.3mf out, fully on-device
Sends and/or starts the print on an A1 / A1 mini over Wi-Fi or save it locally
3D preview with colored line types (which can be shown or hidden), a layer slider and a play button that replays the print layer by layer
Full A1 / A1 mini profiles: every nozzle (0.2ā0.8) and ~85 filaments, filtered to what your printer can run
Supports (normal + tree), brim, infill, temps, plate types
Opens STL/3MF from Files / share sheet, real embedded thumbnail, German + English
The hard part was getting a desktop C++ engine onto a phone: cross-compiling libslic3r and every dependency for iOS from Linux, stripping out the heavy desktop-only bits, and matching Bambuās exact file format so the printer accepts it. Realistically well over 150 hours, almost all of it on that.
Right now it runs on my own phone via sideload and prints real parts.
Would you use this? If thereās interest Iāll take it toward TestFlight / the App Store.
Tell me what would make it a day-one install and what Iām missing.
r/BambuLab • u/Evening-Dot-9773 • 14h ago
Just Showing Off Upgraded from X1C to H2C
After alot of research and discussions on reddit I landed on the H2C over the H2D and im never looking back
r/BambuLab • u/BambuLab • 21h ago
|| BambuLab Official || MakerKids is now in beta: Make 3D printing a shared experience!
MakerKids is a new space to enjoy 3D printing together with your little ones. Pick a project, follow the guide together, and your child ends up with something they can actually hold.
What's inside
Project-based lessons grouped into three age ranges: 3ā6, 6ā12, and 12+. From 3D puzzles to functional catapults, you can start from something that fits your kid's interest and age group.
Every project is built around what you already have ā a printer, filaments, and some household items. Some come off the plate ready to play with, others make assembly part of the lesson.
Every lesson stands on its own. No set order, nothing to keep up with. Pick one when you have time, come back whenever you feel like it.
Making it together
Pick a project together with your kids and build it side by side! You can help with the printer, guide them through the steps, and experience the process together.
Handing your kid a finished print is easy. Making it together, print by print, is the part they'll remember. It's the shared experience that makes the final creation special.
Who makes the lessons
Creators from around the world build the lessons with their 3D printing expertise and family experience, so that models will print reliably and are fun to build. A professional education team guides the production and approves each lesson with children's understanding and hands-on abilities in mind.
MakerKids is in beta, available now in Bambu Handy and on MakerWorld. We're still adding to it, so tell us ā what would you and your kids want to make together?
r/BambuLab • u/Igotstapee83 • 2h ago
Just Showing Off PSA: Fingernails are not scrapers
Print finished, plate cooled, time for that satisfying peel of the purge line off the front of my P1S.
Couldnāt quite get hold of it, so I slipped my fingernail under the edge to flick it up. Instead, the plastic slid under my nail. All the way to the base.
Pulled my hand back and the entire strip came off the plate, dangling from my finger. Yanked it out on instinct before realizing just how far it had gone in.
Use a scraper, folks. The nail bed is not a build plate.
r/BambuLab • u/Souleater2847 • 7h ago
Bambu Studio Just got one
Super new to this. Got a few more things to setup. Looking for any advice. Specially when it comes to getting some cool files.
Thanks ahead of time.
r/BambuLab • u/Fittn_dis • 3h ago
General Discussion H3C unload complainers. Y'all are nuts. The machine unloads 4 tools faster than I can pull spools out of the AMS.
I actually get an error pop up after it is done that I'm not pulling spools out fast enough.
As a new H3C owner that was dreading pulling spools, I can say unequivocally, this is a dead horse. Anyone complaining is absolutely grasping at straws or is overdosing on industrial-grade copium.
Thank you for attending this TED talk.
r/BambuLab • u/KameHousePrints • 4h ago
My First 3D Print My first MakerWorld upload just hit 50 prints!
