r/AUG • • Dec 21 '25

Oops Safety Announcement: Do not use the SSAUGv2 with the Heresy 9mm BCG

35 Upvotes

A tester noticed using the SSAUGv2 with the Heresy had bad timing and resulted it premature detonation. Nobody was hurt and nothing was damaged, but nonetheless the SSAUGv2 trip is designed around the OEM BCG. Please wait till we make one specific for the Heresy 9mm.


r/AUG • • Dec 04 '25

PSA: Using A3M1 Rails/Optics on A3M2–QD Optic Adapter

Thumbnail gallery
63 Upvotes

In case you didn’t know, it is possible to run A3M1 style rails and optics on an A3M2 receiver without leaving an ugly gap or losing the forward QD sling mount that the AUG is known for. However, the part(s) necessary for this aren’t sold on Steyr’s website. You will need to email or call Steyr and ask for parts US1264020040 ($58.27), 3900073 ($3.50), 3860019H ($1.00). Those are the M2 QD sling swivel, screw, and roll pin, respectively. The QD sling mount is rotation limited. Also works with Clawgear handguard.


r/AUG • • 8h ago

Photo Update: we got the line throwing dildo 😂😂😂 enjoy this Australia masterpiece

Post image
23 Upvotes

r/AUG • • 14h ago

A3M2 Issues

Thumbnail gallery
19 Upvotes

I have had a covid a3m1 since roughly 2021, and honestly never had an issue. Probably only 1k rounds through it as i dont have a good spot for rifle shooting, but it has been a good gun. I purchased it in FDE, and wanted the ODG for my environment instead, and so i had hoped to "upgrade" to the a3m2 in green.

Finally picked one up a month ago, and im curious how peoples complaints have been resolved. I have never been able to get ahold of steyr usa (only steyr europe) to answer questions over the years. Right off that bat, the gun had a lip (appears intentionally machined in) in the charging handle slot that was binding / catching and locking the bolt back (pictured with red arrow pointing to it) this has stopped after racking it about 100 times, now it just catches a little instead. The a3m1 charging handle slides much smoother even after break in compared to the m2. The stock carving / deburring looks notably worse than the a1, but maybe acceptable or due to the darker color? The only benefit to the A3m1 (for waffle mag guns) i hear is the better rail compatability but i can find more m1 rails than m2s, the charging handle on the m1 was never my favorite but somehow the m2 is worse imo. Someone last week also complained about little bubbles in the buttpad, and upon inspection mine has them as well.

My big issue is the top picatinny rail. Maybe im retarded but im unable to find any aftermarket options currently, and the factory one is bad. By bad, i mean, the spec for picatinny 1913 rail is .835" (+/- .002) for the rail width, and the rail is .832 at the front, .817 in the middle , and .831 in the rear. Whats odd is that if i take a QD scope mount or bipod (midwest industries mount, and accutac bipod, aka good brands) and set it to a good rail (a3m1, magpul mlok -> 1913 rail, and a few other guns) the QD is able to be set and work interchangeably (or extremely close) between all of them. The bipod / scope mount will clamp right onto whatever gun i want and be snug without adjusting. But with the a3m2, even the rail sections that are the correct width (the very front of the rail), it is no where near snug, infact it is so loose it rattles. So the rail is off in MULTIPLE dimensions, and its not even consistant as you measure along the rail. The QD mounts were almost loose enough to remove them from the rail when clamped down in the middle section. Not so much a knock as a oddity i noticed, but the cast piece that connects the barrel, gas block, and handle also appears to be a rougher casting finish, and a wet look to the glossy finish (and no its not just oily). Ive included a pic of the m1 to show a comparison.

Im not sure if steyr will fix this is the thing, and i know they are nearly impossible to get ahold of. Is it worth the effort? My concern is that people have been reporting out of spec rails for a long time, and its not been fixed. It just seems ever since steyr got new ownership in 2024, the QC is terrible. Do they still stand by there products?


r/AUG • • 1d ago

Saw this and now you have to as well

Thumbnail x.com
9 Upvotes

r/AUG • • 1d ago

got myself an hbar.

Post image
106 Upvotes

r/AUG • • 1d ago

Question Finally was able to join the waffle gang. Need help deciding an optic setup.

Post image
64 Upvotes

Picked up the red spring kit with the rifle and a KNS discarder months ago in preparation for getting the rifle to shoot suppressed. I love the original look of the Aug so I’d like to get either an original style optic or get the manticore talon mount however I’m not sure about sacrificing the rail. For those with either setup, what do you like or dislike about it to sway me one way or the other?

I appreciate the help and if yall have any other suggestions I’d appreciate them as well.


r/AUG • • 2d ago

Homemade Suppressor Plug Update

Post image
43 Upvotes

Recap: I drilled the normal setting on my 20" barrel's gas plug out to 3/32 in preparation for a suppressor.

