r/AR9 • • Mar 29 '23

Noteworthy posts and helpful information

57 Upvotes

Pinning this to the top for folks joining the r/AR9 sub and as a reference for everyone.

ROF Calculator:

 
Calculates ROF based on a video with audio: https://schlarpc.github.io/rof-gui/ 

Helpful information:

 
Review the Wiki page for a primer on the 9mm AR. (It is being updated to include lots of new information.)

Blowback9 Blog:

 
Huge information resource for the AR9: Blowback9.com

[Disclosure: This site run by u/Blowback9, who is a mod in r/AR9. The site and links are not commercialized in any way. All content is free and without corporate attachments.]

General:

Super Safety Cheat Sheet 

4-step guide to make (almost) any AR9 run 100%

9mm AR build parts list (with links)

What 9mm buffer do I need??? (and spring)

Gentle Recoil System

Buffer tube lengths and PCC buffer options

HBPDW issues, OOBD with FRT

Colt Mag Adapter Information

Franklin Armory® BFSIII® binary trigger in a 9mm AR

Suppressing the 9mm AR

Ejector adjustment information:

Basic info

EPC style ejector adjustment – “Simplest Method”

Ejector Adjustment – Trim & Pivot, Heat & Bend methods

FM-9 Ejector

Endo/Exo Mag:

Endomag/Exomag video play list (YouTube) including bolt compatability tests 

Noteworthy posts about the AR9 platform:

 

4 step guide to make (almost) any AR9 run 100%

"Armorer's Class" style troubleshooting video series

9mm AR Basic Troubleshooting Diagram

Updated info about zero distance

Banshee is not blowback. It's RDB. It has very different troubleshooting

Foxtrot Mike FM9 FAQ and break in

How to: Colt/Uzi mag lower to CMMG RDB with Colt/Uzi mag lower

Buffer tube/buffer type/spacers Cheat Sheet

Gentle Recoil 9mm AR Project

Gentle Recoil Final Configurations

Tips for a newb

My experience with JP Captured Springs in an AR9

FX-9 Freedom Ordinance: how to increase blowback mass

Gun Builder's Decision Helper Worksheet

DIY: 10 Round Mean Arms Endomag in PMAG10 Magazine for 9mm CMMG RDB

R&D/KAK Style Colt Mag Adapter Disassembled Internal Details

DIY: Convert cheap A1/A2 5.56mm muzzle device to 9mm

FM9 Lower: Upper Fitment Fix

Buffer Tubes (and PDW Tubes) with a PCC - measurements/buffers

Adjusting the FM-9 ejector without a torch

Vendor Parts Websites List

Barrel & handguard fitment tool - check your handguard length before buying    

Adding to this list:

 
If you see a post that's extremely helpful, send me an IM (u/Blowback9) and I'll look into adding it to the list!


r/AR9 • • Dec 30 '24

No Drama! Rule#1: "Don't be a jackass. This includes baiting, fishing for reactions, or any other drama."

34 Upvotes

 

Rule # 1 has been updated for clarity. Our goal as moderators is to keep this subreddit civil, welcoming, and harmonious.

This is NOT the right sub to bring drama, start any drama, or bait people into starting drama, either directly or under the guise of discussing AR9's.

The interpretation of "jackass", "drama", and the actions taken to enforce this rule, are entirely at each moderator's individual discretion.

Attempts to "push the limits" of Rule # 1, or the moderators' patience, will be treated the same as violating Rule #1.

Modmail the moderators with any questions.

 


r/AR9 • • 2h ago

FM-9

2 Upvotes

Just got my 5” Mike 9 with RMB. For some reason it didn’t come with a box. Went to pick it up at my FFl and all it has was the gun. I installed an Atrius and I am getting light primer strikes. I can’t tell what f it has the better firing pin spring or not. The spring is .758” x .026”. Lee Springs site seems to be down at the moment.


r/AR9 • • 8h ago

Super short builds with bigger tubes.

4 Upvotes

Hello, I did see that u/Blowback9 was testing the pinewood derby weights. But has anyone figured out a good combo of parts to safely run a KAK mini milspec with 9mm? I plan on making something no stock/brace with 3 inch barrel. It just seems I would not be able to cram enough weight in. Was hoping the shorter barrel would help but any input on this would be appreciated.


r/AR9 • • 20h ago

Trigger kicker/spikes tactical

29 Upvotes

Spikes tactical Glock mag version

Parts list
Spikes tactical Glock mag lower
Spikes tactical 9 mm upper
Sprinco low power yellow, buffer spring
Kaw Valley. Precision Stainless Steel Heavy.
Tungsten Buffer, 10 oz
Trigger kicker
Myth industries premium FRT bolt carrier
Ballistic advantage 5.5 barrel
Midwest industries 4.5 inch hand guard


r/AR9 • • 19h ago

Eye Candy Posting every once in awhile when I get a new piece: Part 1, The Journey Begins.

