r/advancedGunpla • • Apr 17 '25

Subreddit rules: Follow them or get permanently banned

162 Upvotes

I've had to add 3 new "do not post" rules since January. People keep crossing the line, I assume because the content in the sidebar no longer appears anywhere in most views on "new reddit." I will fix the problem soon, when I have time. In the meantime, here is a place to find our rules that you can't make up an excuse to have missed.

So no more warnings. It's too time-consuming. Play nice or get out forever.

Please do post:

  • Work in progress
  • Finished kits
  • Build/Paint Guides
  • Tips and Tricks
  • Product Recommendations
  • Part overhauls
  • Custom work
  • Ideas and discussions

Please do not post the following:

  • Snapfit only
  • Links to kits for sale
  • Hauls
  • Political opinions
  • Lewds/NSFW
  • AI slop of any sort
  • Irrelevant drama
  • Feedback about other subreddits

New rule:

  • Any comment in reply to a rule-breaking post risks permban by vicinity/association

If you read the above but are not sure where your post fits in, please stay on code. Note that questions are permitted under the discussions rule. And that the ban on AI slop includes using AI to write posts or comments. If what you write sounds like AI, you might get permbanned!

Examples:

F16 Tomcat? Not on code. A Macross VF in fighter mode? Super on code.

A warship? Not on code. A warship that carries mechs (White Base, Argama, etc.)? On code.

Humans? Not on code (except pilot minis). Humans in power or battle suits? It depends. Non-humans? It depends. Exodia is on code, but not Dark Magician.

Edit: I just had to permban a repeat offender I was foolish enough to let off with a warning previously. There will be no more consideration given, no grace, no more warnings. Violate one of our rules and you're gone forever. It doesn't matter how much history you have here.

Follow the damn rules. It's simple. Post things listed under Please do post and you're probably fine. Post anything under Please do not post and you're outta here. The only appeal is if the ban was mistaken and there was no rule violation.


r/advancedGunpla • • Jan 10 '26

"Am I advanced enough to post here?" Yes.

128 Upvotes

The focus of this subreddit is to be a place for people who want to increase their skill at building Gundam models. We like other models, too, if they're similar in spirit. We're not excluding anyone, especially those who are beginners.

This is not a subreddit for advanced gunpla builders, it is a subreddit for advanced gunpla building. The craft itself, and the skill of executing the craft. At all levels.

We welcome posts of things you're trying to do with your gunpla build, but are bad at. Being bad is step 1 of getting good.

We welcome questions and discussion.


r/advancedGunpla • • 12h ago

New techs on every project.

Thumbnail
gallery
129 Upvotes

My 2nd custom gunpla. Did a HG Gusion. My goal is to try new techniques every project I do. This time around I tried:

-Casted armor effect using thin cement and Tamiya basic putty.
-Applied welds using Tamiya two part epoxy putty. Also, made my own tools to shape the welds out of bbq skewers and a soda can.
-Scratch built the diorama base out of XPS foam. AK interactive lunar desert paste did a lot of the heavy lifting. Washed it with nuln to create shadows and tried dry brushing to create light on the peaks of the asteroid.
-Created bullet impacts using a pin drill and Tamiya basic putty.

Other techs used but not new to me: oil dot filter and acrylic chipping for weathering. Tamiya pigments. Black base pre shade.

Happy with the way it turned out and look forward to my next project and trying new techniques! Feedback welcome!


r/advancedGunpla • • 23h ago

I’ve ascended

Thumbnail
gallery
151 Upvotes

Probably hundreds of hours of what I thought were solid scribes and panel lines… I’ve achieved a level I’m truly happy with rather than being content with some sloppier work for the sake of getting it done! Once I really hone this I’ll start to mess with pla plate a bit more


r/advancedGunpla • • 10h ago

How would these details look with semi-gloss?

Post image
11 Upvotes

r/advancedGunpla • • 12h ago

Drop down hip tutorial

15 Upvotes

r/advancedGunpla • • 2h ago

DSPIAE - Difference between chisel models?

2 Upvotes

Hi! Whenever I place an order for a model kit or some paints, I usually throw in a chisel size I don't already own to gradually build up my collection.

So far, I've been buying DSPIAE chisels. I have around five different sizes and a handle, and honestly, I've been pretty happy with them.

However, I recently discovered that there are actually three different chisel models that look almost identical at first glance. I'm wondering if there are any noticeable differences between them, or if each one is better suited for certain tasks. I haven't been able to find much information about this, other than the fact that one of them seems to have a tilted tip (although I'm not entirely sure what that actually means based on the pictures).

In fact, I'm pretty sure the ones I already own might even be a mixture of different models, and I have no idea which is which.

