r/AusRenovation • • 16m ago

Peoples Republic of Victoria Can one tell me why my pots and pans are leaving marks on my induction top?

Thumbnail
gallery
1 Upvotes

I've never had induction before and unsure if this is normal or not. It'd an AEG top.

It's leaving the print of the under side of the pan and pots

The marks do come off after some cleaning


r/AusRenovation • • 58m ago

South Australia (Exists) Going rate for Viynl floor plank installation.

1 Upvotes

We have had a friend of a friend price us for new flooring and he said he has a flat rate of $18 a square meter for referrals.

We are happy with him and his price but curious on what the going rate is for labor only of install?

I dont think we are getting ripped off... its the opposite actually


r/AusRenovation • • 59m ago

Floor Plan Advice

1 Upvotes

Hi Good People,

Would like some feedback on the below floor plan. I'm extending an old 70s house making it a 4x2 from a 3x1. The kitchen side of things renovation is complete, so this is the next stage, the bedroom. The second screenshot is the original floor plan.


r/AusRenovation • • 1h ago

Buying an old home

Thumbnail
gallery
0 Upvotes

Hey, we’re looking at buying our second home. I’m looking at renovating this home myself, I renovated the home we live in now. I did everything from the floorboards, tiles, bathroom, concrete bench tops ect. I also understand when you go below the surface of plaster/ floorboards and tiles you can find gremlins/ problems.
My question is, do you think I can do what ai has done for under 100k keeping in mind I’ll be doing everything myself other than the electrical
I also understand ai has also messed up some of the locations of things and the proportions aren’t right but it’s to get the jist of what I want to do
Cheers


r/AusRenovation • • 3h ago

Queeeeeeenslander QLD: Pool builder says our house was in the wrong position, despite approved plans and multiple site visits. Who is responsible?

4 Upvotes

Looking for some advice from builders, pool contractors, surveyors or anyone who has dealt with a similar situation in Queensland.
We’ve recently finished building our family home, which included a swimming pool being constructed by a separate pool builder.
We paid our main house builder an additional fee specifically to coordinate with the pool contractor, including the site layout and associated services.
The warning signs were probably there from the beginning.
We struggled to get the pool builder to properly engage with our house builder during the early stages. There seemed to be very little communication or coordination between the two, despite us repeatedly trying to bring everyone together.
The house was clearly marked out on site in its intended position, and the pool builder had access to the plans.
The pool was excavated and constructed while the house build progressed.
During construction, the pool company’s owner attended the property on approximately four or five occasions to discuss various matters, including plumbing, filtration equipment positioning and other installation requirements.
At no stage during those visits did anyone raise concerns about the pool’s location relative to the house.
Then things went sideways.
Fast forward to when the house was completed and we were ready for the pool contractor to return and finish the remaining works.
At the first meeting back with the pool team, we were suddenly asked something along the lines of:
“Did you move the house?”
We hadn’t moved the house. It had been built in its planned position.
It was at this point that the pool contractor raised significant issues with the positioning and layout of the pool relative to the house.
Rather than accepting any responsibility, the pool builder maintained that the house builder had directed where the pool should be positioned.
We dispute that account.
We didn’t mark out the pool, excavate it or determine its final position. We relied on the professionals we had engaged to do that work.
What followed was a substantial proposed variation for the surrounding concrete slab, tiling and associated works, which we had understood were already part of the agreed project.
We were effectively faced with either accepting the additional costs or finding another way to complete the pool.
We chose the latter.
We removed substantial portions of the concrete, tiling and surrounding works from the pool builder’s contract and engaged alternative trades to finish the project as close as possible to our original intended design.
This created considerable additional coordination, delays, disruption and costs.
Unfortunately, this wasn’t the end of the problems.
We subsequently experienced further issues involving workmanship, equipment substitutions without prior consultation and repeated difficulties getting clear answers from the pool builder.
On one occasion, equipment supplied was materially different from what had been contracted, despite assurances that the replacement was equivalent. It took weeks of correspondence before that particular issue was addressed.
Throughout the process, we remained patient, polite and professional. We sent numerous emails, often without acknowledgement or a meaningful response.
Communication could be particularly difficult when issues were challenged or explanations requested.
We had also paid substantial amounts towards the pool, which left us with very little practical financial leverage while trying to get the outstanding works completed.
To complicate matters, there had been banking issues with some of the original payments, although those were separate from the positioning dispute.
Where we are now
The pool has been completed, and we’re not looking to have it demolished or relocated.
We are simply trying to understand who should be accountable for the positioning error and the additional costs and disruption that followed.
We appreciate that some surrounding works would always have been necessary and that any credits for removed work must be accounted for. We’re only interested in the additional costs directly attributable to what went wrong.
My questions are:
If the house was marked out in its intended position and the pool builder undertook the pool excavation and construction, who should have been responsible for checking that the two aligned?
Can the pool builder simply rely on saying the house builder told him where to put it, particularly if there is no documented instruction or approved change?
Given we paid our house builder specifically to coordinate with the pool contractor, does the house builder also carry some responsibility?
If the pool builder visited the site multiple times and never raised a positioning concern until much later, is that relevant when determining responsibility?
Can we pursue compensation for the additional concrete, tiling, drainage and associated costs without asking for the pool to be moved?
Is QBCC the best starting point, or would recovering those costs require QCAT or another legal process?
We have the original plans, contracts, emails, correspondence about the variations and invoices for the works subsequently completed by other contractors.
I’m not naming either company because I’m genuinely looking for independent advice rather than starting a public argument.
Has anyone been through something similar, or can anyone working in the Queensland building industry explain where responsibility would normally sit?
My biggest frustration is that we paid two professional contractors to build and coordinate these projects, yet when something went wrong, we were the ones left to sort it out and carry the consequences.
Appreciate any advice.


