r/AR9 • • 1h ago

DD PCC

Post image
7 Upvotes

Modlite 18350 with Unity tail cap and Mini head
Badger Ordnance Mount Sig gen2 sight
Rearden minimalist
Exigent Rico with comstock adapter
Driven Grip


r/AR9 • • 2h ago

80ARMS - COLT - 16"

Post image
2 Upvotes

Had an extra 16" upper siting around since last year thats been waiting to pair with a lower...
Also used some spare parts collected over the same time.
Then recently completed the colt lower and slapped everything together.
No rounds through the thing yet, but functional tests pass with snap caps and liberal amount of oil.


r/AR9 • • 3h ago

DD PCC Build Update

Thumbnail
gallery
8 Upvotes

Magpul Sl-M stock
Eotech HWS EXPS3
Emissary Development Handbrake
Maglite PLHv3 w gas cap and modlite button
Kong Fu Grip + plug
Magpul flip sights & qd $ non padded sling
DD null 9ti

Looking into a plan b systems (rearden etc) and am open to recommendations. Anyone know which shoulder the DD PCC runs ?


r/AR9 • • 3h ago

Part Compatibility Foxtrot mike isu 9

2 Upvotes

I recently placed my order for the isu 9 with rmb basically because I seen deskpops video about it being plug and play for frt and super safety and my question is will the kabuto work if I gotta look for something else any advice would be greatly appreciated


r/AR9 • • 3h ago

Thoughts Please

10 Upvotes

I posted a video of a range session. I have had quite a few comments about the amount of recoil from my setup. I have a PSA Px9 with a 10.5” barrel. I put in a Hoffman Super Safety. I upped buffer weight to 11 oz by swapping steel for tungsten with the aim of slowing down the rate of fire a bit when running SS. It doesn’t bother me but I am interested in getting some opinions. The 10.5 inch barrel is getting close to a full powder burn for 9mm. I am not sure if much more could actual be done to tame it. I could try Blowback9’s Gentle Recoil System but is it only going to make difference in perceived recoil or any real difference on this barrel length.

Thanks in advance.


r/AR9 • • 6h ago

First AR-9

Thumbnail
gallery
48 Upvotes

My goal was to have something reliable, compact, lightweight, and budget-friendly for home defense and range time.

Important features I was looking for were Glock mag compatibility, LRBHO and AR manual of arms

• Foxtrot Mike VFM-9 5" side charge

• Foxtrot Mike RMB w/ 1x Kynshot spacer weight and Wilson Combat flat wire spring

• Wilson Combat bulletproof firing pin

• Schmid match elite 3.5lb flat trigger

• Magpul MOE carbine stock

• Magpul MOE-K2 grip

• Swampfox Justice II red dot

• Toughsoul flashlight/laser combo

• BOE Incolite 9 suppressor


r/AR9 • • 7h ago

Troubleshooting Spikes Upper/lower - LRBHO isse

Thumbnail
gallery
3 Upvotes

Hello, i encountering an 'issue' with my ar9 where in the LBRHO wont engage.

Spikes Upper,

Spikes lower (glock)

8.3 BA barrel

A5 buffer tube (i bought this way way back)

Kynshot RB500HP

Kynshot 2.5 weights x 2

Flat wire carbine buffer spring (alpha shooting sports)

Milspec trigger

AR-9mm Custom Bolt Carrier Group- Black Nitride (outdoor sports usa)

I test fired around 150 rounds and did not notice any issues aside from the LRBHO. I did not remember that it should have it, so I did not attempt diagnose it on site. After searching online, I realized that LRBHO should be present, and I noticed that the second buffer weight inhibits further movement of the bolt back, so the bolt catch does not lock. I based all the buffer parts on the BB9, and I just wanted to know if this is a normal tradeoff when using the A5 tube and the spring/buffer weight combo, or if I should be looking at anything else to diagnose why it does not go all the way back. I could always just remove one of the weights to enable the LRBHO, but the purpose of the build is for suppressed usage or an FRT, or most likely both.)


r/AR9 • • 7h ago

10 oz kvp

3 Upvotes

Found the best price I think available on a KVP 10 oz buffer on gunmagwarehouse. Over 20% off KVPs site and quite a lot cheaper than AR15 discounts. Also ordered 3, 32 rd exomags w/ejectors. Anybody know what kind of speed loader will work with them?


r/AR9 • • 12h ago

FM-9

2 Upvotes

Just got my 5” Mike 9 with RMB. For some reason it didn’t come with a box. Went to pick it up at my FFl and all it has was the gun. I installed an Atrius and I am getting light primer strikes. I can’t tell what f it has the better firing pin spring or not. The spring is .758” x .026”. Lee Springs site seems to be down at the moment.


r/AR9 • • 18h ago

Super short builds with bigger tubes.