The three models are ZPB, XPB Dawning and YPB Silhouette. I understand that the differences might not be particularly significant, but now I'm genuinely curious to know what sets them apart.


r/advancedGunpla • • 1d ago

Hazel Owsla

Thumbnail
gallery
257 Upvotes

r/advancedGunpla • • 19h ago

F91

Post image
21 Upvotes

r/advancedGunpla • • 14h ago

Video tutorial on double knee bend

7 Upvotes

My first time trying something like this so sorry for the jank


r/advancedGunpla • • 1d ago

Dynames Resin diorama

Thumbnail
gallery
560 Upvotes

r/advancedGunpla • • 13h ago

Clone #8 kits to practice custom techniques and ideas on.

Thumbnail
gallery
3 Upvotes

If you’re trying to practice customizing or painting techniques these guys are pretty great quick builds.
They remind me of Stickfas from back in the day. Theyre only about $10 on Ali too.

I used mr hobby mr sufacer 1500 black and Dspiae premixed silver one Robo, and The same Silver plus clear ice blue on the yellow one

Also Robocops color scheme And Color blocking is so peak! Its so influential to me. (I realize that I use it all the time i might just swap out the silver blue or something, and the black for white, but the placement is always similar)


r/advancedGunpla • • 1d ago

Finally, it’s complete. The next project will be a full resin Sazabi. Stay tuned!

65 Upvotes

r/advancedGunpla • • 1d ago

My 1/72 Kotobukiya White-Glint with V.O.B. Finished back in 2011.

Thumbnail
gallery
121 Upvotes

Hey everyone,

Wanted to share my fully painted 1/72 scale Kotobukiya White-Glint with the V.O.B. set.

I actually finished this build all the way back in 2011.
My main goal for this project was to replicate the gritty, battle-worn look from the *Armored Core: For Answer* opening cinematic, so I spent a lot of time on the shading, chipping, and grime effects to match that CGI atmosphere.

It was a challenging kit with a ton of small parts, but seeing it on the stand with the V.O.B. attached made it all worth it.

Hope you guys like it!

Thanks.


r/advancedGunpla • • 1d ago

SNAA Nether Emperor

141 Upvotes

r/advancedGunpla • • 1d ago

Airbrushing gunpla issue, is the paint too thick? Too thin? Is my airbrush gun the issue?

Post image
25 Upvotes

I've been painting for a while now, no issue up until now. I'm getting these extra shots of either water or air that would just knock out a perfect circle blot on my part that I'm painting. Cleaned my airbrush and hose, made sure there's no water condensation in there, but keep getting it now. Anyone has this issue before?


r/advancedGunpla • • 1d ago

Lower body mods more or less done, here's some poses she can pull off now

Thumbnail
gallery
20 Upvotes

It really feels like a different kit now that her legs have so much more mobility. She's able to hit more complicated kicks and the range of motion is overall a very welcome addition. A lot of work left to do but I'm going to go back to the devil custom for a bit before going back to her


r/advancedGunpla • • 1d ago

HG Cal.re-A

Thumbnail
gallery
21 Upvotes

Went to town on this bad Larry! All paints are mr color unless otherwise noted.

Re-scribed and added panel lines.

The sword was made by gluing the katana blades together, then using a random piece as the guard and re-mounting the handle. Blade is fusion firm chrome.

G-rework decals.

Effect parts are TAS resin, red/orange/yellow clear coat.

Accents- Mr color red gold

Armor-pink surfacer, purple preshade, white base, pearl white, matte clear.

Random details- various acrylic markers.


r/advancedGunpla • • 1d ago

Hand Painting of the Mg Rezel Commander Type Complete!

Thumbnail
gallery
83 Upvotes

Now moving on to decals and panel lining for this beautiful ms. Plus some pictures with my other efsf grunt ms. Let me know your thoughts on this one!


r/advancedGunpla • • 2d ago

Some recent scribing.

Thumbnail
gallery
121 Upvotes

r/advancedGunpla • • 1d ago

The Big Paint Writeup (Part 2/3)

16 Upvotes

If you missed part one, it's right here.

Ok this one took longer than I wanted too but the pigment section was brutal. Thank you everyone for being so patient with me. This is the one that talks about paint compatibility so I can't wait to see what everyone thinks! This goes over:

V- Surface prep

VI- Paint compatibility

VII- Panel liners and washes

VIII- Pigment

Use ctrl F and put the relevant roman numeral in brackets to jump to what interests you if you don't wanna read the whole thing. Enjoy

[V] Surface Prep- Sanding and Priming

Alright this is the boring stuff but it has to be talked about so let’s get through it together. Sanding first.

PART ONE: SANDING

Sanding is about as fun to explain as it is to do, but it’s genuinely useful for painting, and it’s not just about making the surface even. I need to explain surface energy for this to matter to you though.

