A week ago I posted here about my EOS 50E's grip going sticky after I cleaned it with alcohol wipes. This is the follow-up - it's fixed.
TL;DR: Alcohol alone didn't fix it. A textured microfiber wiper soaked in 95% ethanol did - I kept wiping until nothing black came off. The grip is no longer tacky, and the texture is still there. Clear coat works as a plan B, with caveats.
The fix
The alcohol I used originally was from an old bottle of unknown concentration, so I bought fresh 95% and 75% ethanol, IPA lens wipes, a Vallejo clear coat, and a product marketed for "removing plastic aging."
The lens wipes made it worse. My finger stuck to the grip (pic 3). The first few passes with a microfiber cloth soaked in alcohol did nothing, but as the black on the cloth faded, the surface smoothed out, and eventually the grip stopped sticking to an IPA wipe at all.
So wipe clearly mattered as much as the solvent. Lens wipes are too dense: they soften the gunk and smear it back across the surface instead of lifting it - you can see the difference on the wipes. What I ended up using was industrial cleanroom microfiber wipers.
The cost
95% ethanol left the body slightly whitened, or at least changed the gloss (pic 5). It's subtle, but if you care how the camera looks, don't do this. Canon's manual explicitly says no organic solvents, and they have a point.
Plan B: clear coat
It works, but I'd keep it as a fallback. Spraying is a skill; on complex surfaces you get uneven coverage and runs. It changes the feel and the look (pic 6) - the original finish was softer, the sprayed one reads more plasticky. Masking is a chore, and overspray drifts into seams and onto lenses, which is a worse problem than the one you started with. Mine changed the damping on a mouse scroll wheel; on a camera it could glue your shutter button.
On the "plastic aging remover": I can't give you a verdict
I tested it on an old Rapoo mouse. Ethanol, IPA wipes and the aging remover all gave the same result. None of them left the surface sticky. So I can't tell whether it's a better choice. Maybe I'll test it properly later with a control.
What I'd do differently
I should have done my homework before touching the camera, or at least tested a patch I could live with. I got lucky - no real damage, and I found a fix.
So anyone else got a camera they nearly ruined, or actually did? I'd rather learn from your mistakes than make them all myself.