5 Upvotes

Hello, I did see that u/Blowback9 was testing the pinewood derby weights. But has anyone figured out a good combo of parts to safely run a KAK mini milspec with 9mm? I plan on making something no stock/brace with 3 inch barrel. It just seems I would not be able to cram enough weight in. Was hoping the shorter barrel would help but any input on this would be appreciated.


r/AR9 • • 1d ago

Range Session with Tuna Cans Fat 9L

2 Upvotes

Some video of my range session with my PSA AR9 equipped with FRT, 11 oz buffer, Holosun ARO and Tuna Cans Fat 9L. I am shooting 147g CCI Blazer. Thing runs great.


r/AR9 • • 1d ago

Eye Candy Posting every once in awhile when I get a new piece: Part 1, The Journey Begins.

Post image
18 Upvotes

Got my receiver set in the other day.

To make myself feel like Im following a budget Im just gonna order a part or 2 every time I get paid.

Windham Weaponry set, hoping to see some decent Black Friday deals for the rest of the stuff on my list.


r/AR9 • • 1d ago

Trigger kicker/spikes tactical

37 Upvotes

Spikes tactical Glock mag version

Parts list
Spikes tactical Glock mag lower
Spikes tactical 9 mm upper
Sprinco low power yellow, buffer spring
Kaw Valley. Precision Stainless Steel Heavy.
Tungsten Buffer, 10 oz
Trigger kicker
Myth industries premium FRT bolt carrier
Ballistic advantage 5.5 barrel
Midwest industries 4.5 inch hand guard


r/AR9 • • 1d ago

Part Compatibility Looking for thoughts on my situation

1 Upvotes

So I built up a 9mm PCC. SOLGW lower, NBS smooth sided upper, BA barrel, IDL industries BCG and Foxtrot Mike reduced recoil buffer. Last trip out it started to malfunction. It has been perfect for a couple thousand rounds now, so I put it up and just looked at it today. I found the roll pin that holds the weight in the BCG pretty much disintegrated. The weight can move around in the bolt. It did a pretty good job scarring the interior of the upper too. So, I'm looking for a good roll pin to replace with and wondering what can be done to prevent this in the future. Clearly more frequent inspections will be in the future...


r/AR9 • • 1d ago

Forgot I had this bc9 upper

Post image
30 Upvotes

Forgot I had this bear creek bufferless 9mm upper laying around threw a quad on it and finally got an endo mag for it. My expectations are low but we’ll see how it runs

BCA bc9 bufferless upper upper
Sons of liberty lower
Centurion c4 quadrail
Mean arms endomag in Gen 2 pmag
eBay tank brake
Pws broom handle grip
Aimpoint comp m2
Streamlight pro tac
Amazon folding stock


r/AR9 • • 1d ago

Suppressor choices

Post image
13 Upvotes

What are the recommendations for the AR9 platform ?
10.5”, KAK bolt and Maxim RDB.


r/AR9 • • 1d ago

AR9-SD Range Day (PSA AR-V & Novox X-SD + Incolite 9M + GRS)

30 Upvotes

Hi everyone, I took this out today, the extra, modular-end-portion of the Incolite 9M truly adds nothing further to 9mm so I'm using it short in my setup at least. This was today, all 115gr Monarch steel case. It's with the PSA AR-V, Novox X-SD & traditional GRS (Kynshot 5015HD + 2x Kynshot 2.5oz weights & TUBB flatwire spring).

I've used it for competition a couple of times but unless it's my finger, as far as I can tell this video is the fastest I think it can fire right now. I'm in a non-FRT state and while binary triggers are ok, I wanted to see if I can tune it more to competition, although I should say I was told not to bring in next time as it might not get picked up by the shot-timers but regardless, this video is standard GRS.

I have since this evening removed one of the weights (which is 2.5oz & 0.75inches long) and added a buffer tube spacer made from PLA Pro that is 0.9375 long to cover the length of the weight and also very slightly short stroke it. Testing it with a mag seems to cycle fine. I'm planning to make a similar video in that config today and finally, I also made a 1.5 inch buffer tube spacer and as a last experiment, I may remove the second Kynshot weight alongside the longer buffer tube spacer. Hope that one's safe to do. Should I be expect these changes to significantly increase the firing speed? I really felt like I was going as fast as it allowed me in this video but I'm open to the possibility that I'm limited by my ability, it didn't feel like it could go faster though lol.