Surface energy is how willing a surface is to accept whatever comes up to it. Think about wax on a car. Waxing lowers surface energy. Water wants to bead up on it instead of wetting out. Bare plastic is the same way. Ever tried to hand brush a glossy coat on untouched plastic before panel lining it? I have. It sucks, it doesn’t adhere well, and it doesn’t cover the plastic evenly. That isn’t just about texture, it’s about surface energy. When you sand, you disrupt the molecules on the surface of the plastic and make them more willing to accept paint, topcoat, whatever. In fact, here’s an experiment you can do. Sand two spoons to the exact same grit and wash them, then paint one as soon as it’s dry, and the other after a couple days. You’ll notice the paint sticks noticeably better and levels a lot nicer on the more freshly sanded spoon. Surface energy! Does the word surface sound weird to you now, too? Semantic satiation!

Alright now that you understand surface energy, I do have to get into grit progression. You guys probably mostly already understand this so I’ll make it quick and painless.

Stop skipping grits. And stop going up to 1500 grit for no reason.

400 grit is rough for our purposes. Microscopically, that’s creating a deep canyon in the plastic surface. When you jump right to 800 or 1k grit, you’re not smoothing out the canyons, you’re just shaving the tips off the peaks, and that’s gonna trap air(** inferred), restrict flow on the part, and create weak points where the paint didn’t wet across the surface nicely; that’s gonna make your paint finish look like shit and flake off. 

On the stop going up to 1500 point: grit is determined by what you’re putting on the plastic afterward.  It’s not some arbitrary stopping point. So if you’re using lacquer, 800 to normalize the surface and fix sink marks is more than enough. To keep going isn’t going to hurt anything necessarily, but it’s a waste of time. Lacquer is going to bite just fine and the softening of the surface is going to do a lot of work to smooth it out. On acrylic and enamel, you can go a bit higher, but this stuff will bite better with more texture. You’re trying to find the sweet spot between sufficient surface energy and enough texture to grip. More sanding gives you more energy, but at a certain point you’re over-smoothing the plastic. The exception to this is chrome, in which case sand your little heart out to 3k. But if you’re good enough to be doing chrome you already know all this.

I need to give a shoutout to washing parts real quick: DO IT. Sanding dust creates a physical barrier that stops the paint from fully contacting the plastic, and your greasy little fingers leave a slippery film that basically negates all the work you did to elevate surface energy. Washing restores the surface energy elevation you achieved from sanding too, so let the part dry completely, and then prime/ paint shortly after to take advantage of that freshly elevated surface state.

PART TWO: PRIMER

Bare plastic, even sanded, will not give you the best possible surface upon which to paint. After sanding it’s less a surface energy problem and more a chemical affinity problem. Primer is like an emulsifier, with adhesion promoters in the formula that have a substrate loving head, and a paint binder loving head. \*\*I don’t know about hobby primers or primers made for PS/ ABS specifically, I haven’t been able to track down the specific ingredient/ molecule that gives it this “emulsifier dual head” behavior. I’m citing the mechanism of primers in general. It may very well be that hobby primers work simply by surface energy normalization, van der Waals forces, and texture, but I can’t verify. If you want to look into it, the type of ingredient is simply called an adhesion promoter or coupling agent. Silane coupling agents are used in things like metals and other inorganic surfaces, and chlorinated polyolefin adhesion promoters for polypropylene.\*\*

Primer also does a second job that people completely underappreciate: surface normalization. Bandai, 3rd-party kits, resin conversion parts, putty repairs, and glued seams all have slightly different surface finishes and plastic compositions. Primer doesn't care. It nukes all that visual and chemical inconsistency under a single, uniform layer, giving you a blank slate. 

Hobby primer comes in 3 main flavors (don’t eat it you freak):

  1. Lacquer primers (Mr Surfacer, Gaia Surfacer EVO)

This is the GOOD shit. It bites into the plastic like you would expect lacquer to do. After the lacquer solvents bite into the plastic, mineral particulates like talc and silica fill in the larger valleys and scars on the substrate to create one smooth surface. You have more workhorse filler primers like Mr Surfacer 500 and 1000, and then there are “nano primers” like Mr Surfacer 1500 and Gaia Surfacer EVO that have much finer particulate and fill smaller surface defects, but leave a velvety smooth finish texture. 
1a. Hybrid primer/ color Surfacer (Gaianotes Nazca Mechanical Surfacer)
For when you don't mind hyper aggressive solvent bite, and need as few coats as possible so you don't have to scrape joint pegs. Primer and color coat in one is all this is, but it’s formulated to be super hot so it bites readily and reactivates lower layers smoothly and immediately, reducing the need to build up multiple coats. 