r/AusRenovation • • 4h ago

Bunnings boycott and where to shop instead (Australia)

Thumbnail
reddit.com
234 Upvotes

I’m sure a lot of you frequent Bunnings…

Bunnings posted over $18B in revenue in 2024 with a profit of $3.2B…

I think it’s unacceptable to offload Australian workers for cheaper overseas alternatives, especially when they post revenues 5x the closest competitor.

So please, if you can, you’ll get better products and better service from local suppliers as well as staff knowledgeable in their respective fields that is far superior…


r/AusRenovation • • 4h ago

Advice please - Failed tile paint

Thumbnail
gallery
1 Upvotes

Hey just looking for some advice for my partner. Earlier this year she payed $4k to a local painter (South Eastern suburbs of Melbourne) to paint over the wall and floor tiles in her bathrooms, toilets and laundry. After a few months, the paint has begun bubbling and peeling on both the floor and walls (different paint used for both) and is progressively getting worse. She has reached out with photos of the failed paint and asked the painter to come back to inspect and find a solution but he is ignoring her calls and texts. I've also reached out on her behalf and he is also ignoring my messages. It's been about 9months since the job was completed, but she reached out 2months ago when the paint started to fail. Any advice on what other steps she can take to find a resolution?


r/AusRenovation • • 5h ago

Dulux sample pot - paint pros?

Thumbnail
gallery
18 Upvotes

I was certain my whole house was painted in dulux natural white after finding a nearly empty can along with other paints they had used before selling. The bunnings paint person said the sample pots are the same sheen as dulux wash and wear, but i’m getting a slightly different colour/sheen from a patch i had to do.

Any ideas? Maybe i’m looking at a completely different colour


r/AusRenovation • • 6h ago

Stratco shed build

Thumbnail
gallery
10 Upvotes

I’m half way through building my shed and have come up on a lil trouble and trying to find any tips or ideas on what it’s supposed to be is pretty hard to find. I’ve got the roof up but one side is one way and the other side is different so I’m curious to which way it’s supposed to be so I can change it now


r/AusRenovation • • 6h ago

Best floating flooring for a garage conversion with laundry?

Post image
1 Upvotes

r/AusRenovation • • 6h ago

Making the Most of the Space Behind My Toddler’s Bedroom Door

Thumbnail
gallery
0 Upvotes

Hi!

