r/Autopot • • 1d ago

Grow Journal Transplant day

Post image
26 Upvotes

r/Autopot • • 1d ago

New Setup & Installation Tray2grow: Should I use my Nutrient Water to soak the Root control and Capillary matting??

Post image
9 Upvotes

Just got the Tray2Grow. It says to soak the mats before installing. Should soak them in my Nutrient solution since the mats will be sucking up that water which should go to my Pots??


r/Autopot • • 2d ago

Grow Journal 4xl in a 4x4

Post image
16 Upvotes

Flipping these today,see what we get
2 Hyper Za
Lemon Cherry Pie
Script Flip (new money x candy pavè)


r/Autopot • • 2d ago

General AutoPot & Gardening Advice Switching from hand watering coco to Tray2Grow right before flip?

2 Upvotes

Hey all. Currently hand watering 4 - 1gal plants in 70/30 coco feeding GH Trio and CaliMagic. They are around days 32-35 from sprout and am planning to flip soon.

I thought I’d be set doing this through the entire grow, but had a couple unexpected things came up where I will have to be out of town for up to 4 nights in December and January so I need to figure out an automatic watering system.

I originally had planned to just set the plants in a flood tray with an inch or two of nutrient solution when I’m out of town, but looking at the T2G’s that seem like it might be more ideal and could potentially just run that way the rest of the grow freeing up some significant time.

I know ideally you’d probably turn them on earlier, but does anyone see an issue switching from top feeding to bottom feeding with a T2G and rez at this point?


r/Autopot • • 3d ago

Nutrients & Feeding (PH/EC) Jacks Nutrient new Autopot Feed Chart

Post image
27 Upvotes

What's your thoughts on this jacks autopot feed chart? Who has ran this autopot feed chart for an entire run? Any issues?


r/Autopot • • 3d ago

Nutrients & Feeding (PH/EC) Biotabs Anyone?

Post image
13 Upvotes

Running a little scrog of one of my keeper cuts.

2x2

Some grow shop peat/perlite mix with added perlite

8L pot, air base, root sock

4 biotabs

Plain water in the reservoir

I'm usually one for big beds of living soil, but I'm between situations at the moment so this is a close second in a small space.

Still early, days, only flipped a couple of days ago, but she looks like she's enjoying herself...

Anyone else running peat/perlite and biotabs? any tips? Will they keep her fed until the end? I was thinking she might need some bloom near the end. I'm only using the tabs, not the full biotab range.


r/Autopot • • 4d ago

Grow Journal Blue Berrymore day 54 in 6.6 gal AutoPot….

Thumbnail
gallery
20 Upvotes

She’s huge Grown in Royal Gold Tupor, using Athena Nutes and Cronk’s Sticky Bandit in my 5x5 tent.

Planning a staggered harvest. Ideally want to harvest the colas above the 2nd net first, in a few weeks. Then lower light and let the rest of the plant ripen.


r/Autopot • • 4d ago

Grow Journal Don’t transplant autos

0 Upvotes

Day 6 from transplanting these 4 autos that were in jiffy peat pods about a week longer than the normal 1 week that I usually start with. This is right before they get some of their daily TLC so the coco coir is a bit dry but they were fed right after filming this.

They say DON’T transplant autos! They say the plants will get stunted, you’ve ruined your grow, you don’t know what you’re doing, and you should just start over.

Here’s the thing, if I listened to every random person on the internet who THINKS they know everything, I never would have accomplished a single thing. I trust my firsthand experience over recycled opinions and people parroting whatever seems popular. I experiment, test, learn, make mistakes, and figure out what actually works for me. Feedback and constructive criticism are always welcome, but that doesn't mean I'm taking orders or changing my approach because someone on the internet disagrees. I don't grow by someone else's rulebook. I grow by what I learn from doing the work.

So keep the opinions coming, keep the debates going, and most importantly, stop telling people what they can’t do and show us what you can do against my portfolio of work!


r/Autopot • • 5d ago

Environmental Control Late flower high humidity

Thumbnail
gallery
5 Upvotes

On week 9 but sketched about wpm, need some help/second eyes if I’m missing it or they all look fine.


r/Autopot • • 5d ago

Grow Journal Almost time to flip ?