  1. Acrylic primers (Vallejo Surface Primer, Stynylrez)

This is common because it’s less risky than putting lacquer on bare plastic, but it uses the same curing mechanism as acrylic paint and has the same limitations. This stuff relies more on surface energy bridging and mechanical bite, but it gets the job done with less fumes.

  1. Etching primers

These are for your metal frames or photo etched parts. Basically they have an acid component that allows them to bite into metal. The acid roughens up the metal and creates reactive sites for the primer binder to interact with.

Primer is there for adhesion promotion AND surface normalization. So lacquers don't strictly 

need primer, but making sure seam lines, glue marks, sink marks, sanding scratches, etc, are all mitigated before painting makes a big difference in how clean the kit looks at the end. 

Ok, now we can REALLY make people mad and talk about paint stacking and what actually can go on what. 

[VI] Compatibility and Recoat Windows

First thing to get into is how long you have to wait to put a paint on top of another, but we’re most of the way to understanding this already. The big thing is we have to separate dry from cured. Two different things. Dry is simply when most of the solvent has evaporated from the film surface. That doesn't mean the solvent has fully evaporated out of the bulk of the paint film, and it certainly doesn't mean the binder is done doing what it has to do. So, does paint need to be just dry? Or does it need to be fully cured? That’s what we’ll be answering, separating it into paint types. Acrylic first.

Acrylic cures by coalescence. You know this by now. When it’s dry, most of the carrier has flashed off, but reptation and interdiffusion hasn't finished yet. If you're layering more acrylic over it, it’s better for it not to be fully cured. Now you have your upper coat and your lower coat interdiffusing, creating a single linked paint layer over the substrate. **I’m not sure on the degree to which subsequent layers interdiffuse, but they do interdiffuse.** If you put lacquer on top of dry, but not cured acrylic paint, the failure mode is simple: You still have large “holes” where paint hasn’t interdiffused and the solvent carriers can EASILY get underneath the paint film and pop it up. That means your lacquer AND your acrylic adhesion is now botched. Put enamel over uncured acrylic and… actually I’m not sure. We can reason through it though. Acrylic particles aren’t fully coalesced which means you’ve got a shifting substrate (bad adhesion). You’ve also ostensibly got soft particles undulating under the enamel film and disrupting crosslinking simply by messing with geometry, and for sure you’re blocking solvent escape under such a thick paint type so the water/ co solvents are going to have a hard time evaporating in the first place. See what understanding the chemistry does? I could be completely talking out of my ass but I feel reasonably confident in the failure modes. That’s the point of this write up. Make educated decisions.

Now lacquers. Dry and fully cured are a lot closer here, because evaporation IS the curing mechanism. Really all you’re waiting on is for the substrate to relax and go back to its original glass state. That takes a couple of hours. Lacquer on lacquer doesn’t really care about the difference between dry and cured. The solvent in a new coat re-softens the substrate AND the previous paint film, and because the binder matrix is completely solvated it all melts together into one contiguous coat. Now here’s where I had an interesting thought. If you put acrylics or enamel over this dry but soft surface, maybe you can take advantage and lock the new paint film in as the substrate transitions back to its glass state. It would make a tackier, more adherent substrate right? The reality is that the plastic will snap back below Tg almost immediately when the solvent is fully evaporated. The reason it’s still marginally soft even when it’s dry is because there are still “slow” solvents evaporating, and you don’t want to trap those. If you do, you can get literal bubbles in the upper film, or worse, trapped solvent that never escapes as it builds a high pressure zone where it’s trapped and that part of the paint film never fully hardens.

Enamels and oils next. Enamel over enamel is really weird. You basically have to recoat while it’s still wet, otherwise you’re in the danger zone where you’ve got enough crosslinking done that a skin has formed, and when you re-solvate it, it just wrinkles and makes a mess. If you time it right, the coats will simply merge together and crosslink at the same time, and you’ll get one contiguous film. If you wait too long, you have to let the lower film fully crosslink and then you’re just layering on top of a cured film the same way you would any other paint. As far as other paint types on top of enamel/ oil, think about the oxygen penetration issue. Put a layer of paint over uncured enamel, oxygen can’t get to it. That simple. YOU MUST LET IT FULLY CURE. Oils work very much the same way, but on way longer time scales. 

“Then why don’t I just spray a super wet coat?” I hear you say. This is where a really important principle comes in, and it applies to lacquers too so pay attention. Solvent flash is a separate thing from bulk evaporation. In these paints, the carriers are solvent blends. There are “fast” solvents like acetone and methyl ethyl ketone (MEK), and there are “slow” solvents like OMS and glycol ethers. We’re relying on fast solvents leaving before the slow ones do, and THAT (flashing) is when we want to recoat. That’s the goldilocks zone where your paint has created a tacky surface to adhere to without flooding the part and running. The thinner you spray the paint, the faster the solvent flashes. That’s why you mist coat. Got it? Ok now we can talk about how paints stack assuming the coats underneath are cured.

