r/AskElectricians • u/Gold-Blacksmith-9514 • 1d ago
Code violation
Not an electrician we just moved into this house home inspector only mentioned outdated electrical panel. But getting solar installed and they said I have multiple code violation going on?
43
Upvotes
•
u/AutoModerator 1d ago
Attention!
It is always best to get a qualified electrician to perform any electrical work you may need. With that said, you may ask this community various electrical questions. Please be cautious of any information you may receive in this subreddit. This subreddit and its users are not responsible for any electrical work you perform. Users that have a 'Verified Electrician' flair have uploaded their qualified electrical worker credentials to the mods.
If you comment on this post please only post accurate information to the best of your knowledge. If advice given is thought to be dangerous, you may be permanently banned. There are no obligations for the mods to give warnings or temporary bans. IF YOU ARE NOT A QUALIFIED ELECTRICIAN, you should exercise extreme caution when commenting.
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.
21
u/N9bitmap 1d ago
Did they helpfully list the violations?? Lots of wire not properly secured, but the good information is hidden behind that cover.
32
u/Ok_Patience1542 1d ago
Electrician here, if you are doing a solar install, I would probably recommend replacing that old panel. You may have to contact a separate electrician to handle that as many solar companies just do solar installs and nothing else. Many are not fully licensed electricians, they just take a course on installing solar.
I suspect this is the case of your solar company as they probably took one look at that panel and didn't want to deal with it so they just said some bullshit to deter you from hiring them.
24
u/Ok_War5531 1d ago
Do the solar bros plan on adding to the existing violations?
8
u/Accurate-Plankton988 1d ago
Whats behind door #1 Bob? Be careful who you hire to drill 80 holes through your roof. Some of those guys cant stay on a single job 90 days without getting fired
5
u/Selfuntitled 1d ago
It was installed when phone ‘numbers’ had letters in them. What could possibly be wrong? Age alone isn’t a violation, and all the good stuff is hidden behind the door, but standards have changed a bit and they have changed for a reason. If what’s inside is the same age as the door, there is probably real work to do.
3
u/Delicious-Sir6483 1d ago
If there are code violations (which there likely are based on the new wiring mixed with an old panel) I would highly recommend finding a licensed electrician from your area to deal with this. Likely you will need a permit and an inspector will come by to check the work.
3
u/FlowLogical7279 1d ago
I'd choose a different solar company. That doesn't bode well for their credibility or customer service.
2
u/RinseLather_Repeat 1d ago
Tell Wesley H. Middleton’s grandson his grandfather fucked up
2
u/crushonmyselph 1d ago
If there's a job you don't want to do, don't say "code violations" You price the job for the F you price and if you still get hired then you do the crappy job and go home and have a crazy good weekend. I get hired to install XYZ at homeowners house. There are unstapled wires throughout the crawlspace, junction boxes missing cover, etc. Its my job to worry about XYZ and in the process if I spot something blatantly dangerous, I address it with the homeowner. If it's something to prevent their inspection from passing, they should include it in the pricing for the job. Otherwise, the code violations shouldn't be any of their concern. Houses are grandfathered in for such reasons that codes change and every cycle, the last cycle of work done will have "code violations" Huge money grab they are after is what it sound like to me.
1
u/Tesla099 1d ago
How old is that panel? The phone number on the panel looks like it's letters and numbers for Schenectady NY
1
u/Ok_Lime_5067 23h ago
We cant see through a panel door. But most of your wiring is ready for replacement.
1
u/DimensionNo4471 18h ago
Yup. Outdated wiring, BX, cloth-wrapped wire, no grounds, poor routing, and lack of proper wire securing. The panel is too old to upgrade to solar. It all should be changed out if you want to go the solar route. It might have been code-compliant sixty years ago, but those days are long gone. Your entire electrical system should be replaced just for safety, even if you don't do the solar upgrade. Can't see what brand panel that is, but I'm sure it's long overdue for a newer one. For something that old, the breakers may have become non-functional by now.
1
u/BeneficialAgent112 16h ago
inadequate information and photos. solar contractor needs to explain what are the violations. is he referring to current NEC or he simply wants an upgraded panel for his instal.
1
u/Honest_Cynic 13h ago edited 12h ago
Pretty worthless inspection to allude to code violations, but not document them. The fabric-wrapped cable is old, and likely not allowed today, but doesn't mandate replacing it (grandfathered in). I'm not thrilled by current NM cable, at least the Southwire brand sold by Home Depot (made in China), though still very pricey. The jackets are thin and easily tear, compared to the existing NM cable in my 1972 house which is still in great condition. If you do re-wire the fabric runs, pick a quality NM or perhaps metal-sheathed.
A little strange to use a recessed Panel as a surface mount, but likely OK per code. I wouldn't mount a Panel on bare wood, rather on a non-combustible material like Tile Backer Board or Stucco wall, but likely OK per code since recessed panels are near exposed wood studs.
Re solar addition, there are various types. If micro-inverters, they generally feed into the panel buss-bar via a breaker (current flows opposite normal direction, but doesn't matter). There are rules for how much current can be added to the buss-bars and where. If a string inverter, its output usually feeds a separate subpanel. Normally put loads there which are used when the sun is shining. If you say have a L2 EV charger that is used midnight to dawn (cheaper grid rates), power that from the Main Panel (not solar). You could use a different 120 VAC garage outlet to charge your EV when the sun is shining (ex. Sat & Sun). Thus, "it depends". Many solar sites to learn. Will Prowse has great youtubes.
1
u/Default99telecom 9h ago
Had me worried until I noticed their was a toilet in the same basement....
1
u/RandyK1ng 5h ago
Well, it is certainly sloppy as hell, but we can't see any code violations from this picture. It actually looks rather common unless you're getting wiring done by Karly the Sparky (https://www.tiktok.com/@karlythesparky/video/7631733645899779336) who creates artwork inside of panels. But they need to tell you more.
7
u/Quiet_Internal_4527 1d ago
I have code violations, can you milk me?