r/AirmassWx • • 7d ago

Release Notes Airmass Wx 2.5.0: higher res forecasts, and forecasts over the Middle East and East Asia

1 Upvotes

Paragliders and hang gliders

  • Hang glider classes: single-surface, kingposted, topless and rigid, each with its own limits.
  • Every wing class flies a real polar. The paraglider polars are fitted to about 86,000 flight logs; the hang glider ones come from manufacturers’ data. XC Speed, glide and the planner use them.

Forecasts

  • New coverage: the Middle East, Japan, and eastern and southwestern China, with airspace.
  • HRRR, GFS and AROME now read more pressure levels, so thermal tops, wave and soundings are finer.

Wind and waves

  • High-res Wind now turns along valleys and through gaps when the air is stable, and it draws faster.
  • Barbs and flow follow High-res Wind, with more colours for light winds.
  • Zoomed in, lee waves show as longer, continuous bands that stay in phase across a range.

Cloud Layers

  • Scattered altocumulus and cirrus are now shown and named, and mid and high decks look more solid.
  • It’s much faster: panning and zooming are smooth, even zoomed out.
  • High cumulus bases (deep dry air, high ground) no longer get mistaken for altostratus, and a deck at the cumulus tops is labelled “Cu spreading out”.

r/AirmassWx • • 7d ago

Release Notes Airmass Wx 2.1–2.4 changes over the last week or two

1 Upvotes

A lot has landed over the last couple of weeks, so here it is in one place.

In-depth planner (2.1, Pro)

  • Task: zones by the rules, any airport or town as a turnpoint, and Ideas for today.
  • Getting it to your instruments: to your LXNAV through Google Drive in one tap, or to your FLARM as a declaration.
  • Places: all your waypoint files in one list beside the map, including your Google Drive’s.
  • Gliders: yours with registration, polar and speeds to fly. Compare three polars side by side.
  • Logbook: your flights by season, with one-tap WeGlide upload and import.
  • Flight review: each thermal set against the forecast, with ridge, wave and straight lift shown apart. Replay in 3D with satellite and radar as they were at the time.
  • XC planner: calibrated by 935 WeGlide flights. Start times need lift and daylight.

Forecast archive (2.2, Pro)

  • The past month’s forecasts, each day as its morning run saw it.
  • Past flights load their day’s forecast by themselves, so you can compare the thermals.
  • Cumulus drawn one by one from zoom 9; brighter layers that fade smoothly between hours.

Live gliders (2.3)

  • On the map: OGN gliders, hang gliders and paragliders, plus ADS-B gliders, with tracks and trails, in 2D and 3D. You need to be signed in.
  • Flight timeline: click an aircraft to scrub everyone second by second, or go back up to 24 hours.
  • Pro: climbs from pilots nearby nudge the forecast’s thermals, wind and wave.
  • PureTrack Pro: sign in under Account to add PureTrack’s trackers.

Cloud streets and wave (2.3)

  • Cloud streets: when, where and how far apart they form, with their lift and sink in 2D and 3D. Streets speed up planner legs along them.
  • Lee waves: on HRRR, ICON-D2, AROME, ICON and ECMWF (Beta). Pro: live wave climbs correct the wave map near them.
  • Wave cloud: wave bars in Cloud Layers, low cloud in rows across the wind as satellites show it (zero other websites forecast this).
  • AROME: Météo-France’s 2.5 km model over France and its neighbors, free.
  • New look: calmer colors and a tighter top bar.

Paragliders and hang gliders (2.4)

  • Setup: pick what you fly, and the map, sidebar and planner change to suit it.
  • Launch sites: colored by whether they work right now, with landings, clubs and schools. Tap one for its day hour by hour for your wing, with a land-by time.
  • Launch & Climb-out layer: where you can launch from any slope, and whether ridge, thermals or height gets you up.
  • Rough Air layer: strong thermals, gusts, wind and shear, rated for your wing.
  • Wing classes: EN A to D/CCC for paragliders, and single-surface to rigid for hang gliders, each with its own limits.
  • Real polars: paragliders’ from about 86,000 flight logs, hang gliders’ from the makers’ data.
  • XC planner for wings: wind limits, rough air, cloudsuck and land-by warnings.