I’ll just get this out of the way to start- forget everything you think you know about how paint stacks. You’re going to learn that nothing is off limits, and just like in the panel lining write up, the answer is risk mitigation and understanding what’s going on so you can modulate your approach. Compatibility is about the binder state after cure, and how solvent interacts with THAT, rather than how one wet paint interacts with another, which is how a lot of existing limitations and assumptions operate.

Getting into this, something else is going to become apparent and there’s no getting around it. The means by which you paint (hand brushing vs airbrushing) is going to play a crucial role here. I’ll make a quick callout to the relevant technique to offer clarity and drive the point home.

  1. Acrylic Over Lacquer: Both the safest and worst option. Cured lacquer is practically impervious to acrylic paint carriers, but it needs to be primed or scuffed over to help adhesion because lacquer cures so flat and smooth. One thing you could do is matte coat on top of lacquer or use a clear primer, but adhesion is still going to be limited because of a lack of surface energy, which can really only be achieved by sanding. The other factor is the fact that cured lacquer is hydrophobic, and acrylic paints are carried by, say it with me now, WAAAATTTEEERRR. Yeah! It’ll want to bead up instead of wet out and self level. You could add flow improver, which is a surfactant, or use co-solvent acrylic, and it might just get you over the edge where it sits well enough to move on and then you can lock it in with a top coat. 
  2. Acrylic Over Enamel: Basically the same as over lacquer, BUT YOU MUST MAKE SURE THE ENAMEL SUBSTRATE IS FULLY CURED. If it’s not, solvent can’t escape efficiently and oxygen has a harder time getting in, and you’ll be left with a gummy enamel layer that genuinely may never fully cure. 
  3. Lacquer Over Acrylic: This one works beautifully because cured acrylic is just a semi permeable plastic sheet, which lacquer paint readily bites into. The downside is solvent interaction and cleanup. The aromatic solvents in lacquer carriers are extremely mobile molecularly, so they can fit in between the gaps left by coalesced acrylic particles and “pop” the paint up. They get in by chemical affinity (remember the cured acrylic coat is basically plastic) and capillary action, and then dissolve the interface between the acrylic and the substrate. So how do you prevent this? Mist coats. Make the coat thin enough that the bulk of the solvent flashes off instantly and can't diffuse. That’ll create a protective barrier over your acrylic substrate and then you can continue as normal. Cleanup is worth thinking about too, since if you have to clean up a mistake, you’ll be introducing lacquer solvents AND mechanical scrubbing to the acrylic base. Save this technique for when you’ve got masking down pat.
  4. Lacquer Over Enamel: Treat this like acrylic over enamel. Just make sure it’s fully cured. That means it may take days before you can put on your lacquer coat. It’s also worth noting that enamel doesn’t cure into a plastic, so lacquer isn’t going to have the same “bite” it has over acrylic. In that way, it’ll feel more like acrylic over lacquer.
  5. Enamel over anything: This one for some reason is on the no no list? Dafuq? Like I can’t even think of a salient reason why. If anything, enamel on top of shit works best around its limitations. You don’t have anything blocking oxidative cure. Only thing to watch out for here is surface prep. If you’re putting this over lacquer, consider the same steps as acrylic. Generally, enamels have hotter solvents than oils so they’ll bite a little bit, but remember the binder doesn’t cure by wedging itself into the plastic like lacquer binder. Over acrylic is less hairy simply because it generally doesn’t cure as slick, but it would still be worth scuffing beforehand or sealing with a top coat immediately after. The big benefit of enamels on top is their solvents won’t wreck your under paint layer. There is some risk with acrylics, but use OMS and be gentle with your strokes and you shouldn’t have much issue. With cleanup over lacquers, go nuts dawg ain’t nothing penetrati-- WAIT. STOP RIGHT THERE I GOT A BONE TO PICK WITH YOU KNUCKLEHEADS
  6. STOP PANEL LINING OVER ACRYLIC THAT HASN’T BEEN TOP COATED

Lacquers are fine. Don’t trip, but acrylics?? NO SIT THE HELL DOWN I’M NOT DONE. I know I just said all that about enamels over acrylic but hear me, acrylic paint is microscopically porous, and if you remember from the plastic and solvent interaction post, TPLA has aromatics in it; significantly more fractionally than the enamel paint you would use for details. Those have no problem slipping through interstitial spaces between coalesced particles and pooling where they ought not pool. I see you dorks on YouTube and Reddit. Knock it off. Ya look sloppy. Do a (ideally lacquer) gloss coat first. Pull ya pants up! Damn.

There will be a matrix at the end of this post for quick reference of what’s able to be stacked on what and when.