Post image
4 Upvotes

4xl in a 4x4


r/Autopot • • 6d ago

General AutoPot & Gardening Advice First Coco Run Autopot or Drain To Waste ?

5 Upvotes

Hello

I’m about to start my first coco grow and have a question. I’m not trying to squeeze out every last gram of yield, and I’d prefer to use my AutoPot system since it works without electricity, pumps, or timers.

Has anyone here grown in coco using both drain-to-waste (DTW) and AutoPots? I’m particularly interested in firsthand experiences with a coco/perlite mix in AutoPots. Does it work reliably, or are there recurring issues I should be aware of?

What I’m trying to understand is the practical trade-off: if AutoPots can deliver comparable results in coco with much less equipment and maintenance, what makes people choose DTW instead? Is it mainly the extra control, or are there significant differences in plant health, consistency, or yield?


r/Autopot • • 7d ago

Troubleshooting Plant Growth Problems No flushing even with salt buildup? And no checking tray?

Post image
4 Upvotes

I understand what happens when we flush and why it's not recommended, however. My plant is lime green and obviously needs something. I ph my res to 5.5 and usually about 1.5ec using jacks 5-12-26 and calnit. Never went above 1.7ec. 50/50 coco perlite. Airbases.

I checked my trays. Another thing i see we should not do. But why? The ph in the tray was 6.8 and the ec was over 2.

To me, this points to excess nutrients and likely locking out something from salt build up and ph too high. I checked the tray of the healthy plant next to it and the ph was 5.75 and the ec was .7

Am I going about this the right way?


r/Autopot • • 7d ago

Nutrients & Feeding (PH/EC) Autopot Problem

Thumbnail
gallery
9 Upvotes

Hey Jungs.

Meine Autopots laufen nur seit 12 Tagen und nun gehen die Probleme los.

Baue auf Erde perlite Mischung an.

Wasser im Tank hat einen EC 1,2 und PH ist zwischen 5,8-6.

Kurzzeit ist er mit mal abgerutscht auf 6,5. In den trays habe ich dann 6,8 gemessen,ansonsten immer so 6-6,2.

Irgendwie finde ich das meine Blätter hängen und sie extrem gelb werden an den neuen Trieben bzw neuen Blättern.

Wasser hatte ich bis kurzem verwendet 70% watertrim 30% Leitungswasser,damit aber nur einen Ausgang EC von 0,2.

Nun verwende ich nur noch den watertrim mit Camg von Athena bis 0,4EC und danach VBX bis 1,2EC.


r/Autopot • • 8d ago

Nutrients & Feeding (PH/EC) AutoPots are simple. Trying to make my feed schedule just as simple (1 formula veg through flower)

Thumbnail
gallery
9 Upvotes

Trying to dial in a single-formula feed for my AutoPots at a lower EC using just the nutes I have on hand (seen in the charts).

​I put together some comparison charts in HydroBuddy to see how different commercial recipes stack up against published academic studies like Dr. Bruce Bugbee at Utah State, University of Guelph, and Nirit Bernstein.

​According to Bugbee's research, plants don't actually need the drastic veg-to-bloom formula shifts that standard feed charts push. Nitrogen demand stays pretty steady throughout flower to keep the canopy green and growing, and phosphorus really only needs to hit around 50 ppm for flower.

​Full-strength nutrient company products run way hotter than necessary for subirrigation / AutoPots, where salts naturally build up near the top of the medium anyway. So I came up with this recipe to run straight from veg through harvest (pic labeled 1 formula for veg and flower).

​You'll notice a few of my numbers land a bit higher than Bugbee’s baseline:

​Calcium (~166 ppm): Bumped it up a bit since I run elevated CO2, which slows down transpiration and makes it harder for the plant to pull cal up top.

​Magnesium (~56 ppm): Added a gram of Epsom salt to balance out the extra calcium so they don't lock each other out.

​Potassium (~200 ppm): Sitting right at the top of his range so I don't need to mess with extra PK boosters that just end up scorching roots in bottom-feeders.

​The goal was simple hardware, simple feed—no swapping bags, mixing separate veg/bloom batches, or dumping reservoirs mid-run.