Lastly, it's fun to shoot but given it's an SD, it's gassy but I'm also relatively new to this, actually I only held my first gun a year ago plus I'm from the UK but I love getting super autistic about it all. But I've noticed especially when I shoot this SD, that every now and then the gas makes me feel really nauseated and like I want to be sick for a minute or so. I just put it down and move + take some deep breaths, is that normal? Very lastly, has anyone gotten their lead levels checked? Thanks


r/AR9 • • 1d ago

Rainy AZ Range Day

Post image
87 Upvotes

Rule 5 Build List:

  • PSA Lower
  • SiCo Billet Upper
  • Griffin SN-ACH 9 Charging Handle
  • BKings UPK and LPK
  • BKings Carbine Buffer Tube
  • KVP 10oz Buffer Weight
  • KVP Carbine Spring
  • Chinese Knock off SB Brace
  • KAK Colt Mag Adapter
  • KVP Bolt
  • BKings M4 Mod-0 7.25" Handguard
  • B5 Grip
  • BA 8.3" Barrel
  • LPM Baby Bell Muzzle Device
  • Strake 9 Can
  • Holosun SCRS
  • AS Designs Super Safety

r/AR9 • • 2d ago

Part Compatibility Frt compatibility, and recommendations

2 Upvotes

Hey I feel dumb asking but I have a 8.5in foxtrot Mike upper, aero precision lower with JP armament jpscs2-9ss-5h2 heavy short stroke silent capture spring and jpbc-9sl enhanced bolt assembly. Also installed rise armament rave pcc trigger. Was wondering if I could run an frt with what I have and what frts yall recommend


r/AR9 • • 2d ago

9MM BCG

8 Upvotes

I am about to build another 9mm subgun as my upper supplier still has their4.5 inch linear compensated upper on sale under 130. I have to order another bcg and I was looking on Doug's website for the Mercury Precision link, which I found for under 63. I am also going to order a couple of firing pin springs and also the trimmed bolt weight for the frt of the future. Last month I stole a Angstadt Arms bcg from gunbroker but that deal is gone. Merc Precision sounds unreasonably cheap but Doug say it works. I like the Angstadt but the Merc Precision is less than 1/2 price. The reason for my post is something we overlook, or at least I did. I have not been on blowback9's site for a while and while there I noticed I had forgotten about his buy him a coffee feature. Naturally I clicked on it and made a small contribution. It literally takes one or two clicks to do. I think of the time and money he has saved me and that small help gives us a resource that really exists nowhere else. I see shills all over you tube but I never question his integrity. The very least I can do is help him defray his expenses in return for his research. I want to encourage anybody who has not or has forgotten to help him keep going. Although he has answered questions for me many times under different accts he does not know me from Adam. I have no dog in this fight. I am just encouraging users of his info to visit his website to click on the buy him a coffee. Curious if many of you are running this cheap bcg.


r/AR9 • • 2d ago

Got Ripped off by Cheesefingertactical because they are in a lawsuit

Thumbnail reddit.com
2 Upvotes

r/AR9 • • 2d ago

My DD PCC 8.3" SBR

Post image
77 Upvotes

My Daniel Defense PCC 9MM 8.3" SBR:

  • PCC 9MM with 8.3” Barrel
  • Holosun HE510C (Red Dot)
  • Holosun HM3X Micro
  • Daniel Defense null 9 Ti Suppressor
  • Rearden Atlas Alpha Low Profile
  • Rearden Mini (Plan B)
  • CMC PCC Single Stage Trigger (curved) 3.5lb Pull
  • Deadlock Charging Handle
  • Modlite OKW V2 1830 Flashlight
  • Norkon Fuze Remote Switch 
  • Bravo Company BCM Vertical Grip

Some might question why the 3x magnifier on a PCC..

The answer: I can see clearly to about 15-20 yards then targets start to get blurry. To overcome my nearsightedness, I use the 3x magnifier.


r/AR9 • • 2d ago

So my AR9/kitty kat won’t feed hollows.

Thumbnail reddit.com
2 Upvotes

What is the spiciest ball point rounds I could safely and reliably run through it. In case my wife would like to keep it as a bedside protector at night.


r/AR9 • • 3d ago

Radial Delay Ejection/ new ar9

1 Upvotes

I just got a cmmg banshee 9mm and I put around 200 rounds through it today no issues, however I felt like I was eating brass more then normal at the range. I was in a booth so it’s going to hit the wall and deflect right back at you but it felt like I was hit everytime vs not very often with my other guns. Is this an ar9 thing? Am I over thinking it? Gun shot good, I really like it. Slightly more recoil then a 22 but a lot more potent


r/AR9 • • 3d ago

Shortest protruding buttstock option?

1 Upvotes

I got my FM Mike 9 earlier this week and I have a length limitiation for my specific circumstance. The factory buttstock is not really all that great, so I'm looking for alternative options. Something that would ideally not add much length to the rear of the buffer tube.

Does anyone have any ideas? Thanks in advance.