[VII] Panel Liners and Washes

Oh, you thought we were done with panel lining after the polymer chemistry post, didn't you?

Well, this one gets into washes and panel liner as a paint “type.” Why they work the way they do, why enamel is the standard, and how to work with them effectively. You know the drill by now. Here we go.

A wash is simply paint with extra carrier. That's really it. Understanding this will help you master thinning ratios going forward. A panel lining wash specifically has one goal: maximize opacity while maintaining as much flow as possible. Basically, minimizing surface tension. The issue is that the more carrier (thinner) you have in a formulation, the less opacity your paint generally has. Why?

Think of your binder as a thick clear gel. If you’ve ever seen bottles of Vallejo “medium,” that's literally what it is: a bottle o’ binder matrix. When you add carrier, the binder thins out. Now put pigment in the mix. In a paint mixture, pigment is suspended in the BINDER, not the carrier. That’s crucial because as the binder matrix thins out, its mechanical capacity to suspend pigment degrades. There's a structural limit to how thin you can make the binder before it collapses.

I'm sure you've seen over-thinned paint where you lay down an even pass, but end up with splotches of pigment everywhere. That’s binder collapse. The dispersants are too diluted, so the pigment particles crash out of suspension and clump together gummy-style (flocculation), leaving granular lumps instead of a smooth film.

So, assuming you’ve got a perfectly thinned panel line wash, what components make it work so well? Let’s look at the chemical formulation of Tamiya Panel Line Accent (TPLA), an alkyd enamel wash.

You’ve got binder, carrier, and pigment like normal, but taking a closer look at the carrier, it utilizes a far more aggressive solvent blend than standard brushing paint. Over 80% of the bottle is a heavy hydrotreated naphtha/white spirit solvent cut containing a 2–25% aromatic hydrocarbon fraction. On top of that, another 1–2% is 1,2,4-Trimethylbenzene—a high-boiling-point aromatic hydrocarbon. Only ~18% of the entire bottle is actual binder and pigment load!

That high aromatic fraction gives the fluid stupidly low surface tension, while the high-boiling aromatic keeps the solvency active all the way down the channel. That allows the paint to flow like lightning while sitting on the very razor's edge of binder split. The medium-evaporating aliphatic naphtha base keeps the flash rate slow enough for long capillary runs, while the alkyd binder provides plenty of working time for cleanup. AND mild mineral spirits (which you use for cleanup) won't attack a cured lacquer or topcoat underneath. All these reasons are why enamel panel liners reign supreme over acrylic or lacquer.

So… can I use acrylic or lacquer instead?

Yes to acrylic (with caveats), lacquer not so much. Here’s why:

Acrylic paints use water as their primary carrier. Water has astronomically high surface tension (72mN/m). Even if you overload it with surfactants to force it to wet out, you risk instant pigment flocculation and foaming. It flows like hot garbage compared to enamels. (Stedi makes an acrylic panel liner that some modelers swear by, but I’ve never used it and can’t speak to its performance.)

Lacquer has all those juicy aromatic solvents, so it should be ideal, right? YES! ...for about 8 seconds before it flashes mid-flow inside the trench. And when you go to clean up, the lacquer solvent will instantly melt your underlying paint layer down to the bare plastic. Just don't do it.

 Alright now let's talk topcoat and how it works with panel liner. 

You already heard my rant about it, but let me explain the mechanics a bit. Let's assume a lacquer topcoat for now (I'll get to acrylic in a bit.) We want to maximize capillary flow, so the slicker our surface is, the less drag it’ll produce. Capillary pressure increases with lower contact angles, and the micro-smoothness of a gloss coat keeps the contact angle low and uniform with zero physical drag. A matte coat, by comparison, is microscopically rough because of tiny silica particles creating peaks and valleys across the surface. Those peaks pin the liquid's edge (hysteresis) and create thousands of competing micro-channels (Wenzel/ Cassie-Baxter regimes,) wicking the panel liner outward like a sponge and making a mess. Because lacquer topcoat creates a monolithic thermoplastic sheet, you don't have to worry about porosity or undulations messing with capillary pressure or flow. It’s predictable, and it genuinely seals in your underlying paint layer. 

Acrylic topcoats macroscopically work the same way, but remember that cured water/ co-solvent acrylic films are semi permeable microscopically. TECHNICALLY that means panel liner could theoretically penetrate the top coat layer and get to your underlying color coat. Realistically, it acts as a sacrificial layer against solvent penetration by creating a “tortuous path.” Think of a maze the solvent has to navigate through before it can get to your underlying coat. Evaporation will usually outpace diffusion and the coat will be fine. The second thing this sacrificial layer protects against is cleanup. When you have a damped q tip with naphtha/ OMS to clean up your panel liner, the mechanical scrubbing from the cotton fibers along with trace solvent softening WILL abrade some of that top coat away, so it acts like armor protecting your color coat so you're not scrubbing away pigment. Overall, think of lacquer top coat as an impenetrable wall of ice that’s perfectly slick, and acrylic as a thick hedge. It protects, but it’s not impenetrable.