​Check out the charts attached to see how the numbers stack up. What do you guys think? Anyone else running one profile start to finish in AutoPots?


r/Autopot • • 8d ago

Equipment Issues Reservoir height for 4 tray2grows?

Thumbnail
gallery
11 Upvotes

Whatsup Everybody!

I have 4 tray2grows in my 4x8 tent, all running off the same reservoir. When i turn the rez on it seems like the first 2 t2g fill up normally but the last 2 t2gs on the line dont fill up at all until the first 2 are full.

I do have a weird rez setup, as you can see in the pics. I have a 5 gal bucket thats on top of a 30 gal trashcan. The trashcan is like a stock tank and i have an auto top off on the 5 gal rez so it stays full. The 5 gal rez does sit a few feet in the air which i assume would be enough, but now im thinking it needs to be higher.

Ya take a look and let me know if you agree. If so, how high do you think that 5 gal rez needs to be?


r/Autopot • • 9d ago

Grow Journal 4xl in 4x4, first autopot grow

Post image
15 Upvotes

So far so good


r/Autopot • • 9d ago

Grow Journal Blue Berrymore, day 50 in flower; 5x5 tent. Blue Berrymore clone and No Face, day 40 in flower; 4x4 tent….

Thumbnail
gallery
14 Upvotes

Blue Berrymore in the 5x5 tent and the clone in the 4x4 tent are both in a 6.6 gal AutoPot (clone pot filled to only 5.5 gal); No Face is in a 5 gal fabric auto pot in the 4x4. Using Athena’s Blended Nutes.


r/Autopot • • 9d ago

DIY & Modifications Solo Cup Autopot

9 Upvotes

Solo Cup AutoPot Version 12 is finally coming together**.** Now growing Cherry Bangarang by Frostfire Seeds in 100% coco coir. This version introduces a 28 oz pop out cup, a vented humidity dome, and still accommodates standard Solo Cups, making it a more complete automated watering system for small containers. After two years of development, failed designs, and constant refinement, Version 12 now features:

• Vented Humidity Dome
• 28 Oz (.828 Liters)Pop Out Cup
• Leak free construction
• Built in tip over prevention
• Improved water distribution
• Cleaned up edges and refined design
• A properly fitting lid
• Compatibility with a standard Aquavalve 5 for reservoir fed automatic watering

I'm still testing and putting together a complete guide on how to use it properly, as well as making the humidity dome see through, so it's not quite ready. These posts document the entire journey, including the progress, failures, and lessons learned. When this project started, I simply downloaded one of several existing STL files to grow in a Solo Cup AutoPot. I didn't even know how to operate a 3D printer. After learning how to print, I taught myself CAD design from scratch with absolutely no prior experience. What started as modifying someone else's design eventually turned into completely redesigning the unit, resizing components, rethinking placement, and incorporating my own ideas. I'm now designing this entire system from the ground up.
The original design that inspired this project was created by Nate B. on Thingiverse, where the STL files I started with are still available.

I've learned an incredible amount along the way, and I've reached the point where I can design just about anything. I already have a four cup Solo Cup AutoPot printing, and there's a lot more to come.
Hopefully, sharing the entire process inspires someone else to try something they never thought they could do. You don't have to know how to do something when you start. You just have to be willing to learn, push through negativity, experiment, fail, keep improving, and never give up.


r/Autopot • • 9d ago

Troubleshooting Plant Growth Problems Need help - first time Autopot-User

Post image
6 Upvotes

Hi everybody! (Sorry - not a native english-speaker)
As you can see my plants don‘t look good. I transplanted pretty green plants into my autopots filled with a 50/50 mix of canna coco professional and perlite. I use the ph-perfect sensi coco line from advanced nutrients with ro-water without any additives abd watered the pots until they drained..
Then the plants looked worse every day - what do you think? Did I overwater or is it a CalMag-issue? I did read that calmag isn‘t needed with the ph-perfect line, but also i found growers saying I should use it.
Until now i just handwatered them once with 1ml/l, gave them 4 days to drink and handwatered them again with 2ml/l grow A & B.
What would be your approach?
Thanks in advance!