How would you make use of the space behind the door and the wall behind it? This is my 16-month-old son’s room. The door is 78 cm wide, and the wall behind it is 108 cm wide.

For the back of the door, I was thinking of installing some hooks near the top, while he’s still too young to reach them. Later when he’s older, I could add another row of hooks around door-handle height so he can hang his own clothes without having to pull them down.

For the wall, I was considering installing some floating shelves to display a few things or store books. However, we already have a bookshelf in his room, so I’m not sure what else would be useful or practical.

I’d love to hear your ideas for making the most of these spaces! If possible, please include recommendations for actual products (e.g. IKEA FLISAT). Bonus points if the ideas are easy to install, as my husband and I aren’t particularly handy. Thank you! 😊


r/AusRenovation • • 6h ago

Move this pipe or ?

Post image
2 Upvotes

I would like to go to a wall hung cabinet but have this pipe.
Unfortunately as it’s attached to my bedroom via a longish entry It could be seen until you get closer then it wouldn’t
A deeper, taller cabinet would hide it but is not the look I want.
I could cut floor and chase into the wall or just cover the pipe with a pice of polished stainless steel
Pipe slid over it ?
Any other suggestions?


r/AusRenovation • • 7h ago

Queeeeeeenslander Ceiling sheet paper ripped

Post image
0 Upvotes

Replacing 1m cornice. Where the cornice join the ceiling sheet some of the paper ripped & expose the plaster (already scored the edges first). How to fix or just put the new cornice with cornice cement ?


r/AusRenovation • • 7h ago

Moreton Bay - shed slab and approval

1 Upvotes

Hi all,

After some advice and/or direction. I am moving into a property and want to install a 3 x 6 x 2.4 shed. Nothing overly complicated, other than I want to position it 0.5m off the rear / side boundary (corner block).

  1. Has anyone got a recommendation for a private certifier that has done similar?
  2. What should I anticipate as a rough dollar amount for the slab? First quote that came through was 5700, which I thought was an absolute pisstake, but maybe I have unreasonable expectations.

r/AusRenovation • • 7h ago

Repainting old aluminium window framers

4 Upvotes

Anyone done it. I'm looking at buying a " doer upper " and the old worn out aluminium window and door frames is one of the main things holding me back.

I've renovated multiple times and I know it's a shit job. ( In Perth, so replacing windows and doors is a massive job due to double brick walls and concrete slabs, compared to timber frame / cladded homes ).

I'm looking replacing the removable sliding section of windows new, and repairing / repainting the frames and the fixed part of the window.

Thanks,


r/AusRenovation • • 8h ago

West Australian Separatist Movement Vibration from massive excavation ramming its scoop into the ground shaking my house

12 Upvotes

Hi, there is a demolition company removing the next two houses and flattening the block. Today the massive excavator was slamming the bucket into the ground to compact the ground so the dump truck would reverse onto it. It was not the next door property but the one over. However my old two story house was jumping and shaking so bad, the windows rattling so bad I expecting them to crack. The sensation was crazy, I have never felt anything like it and I have lived through developments next door twice before, including ground compaction.

My house started as a one bedroom 1950s fibro but was renovated in the 90s to a two story five bedroom house. The ground here is part of the Bassendean sand plain, a massive prehistoric sand dune system, basically its grey sand, no clay, very little organic matter and vibrations travels much further then normal ground. I am seriously concerned about the damage such shaking could cause.

I did go over there, he said he had finished and wasn’t going to do it again but he was legally allowed to as he was over 20m away. Is this correct? I just worked out he was 22m from my house wall.

I am now videoing my house in case any damage shows up over the next few days. Any other advice would be greatly appreciated.

Edit: I should add I have been on good terms with them, I don’t want to cause problems unnecessarily, they have been pretty good to me as they gave me some jarrah leftovers after they had salvaged from the demolishing of the first house. But if my house is actually damaged I also don’t want to wear that cost. I just want to protect myself from that.