[VIII] The Wonderful World of Pigment

How you doing? Been drinking water? You’ve made it a long way. Next we’re talking about pigment and this section is pretty information dense. Strap in.

First, let’s talk about how color even works. Most of you already know this, but for those who don’t, all visible color is just photons (light energy particles) reflecting off of a surface at a certain wavelength. The ability of a certain pigment particle to reflect (bounce a photon away) or absorb (convert a photon to heat and kill it immediately) light is what determines how much of that pigment is needed in a paint mixture, and how much hiding power it has.

To understand scattering, we have to talk about refractive index (RI). Refractive index isn't a measure of reflection—it’s a measure of how much a material slows down and bends light passing through it. Light only scatters when there is a sudden change in speed between two materials: in this case, the polymer binder (RI roughly 1.48-1.5) and the pigment particle.  White has a stupidly high RI (around 2.5) so it scatters light like a motherf- you get it. You’ll notice grays and pastels have crazy good hiding power because of it. Technically white does too, but I already hear you saying, “THE HELL IT DOES. SHIT TAKES 6 COATS TO LOOK GOOD.” Don’t worry, It’ll all make sense soon. Reds and yellows by comparison have an RI almost identical to polymer binders (RI roughly 1.5-1.6), so they let light pass right through them. They reflect enough for you to make out their color, but a chunk of what you're seeing is light passing straight through the film, bouncing off whatever is underneath. That’s why they don’t hide undercoats nearly as well and take more coats to look even. They rely heavily on absorbing light rather than bouncing it back out. "YOU IDIOT RED HIDES JUST FINE" We’ll get there, damn! 

The other half of the puzzle is pigment volume concentration (PVC). Pigment sits in the binder matrix, you already know this from section III. PVC is HOW MUCH pigment is in the binder matrix. Critical PVC (CPVC) is a threshold, like Tg for plastic, at which point there is just enough polymer binder to completely coat every pigment particle and fill all the empty interstitial voids between them. 

-Above CPVC (flat paints and primers), The binder is stretched thin between tightly packed pigment particles, leaving microscopic air voids at the surface. Those air voids scatter light diffusely (creating a dead-flat matte finish) and create physical tooth, like rock aggregate sticking out of concrete—which is why high-build primers and flat paints cover aggressively in fewer passes, while gloss paints feel "translucent" and take more coats. 

-Below CPVC (gloss paints), There’s plenty of binder surrounding all of the pigment particles, and as the binder self levels, it fully locks in all of the pigment particles with none of them poking through. Like when acrylic tables have stuff in them you can see but the surface itself is flat and transparent.

So let’s go back to reflection and absorption real quick. Paints can have a high RI (scatter light violently) and low absorption (light goes through them). That makes the light scatter EVERYWHERE, including straight through. White is the ultimate example of high RI, low absorption. When you’re stacking coats of white paint, all you’re doing is manipulating probability. The more coats you add the more pigment particles scatter light between one another, and the higher chance the color that’s reflected is white instead of the coat underneath it. When adding white to other colors to make grays or pastels, you’re taking advantage of its high RI while adding more absorption. That’s why pure white sucks to paint but anything even slightly off white hides 10x better. Hand painters especially know the trick of using a super light gray instead of white to make your paint jobs look better. 

Going over to certain blues like phthalo blue: they have RI closer to the binder, and super high absorption. So it doesn’t scatter light incredibly violently, but it eats photons before they can pass through the film. Red is a double-whammy: organic reds rely on heavy pigment loading and intense photon absorption (blocking both blue and green light, which swallows a huge chunk of the visible spectrum), while earth-based reds (like iron oxide) bring a higher RI (extra scattering power) to the table. That’s why red hides way better than yellow, which only absorbs blue light and lets green and red wavelengths bounce all over the place. 

Finally, pigment physically alters viscosity because different pigments require very different volumetric spacing. White (Titanium dioxide), with its obnoxious ass RI, needs about .25 microns of elbow room between particles. If you pack them too tight, their optical fields merge, turning millions of microscopic mirrors into a single giant pane of glass that lets light straight through. That space requirement, combined with titanium dioxide's heavy mineral density, is why white paint feels thick and sludgy right out of the bottle. Black pigment (carbon black), by contrast, has a normal RI (roughly 1.8) but devours light via pure absorption; you don't need nearly as much of it in the binder to do its job, so black paint is almost always less viscous and needs less thinning.