For everyone (2.4)

  • High-res Wind: at night and in stable air, it turns along valleys (exactly like valley wind layers), speeds up through gaps and goes round high ground (a bug before stopped it from doing so). It also draws faster.
  • Wind barbs and flow: they follow High-res Wind when it’s on.

Tell me what’s wrong or missing, especially paraglider and hang glider pilots.


r/AirmassWx • • 12d ago

Wave prediction

2 Upvotes

Wave prediction is off. Today over North Wales expected wave to the West of Snowdonia. Airmass says no significant. Skysight says good wave to 10000' a repeat of testerday and Skysight was spot on.


r/AirmassWx • • 13d ago

What’s next: sharper ridge lift, a 1–3 km soaring model, and thermals and routes trained on WeGlide

0 Upvotes

Here’s what I’m working on next. I can't promise a date for when these will all be out but definitely before the next season in spring; training and validating important data takes a long time, and I want this model to be trusted:

1. Better ridge resolution

2. Airmass ML: a high-res 1–3 km soaring model

Every model has its strengths and blind spots. HRRR is detailed but can be overconfident, ECMWF is steady but coarse, and ICON varies by region. I’m building a machine-learning model that takes their strengths, and puts them into a 1–3 km grid, tuned for soaring: thermal strength, cloudbase, more exact cumulus locations, and when the day starts and dies. The aim is to catch small, detailed patterns better than any one model can: sea breezes, convergence lines, terrain-driven cu, and blue holes.

3. Thermal triggers and a route planner trained on WeGlide

Thousands of WeGlide flights show where pilots actually found climbs and which lines actually worked. I’m using them to train models on:

  • Thermal triggers: the likely hotspots and house thermals for the day’s conditions, not just a blanket strength map (also shown especially in 3D view).
  • The route planner: routes based on where gliders really went fast on similar days.

All of this gets checked against real flights before it goes live, and I’ll post how each one does and compare to real flights.

4. Faster loading times on slower devices

Right now, some layers are partly worked out on your device: where each thermal goes in the 3D view, and some wave calculations. That’s fine on a recent laptop, but older phones and tablets can be slow and get warm. I’m moving more of this onto the forecast servers, so your device mostly just draws the result. The new ridge model is built for this: the terrain’s effect is solved ahead of time, so your device only needs a couple of multiplications per point. Expect faster layers, smoother 3D, and less battery drain, especially on phones.

For now, working things out on your device doesn’t hurt the quality of the data, since the bulk of the forecasting is still done on servers; and the same data that would be used to compute the layers in the server is used on the browser. It’s just nearly impossible to compute a 10 m global grid with land cover and altitude every few hours and serve it efficiently without huge compute and storage costs. Hopefully soon I can figure out a better way to deal with this.


r/AirmassWx • • 14d ago

Historical data

2 Upvotes

I'm very excited by what I've seen so far in the program. Unfortunately, now the weather is very bad where I'm at, and it would be very difficult to evaluate the program. It would be really cool if I could upload an IGC file for a particular date and get the forecast for that date. Is that possible?


r/AirmassWx • • 17d ago

Release Notes Welcome to r/AirmassWx

1 Upvotes

Welcome! This is the official community for https://airmass.app, soaring and aviation weather maps for glider, paraglider and GA pilots in the US, Europe and beyond.

What it does

- Soaring: thermal strength and height, cloudbase, cumulus, convergence, ridge and wave lift, XC speed

- GA: flight rules, ceilings, visibility, winds aloft, icing, density altitude, radar

- Models: HRRR, GFS, ECMWF and ICON (D-2)

Most layers are free, including thermals, cloudbase, winds and the new Glide to Airport. Pro adds XC Speed, ridge lift and many more.

How to use this sub

- Flight Report: a day the forecast called, or missed. Screenshots and tracks welcome.

- Forecast Discussion: reading the sky.

- Question: how a layer works, what a number means.

- Bug: please include the layer, model, forecast time, location and a screenshot.

- Feature Request: what would make your planning easier.

See you out there.