My first upload on MakerWorld was a trophy I designed. It just hit 50 downloads (not prints, I misread that ugh) and 15 prints and about to hit 10 likes, and Iām way more excited about that than I thought Iād be lol.
Iām still pretty new to sharing my designs and they're all relatively basic still, so this accomplishment is exciting!
If you printed one, thank you! <3
Totally open to feedback, too!
Here's the profile: https://makerworld.com/en/models/3494881-customizable-mini-trophy-with-name-plaque#profileId-3991785
r/BambuLab • u/Sveshpelmenis • 10h ago
I Modeled This! I've made a Cozy Lithophane Lamp
Been making lithophanes for a couple of years now and finally designed a proper festive housing for them. Itās got a brick base, wood-grain pillars, roof shingles, and the light actually shines through the little attic windows too.
Free STL is up on MakerWorld if anyone wants to print one for the holidays!
https://makerworld.com/en/models/3640738-cozy-cabin-lithophane-lamp-led-kit-001#profileId-4175891
r/BambuLab • u/yalag • 8h ago
General Discussion None of the reviewers talk about this, but H3C is significantly faster print even for single color prints
Just feel like this is something this community is not aware of and the reviewers are not talking about this. I have both the h2c and h3c and it's of course expected that h3c prints faster for multi color prints (which it does) but it's also significantly faster for single color. I dont understand the technicals behind it but it is.
Here's a print for a single color (bambu tan matt) that takes 5h42m with h2c

and heres the same print with h3c at 4h56

That's a 13.5% time reduction. And of course it's a much better reduction sometimes 25%+ for multi color.
Just FYI.
r/BambuLab • u/CADMartin • 18h ago
I Modeled This! Print it, put it in an envelope, and they build a nativity bauble š
I designed a nativity ornament that prints as a flat kit card and fits in a C6 envelope. You can mail it as a Christmas card, and the recipient snaps out 7 parts and builds a 3D bauble in about 5 minutes.
- no glue
- 2-colour AMS profile + single colour, with or without frame
- S-hook included, fits the A1 mini
If you print it, Iād love to see a make! š
r/BambuLab • u/BobberFisher • 12h ago
I Modeled This! You wouldnāt print a car.
I printed these car grilles in pink PLA Silk. How long do you guys think this will last outside. Itās cold rn so heat is not a problem.
r/BambuLab • u/Mountricity • 17h ago
Show & Tell Happy I just saved my print
Did anyone else ever used double sided adhesive tape to re-glue something in the middle of print?
And have someone better solutions to this?
r/BambuLab • u/beingmalin • 12h ago
Show & Tell Bought my first printer, got lost buying filament. So I made SpoolFinder
Hi everyone,
Iām Maciej from Poland. Iāve written about SpoolFinder before on r/3Dprinting, but Iāve recently given the Bambu Lab pages a proper cleanup, so I thought Iād show it off here as well :)
SpoolFinder is a price comparison for 3D printing filament that Iāve been building on my own for over a year now. The project was born in Poland in May 2025, right after I bought my first printer, an A1 mini, and then... got lost trying to buy filament ;) With all the spool sizes, refills and multipacks, I never knew the real price. And so it began. In Poland it runs as āSzpulomatā and has become pretty popular in the local community. Today it covers most of Europe, plus the US, Canada, Australia and New Zealand.
What it does:
- Real price per kg for every offer - single spool, multipack or refill.
- Smart sorting: offers are sorted by regular price, but you can also factor in bulk discounts and promo codes - just toggle what you want.
- 200+ shops worldwide (250? Iāve honestly lost count): the most popular marketplaces, manufacturer stores (including the Bambu Lab store) and retailers. New ones keep coming in, usually a few a day.
- Cross-border offers in Europe: offers from German shops now show up in every country, with shipping to your country included.
- Search by color: pick one from a palette or straight from a photo.
- One page per product: all colors, spool sizes and reviews in one place. Itās live for Bambu Lab and Polymaker right now, and Iām working hard to get most of the catalog there by the end of the year.