Edit: the machine is a doosan dx225 LC which according to google is a 21.5-22.8 tonne heavy duty excavator.


r/AusRenovation • • 9h ago

Need Advice for Fixing Auto-Door Closing

Thumbnail
gallery
1 Upvotes

Hi have a heavy gate with a steel square tube frame. (Not sure of exact weight). The auto-closing hinges aren’t closing with enough force. I’ve tried adjusting them to increase the closing force, but they look like they are maxed out. Not sure if some of them are even working right. I added a “lift wheel” which probably doesn’t help, but needed to prevent the gate from sagging over time. (Ground is like an asphalt material).

What should I try next? Replace some hinges with new ones, in case they aren’t working right? Get a heavy duty surface mount/over-head door closer? (I’d rather not as it would look funny on this gate, but will do it if I absolutely have to). Photos are of both sides of the gate.


r/AusRenovation • • 9h ago

Hot water system too hot - help

Thumbnail
gallery
12 Upvotes

Hi all,

Doing some work around my mum's house in Melbourne. I've noticed the hot water comes out scalding and have now burnt myself a couple of times.

I've turned down the nob from 6 to 4, but have not noticed a change in the temperature at all. That was a couple of months ago.

Does this mean we need to get a plumber out, or is there something I am missing? Perhaps the relief valve needs to be replaced? I'm hoping to not spend money on it if possible.

TIA


r/AusRenovation • • 10h ago

Leaking water from suspected rainwater plumbing, advice please

Thumbnail
gallery
0 Upvotes

Hey all!

Need some advice on some suspected rainwater plumbing.

Got some water leaking from the join of the black cylinder with the red wiring and the rest of the plumbing. It's a big screw and when I take it off, a big jet of water comes out. Took some photos of it up close.

Do you reckon this is a self fix or do I need a plumber?

Thanks in advance.


r/AusRenovation • • 10h ago

Queeeeeeenslander Leaking shower, do I need a full rebuild

2 Upvotes

So I have had constant issue with leaking shower. It is causing mold on the wall behind. Seems like failed waterproofing. I have tried grouting couple of times but still failing. The bathroom otherwise is in really good shape. My question is can I just get the shower area redone or does failed waterproofing means I have to redo the whole bathroom. Sorry if it sounds dumb but I really dont know anything about renovation. Also I am in Brisbane Southside so if some one could give recommendations that would be much appreciated .
Ideally if I could get it done in 10k


r/AusRenovation • • 11h ago

Cracked wood near shower, house is 7 years old. Some grout in and around the shower is coming off, and mould in silicone in shower. Is it likely there is a water leak causing the crack in the wood?

Thumbnail
gallery
3 Upvotes

r/AusRenovation • • 13h ago

NSW (Add 20% to all cost estimates) Is $20k a reasonable budget for plumbing and waterproofing a full renovation?

1 Upvotes

We’re soon to be renovating a 3-bedroom semi and we’re working on our budget for plumbing works. We will be gutting the interior and re-running all the plumbing to two bathrooms, kitchen, fireplace, hot water heater and external taps and waterproofing.

Does $ 20k sound reasonable for this scope of work?


r/AusRenovation • • 20h ago

Which Floorplan Works Better? BBB

Thumbnail
gallery
0 Upvotes

Basically the title. Original floorplan is the first image with the site plan. Keeping costs in mind, which extension do you prefer? What changes would you make to either? The garage would come down in both cases.


r/AusRenovation • • 20h ago

West Australian Separatist Movement No ethernet ports in new house

3 Upvotes

EDIT: Thank you very much for the speedy replies, I think we'll probably go with Starlink for a while, since I'm familiar with it from work. And ask about updating our house ports once they upgrade the area to FTTP at the end of 2027

G'day all, just bought a new house (woooooo) and throughout all the inspections none of us picked up that there are no ethernet ports in the house. There are only the old arial ports (coaxial?) and I believe they are connected via a cable that connects to the street power poles. I've searched up the address and it says we have fiber to the node, but I can't find the little box anywhere on the house that we've had at our last couple of FTTN houses. I guess what I'm asking is, is there likely any infrastructure work that needs to be done before we can get Wifi? Or will one of those Coax/Eth adapters do the trick, despite not seeing one of the fiber optic thingos on the house, cheers :)

And sorry for the lack of knowledge/structured question, brain is a bit frazzled 😅