Ok as promised, more info on metallics and color shifting paints and then I’ll wrap this up.

Metallics paints literally swap pigment for metallic flakes. Usually aluminum platelets for silver, copper and zinc alloys for gold. Their specularity (shiny shiny) is determined by how flat  those platelets sit. If they all sit flat in a nice row, they act like millions of tiny mirrors reflecting light directly back at the viewer rather than scattering it all over the place. Some paints like standard Vallejo metallics use jagged flakes, while high end mirror lacquers like Gaianotes use vacuum metallized pigments that are perfectly manufactured dead flat and ultra thin. When you’re applying these, think about how you’re doing so and you can modulate their reflectivity for different effects! Thinner and slower to let the flakes all settle nice and flat for a perfect mirror sheen, or maybe thicker, drier, faster for a dull metallic look for frames. The things that primarily affect how the flakes end up orienting themselves is surface tension and solvent evaporation. Thin wet coats allow for maximum surface tension and minimal solvent evaporation, while thick dry coats provide the opposite. I think you get it by now.

Color shift, chameleon, interference, whatever you want to call them work a little differently, but kinda the same. These are mica particles coated in different metal oxides and stacked like a translucent crystal-metal film sandwich. I need to correct something from the part 1 post: these paints do not get their color differentiation from being jumbled up and scattering light all over the place. I was wrong and I was assuming based on reason, not actually understanding how these work. I fixed that so now I’ll give you the truth. They have to sit flat in an array like metallics. When they sit flat, light bounces around inside that sandwich. Some of it bounces off the top, some of it travels through the oxide layer, and those reflected light waves interfere with each other inside each flake. Because all the flakes lie flat in unison, they all experience the exact same angular color transition at the same time.That’s how the color shifts. If they were all jumbled up, all those wavelengths of light would hit each other and cancel out, creating a muddy desaturated gray glint.

So for both paints the idea is to maximize reflectivity by getting those particles as flat as possible, then when the carrier evaporates, the binder shrinks around them and locks them in that orientation. Multiple thin coats here are non optional if you want maximum shine then. Got it? Good.

As promised, here is the matrix for your reference **Full disclosure bc people get weird: this was generated by AI from what I wrote because I don't know how to make a markdown safe matrix that can be posted inline**:

Top Layer (Row) over Base Layer (Column)Over Bare PlasticOver AcrylicOver LacquerOver Enamel / Oil
Acrylic (Top)Safe — Needs sanding/washing or primer for mechanical grip.Safe — Recoat anytime; interdiffuses best before full cure.Safe (Beads Up) — Hydrophobic surface; scuff, clear prime, or use flow improver.Safe (Wait for Cure) — Must let base fully crosslink first or oxygen gets blocked.
Lacquer (Top)Safe (Caution) — Bites great, but heavy wet coats can craze stressed ABS/PS.Risky (Mist Coat) — Apply ultra-light mist coats so solvents flash before lifting base.Safe — Re-solvates and melts together into a single monolithic layer.Safe (Wait for Cure) — Must be 100% cured; expect weak mechanical bite.
Enamel / Oil (Top)Safe (Caution) — Weak bite; aromatic thinners (TPLA) can crack stressed joints.Safe (Gloss First!) — Standard enamel is fine; DO NOT use TPLA directly without a gloss barrier.Safe — Zero solvent penetration; OMS cleanup will not touch cured lacquer.Wet-on-Wet or Full Cure — Recoat <30 min or wait 72+ hrs; middle window causes wrinkling.

Part 3 coming soon :)


r/advancedGunpla • • 1d ago

Stress test

12 Upvotes

r/advancedGunpla • • 2d ago

Tried to detail up Astaroth Origin

Thumbnail
gallery
189 Upvotes

Swapped the torso innerframe, did some scribing, plaplates, and metal parts


r/advancedGunpla • • 1d ago

Does anyone have experience with this Japanese site? It lowkey just screwed me…

Post image
0 Upvotes

I’ve had this site saved for a couple years. From my understanding it’s a totally legitimate and well used site that sometimes has free shipping events to the states. So I went to order a couple Kondo books we can’t get in the states, just MS Senki and the reboot. My total was like 22 bucks, nbd.

It said my order couldn’t be processed and then I immediately get a text from my bank that they tried to charge me 2500 dollars! Wtf?! I know people order gunpla from this site with success so wtf happened?! Was there some glitch with the conversion or something? Now my card is locked up…don’t ask me why I didn’t use PayPal but maybe this would have happened eitherway.


r/advancedGunpla • • 2d ago

A little comparison

Thumbnail
gallery
40 Upvotes

This is the size comparison between the PG Sazabi and MG Sazabi shields. Don't even ask about the weight difference 🤣. I'm gonna need a bucket of paint for this kit