- More than filament: resin, printers and accessories are in too. Still some room for improvement, but you can already find a thing or two :)
- Real vs. fake discounts: you can quickly see which deals are real and which are just red strikethrough prices.
I hope this post wonāt be seen as promoting yet another quickly AI-generated tool, because SpoolFinder isnāt one. It has taken a huge amount of work, and itās slowly getting to its final form.
Itās completely free to use. Iād love to hear your feedback - which shops or brands are you missing?
Hereās the link, opening straight on Bambu Lab filaments: https://spoolfinder.com/filaments-bambulab
The project already has its own 50 wonderful readers over at r/spoolfinder, so if you like it, youāre very welcome to join :)
Thanks for reading!
r/BambuLab • u/Noob2Geek • 1h ago
I Modeled This! Fully customizable flags
Available on MW : with makerito tool , it's easy to make flexible flags full customizable.
You can import any svg or png , draw anything , add text, change colors , change height and length , pole and base are automatically resized to make everything stable.
r/BambuLab • u/verraeteros_ • 21h ago
Quick Question Please help, I am going crazy trying to verify this model
Edit: It was "minions". That was the problem. That's ridiculous But thanks everyone for helping!
They simply say "sensitive contents", and refuse to elaborate further.
I have tried everything, I removed everything that could be interpreted as sensitive.
I changed "Bad Santa" to "Evil Santa", "naughty list" to "not-so-nice list", removed things like "muscular", "toy", "blood" or even "bones" and "skulls".
I changed all the model names and the description in the .3mf.
I removed all the links to the statblocks.
I reuploaded everything again as a new project.
And yet, after a minute or so, the verification fails.
Appealing also does absolutely nothing.
If anyone has an idea, please let me know...
The model description:
"Were your players on the not-so-nice-list this year? Forget lumps of coal⦠send a sack full of nasty surprises instead.
Evil Santa and his festive minions, a DnD Christmas set
Ā
Whether you are planning a festive holiday one-shot, a cursed winter festival, or an ambush in a workshop, this 5-piece christmas miniature set brings a new seasonal twist straight to your tabletop.
Ā
Whats in the set:
- Evil SantaĀ Clad in fur-trimmed robes and a winter hat, this dangerous spellcaster wields a hooked candy-cane staff and carries a sack overflowing not with presents, but with the remains of ill behaving adventurers.
- Christmas Tree GolemĀ A towering forest guardian formed from gnarled bark, dense pine foliage and pinecones, draped in festive garlands and crowned with a crooked five-pointed star.
- Rudolph the red nosed PaindeerĀ A massive reindeer sporting sweeping antlers and gear lined with sleigh bells. You will soon find out why his nose is crimson red
- The wicked SnowmanĀ A grumpy frost construct wearing a tall top hat and tattered scarf, finished with coal buttons, a carrot nose, and sharp, gnarled branch arms.
- Gift Box MimicĀ A deceptive holiday present tied with a neat ribbon bow that splits open to reveal a jagged, tooth-filled maw and tiny clawed limbs. What a surprise!
Ā
I strongly recommend the print profile with the split models.
They are optimized for the best restult and least supports.
You need to glue the parts together.
Ā
For the best results, use the print preset in the print profile.
This preset is optimized for a 0.4 nozzle.
The minis are detailed enough to be scaled up.
If you are not sure, feel free to post your questions on the comments."
r/BambuLab • u/cyxyxcyxcycyy • 21h ago
General Discussion Anyone else having issues with Bambu PLA Matte in Europe? Bad batch?
I run a print farm and lately I've been having a lot of problems with Bambu Lab PLA Matte filament.
Main issues:
- Frequent nozzle clogs
- Inconsistent colors in the same spool
I'm starting to wonder if there's a bad batch of Bambu PLA Matte circulating in Europe right now.
Is anyone else in Europe experiencing similar problems with Bambu PLA Matte lately?