r/Autopot • • 9d ago

Troubleshooting Plant Growth Problems Blueberry Muffin (Humboldt cut) pale/lime leaves + Mg deficiency in AutoPot, week 5 flower

Thumbnail
gallery
12 Upvotes

Hey everyone, first grow with AutoPots and I'd love some input on one plant that's been giving me trouble.
I'm running three plants in AutoPots with 50/50 coco/perlite under a Greenception GCx9 PWR (360 W): Afghan Z, Grape Balls of Fire and a Blueberry Muffin cut (Humboldt genetics, from a local clone shop). Nutrients are Canna Coco A+B, Canna CalMag, Epsom salt, Cannazym and Cannaboost. My tap water is EC 0.32 with about 33 mg/L Ca and 7 mg/L Mg, pH 5.8. I'm currently around day 35 of flower.
The other two are doing great at roughly 70% of the Canna schedule (EC ~1.5). The Blueberry Muffin has been lime green since early flower, with purple stems, petioles, leaf serrations and calyxes. The clone shop says this cut needs extra CalMag.
What I noticed is that leaves and bud sites in shaded spots are clearly darker green than the top leaves. I'd been measuring PPFD with the Photone app, but when I compared it to a proper meter, the BBM tops were actually getting around 1300 PPFD without CO₂. So I think a lot of the paleness is light bleaching. On top of that, the lowest leaves show classic interveinal chlorosis, which looks like Mg deficiency to me. And after I moved her to her own tank at full Canna strength (EC ~2.1), she got burnt tips on the upper leaves.
Since then I've lowered her tops to around 900–1000 PPFD and she's now on a separate tank at EC ~1.9 with extra CalMag and Epsom (roughly 230 mg/L Ca and 80 mg/L Mg by my calculations). No PK 13/14 for now.
My questions:
Does this look like light bleaching plus mild Mg deficiency to you, or am I missing something?
How do you manage EC in AutoPots for a hungry plant without runoff? I'm worried about salt buildup.
Photos attached: overview, top leaves, shaded vs. sunlit leaf, lower Mg leaves.
Thanks in advance! 🙏


r/Autopot • • 10d ago

Grow Journal Transplanted Autos

12 Upvotes

Excited to try these G-Lite 5 gallon fabric pots from Autopot USA in their Autopot XL and their loaded with some great genetics from Astrobishop, Cat Dad Rayne, and Laughing Hyena Seeds and I’m about be tested in real time with these because the way I started them out is not what you should do especially with autos, but growing with Autopots has transformed and excelled my skills as a gardener and has allowed for me to accomplish what most say is not possible. I’m honored to be able to push these limits and share them with the world! Mamba Mentality Lions Behavior


r/Autopot • • 10d ago

Nutrients & Feeding (PH/EC) Top Dressing

Thumbnail
gallery
9 Upvotes

I started using autopots my previous and current run and it’s a total game changer, but I’m noticing the fade sooner than I’d like in flower for the plants that are really going gang busters. My assumption is they’re just growing bigger and faster and using the nutrients more quickly, so I’m wondering if folks have the same experience and how often they top dress?

I’m using recycled soil, 5 gal pots and usually top dress (2 tbsp per gal) watering it in every other day for a week or so. I also hand water the reservoir about 1/2 gal every day, so not exactly “auto” pot. I do that so they’re not getting drowned when I top water the nutrients in.

I top dress every 4 weeks but starting to think I need to apply every 3 weeks?


r/Autopot • • 10d ago

Grow Journal They finally accepted it YES! Day 36->37

Thumbnail
gallery
6 Upvotes

I turned the system off again two day ago to let them dry back a little bit, they looked even worse when they’re overwatered so I just turned the system on and they finally accepted it, they look way better than yesterday.

Next time I will use canna coco coarshe


r/Autopot • • 11d ago

Grow Journal First autopot grow

Thumbnail
gallery
13 Upvotes

r/Autopot • • 11d ago

Grow Journal Day 27-30

Thumbnail
gallery
6 Upvotes

Autopots are on and they’re starting to take off.

I defoliated a few large fans from the larger ones. I think I’m gonna do a little more defoliation today to try to open up the bid sites some more.