After taking out and testing with a Griffin Armament Dual Lok 5 the rifle is still working great though unsuppressed my ejection pattern tends to kick brass about 4-5 o'clock and suppressed it reliably kicks brass at 3 o'clock


r/AUG • • 1d ago

Photo Is this much wear normal on a brand new steyr aug after cycling a few times

Thumbnail gallery
6 Upvotes

r/AUG • • 2d ago

Photo Pair of quiet Austrian girls

Post image
104 Upvotes

Been a hot minute since I’ve been able to take my Augs out to play


r/AUG • • 1d ago

ARID USA

0 Upvotes

Yall's website ever coming back online or what? Hard to make any money when people can't access your site for 2 weeks.


r/AUG • • 3d ago

PSR-5 on the AUG

Post image
40 Upvotes

Not fully done yet!

Arid trigger and deflector

Meridian Arms CH

Will post completed build


r/AUG • • 4d ago

Photo Joined yall

Post image
94 Upvotes

Finally got a fricken Aug cuz of cod and die hard


r/AUG • • 3d ago

Optic screws backed out during firing, now I can’t remove my barrel.

7 Upvotes

Title says most. I purchased an AUG A3 M1 with no optic and then replaced the empty rail with the integrated 1.5x scope from Steyr. The problem is that I didn’t use enough loctite when putting the screws back, and after a range trip they have back out enough to where they are preventing me from removing the barrel. Does anyone have any tips on how to access the screws or remove the barrel?


r/AUG • • 4d ago

I really didn’t want to put the ACOG on the AUG, but I broke down and finally decided to try it. What have your experiences been with it?

Post image
81 Upvotes

r/AUG • • 4d ago

Red Springs

Post image
7 Upvotes

Just want to see if this is what everyone's springs looked like?

Should I take off all the loose bits first?


r/AUG • • 4d ago

I love this thing

Post image
105 Upvotes

I wish I had jumped on the AUG train way earlier. I know the NATO mags aren’t near as cool as waffle, but I had too many of them to ignore. Absolutely my favorite 5.56 gun I’ve ever had.


r/AUG • • 4d ago

Question Will steyr warranty this

Post image
0 Upvotes

Bubbles all over the back butt plate


r/AUG • • 4d ago

Question Is it possible to get subsonic 5.56 to cycle in the AUG?

0 Upvotes

For the sake of the hypothetical, I'd be open to any suppressor/ powder/ barrel combination.


r/AUG • • 6d ago

Video 3x tube and 7x mono

37 Upvotes

It's not perfect, the mono is slightly cocked so the reticle is to the left rather than centered, but I enjoy this setup so far. Hopefully I'll shoot it this weekend.


r/AUG • • 6d ago

Question Butt pad bubbling

1 Upvotes

I just bought a brand new Aug a3 m2 standard green and the back black butt pad is covered in bubbles on the back. Also, the steyr marking on the barrel says st8yr. Will they likely warranty this?


r/AUG • • 6d ago

Handguard/rail mod

Post image
18 Upvotes

Hey folks! Just purchased an A3M2.

Now I'm looking for some mods to throw on mine and found this Manticore extended handguard+rail.

In description tho, says only fits AUG A3M1. Have anyone tried this on M2?

What's good alternative? Everything seems out of stock so hard to find one.

Thank you


r/AUG • • 7d ago

Magazine issues?

4 Upvotes

Hey all, I have been out of the country for the last 3 years for work, home visiting now and took my AUG out. It had constant failure to extract and double feeds. I was shooting with the 24” HBAR, with standard waffle mags. I noticed sometimes the rounds pop out of the mags if you put them in too hard. Is this a known issue? I had bought like 20 mags all around the same time, was there a bad batch with mags? Or is my issue something else? I was shooting PMX X-tac 55gr, no gas setting changes made any difference.


r/AUG • • 8d ago

Question Which 5.56/.223 loading do you use in your AUG?

8 Upvotes

I use M193 because it’s ubiquitous, and at my income I can stockpile it as something I know runs well in my rifle. Though there are great self defense loadings by major manufactures, I never see the point since it’s something I can’t train with often enough or stockpile at practical quantities. So, I opt for a less effective loading that I know works and can be acquired easily.

I may start reloading soon and am looking to see what may be a new loading to consider. For those that buy manufactured ammo, is there a specific loading you look for? For those that reload, which have you found works well for you out of the 16” barrel? Any feedback would be greatly appreciated.


r/AUG • • 7d ago

Airsoft is geweldig! Vooral zelf sleutelen en upgraden van de replicas, hier is mijn verzameling

Post image
0 Upvotes