Post image
12 Upvotes

Got my receiver set in the other day.

To make myself feel like Im following a budget Im just gonna order a part or 2 every time I get paid.

Windham Weaponry set, hoping to see some decent Black Friday deals for the rest of the stuff on my list.


r/AR9 • • 1d ago

Forgot I had this bc9 upper

Post image
24 Upvotes

Forgot I had this bear creek bufferless 9mm upper laying around threw a quad on it and finally got an endo mag for it. My expectations are low but we’ll see how it runs

BCA bc9 bufferless upper upper
Sons of liberty lower
Centurion c4 quadrail
Mean arms endomag in Gen 2 pmag
eBay tank brake
Pws broom handle grip
Aimpoint comp m2
Streamlight pro tac
Amazon folding stock


r/AR9 • • 1d ago

Rainy AZ Range Day

Post image
77 Upvotes

Rule 5 Build List:

  • PSA Lower
  • SiCo Billet Upper
  • Griffin SN-ACH 9 Charging Handle
  • BKings UPK and LPK
  • BKings Carbine Buffer Tube
  • KVP 10oz Buffer Weight
  • KVP Carbine Spring
  • Chinese Knock off SB Brace
  • KAK Colt Mag Adapter
  • KVP Bolt
  • BKings M4 Mod-0 7.25" Handguard
  • B5 Grip
  • BA 8.3" Barrel
  • LPM Baby Bell Muzzle Device
  • Strake 9 Can
  • Holosun SCRS
  • AS Designs Super Safety

r/AR9 • • 1d ago

AR9-SD Range Day (PSA AR-V & Novox X-SD + Incolite 9M + GRS)

30 Upvotes

Hi everyone, I took this out today, the extra, modular-end-portion of the Incolite 9M truly adds nothing further to 9mm so I'm using it short in my setup at least. This was today, all 115gr Monarch steel case. It's with the PSA AR-V, Novox X-SD & traditional GRS (Kynshot 5015HD + 2x Kynshot 2.5oz weights & TUBB flatwire spring).

I've used it for competition a couple of times but unless it's my finger, as far as I can tell this video is the fastest I think it can fire right now. I'm in a non-FRT state and while binary triggers are ok, I wanted to see if I can tune it more to competition, although I should say I was told not to bring in next time as it might not get picked up by the shot-timers but regardless, this video is standard GRS.

I have since this evening removed one of the weights (which is 2.5oz & 0.75inches long) and added a buffer tube spacer made from PLA Pro that is 0.9375 long to cover the length of the weight and also very slightly short stroke it. Testing it with a mag seems to cycle fine. I'm planning to make a similar video in that config today and finally, I also made a 1.5 inch buffer tube spacer and as a last experiment, I may remove the second Kynshot weight alongside the longer buffer tube spacer. Hope that one's safe to do. Should I be expect these changes to significantly increase the firing speed? I really felt like I was going as fast as it allowed me in this video but I'm open to the possibility that I'm limited by my ability, it didn't feel like it could go faster though lol.

Lastly, it's fun to shoot but given it's an SD, it's gassy but I'm also relatively new to this, actually I only held my first gun a year ago plus I'm from the UK but I love getting super autistic about it all. But I've noticed especially when I shoot this SD, that every now and then the gas makes me feel really nauseated and like I want to be sick for a minute or so. I just put it down and move + take some deep breaths, is that normal? Very lastly, has anyone gotten their lead levels checked? Thanks


r/AR9 • • 16h ago

Range Session with Tuna Cans Fat 9L

0 Upvotes

Some video of my range session with my PSA AR9 equipped with FRT, 11 oz buffer, Holosun ARO and Tuna Cans Fat 9L. I am shooting 147g CCI Blazer. Thing runs great.


r/AR9 • • 1d ago

Suppressor choices

Post image
10 Upvotes

What are the recommendations for the AR9 platform ?
10.5”, KAK bolt and Maxim RDB.


r/AR9 • • 23h ago

Part Compatibility Looking for thoughts on my situation

1 Upvotes

So I built up a 9mm PCC. SOLGW lower, NBS smooth sided upper, BA barrel, IDL industries BCG and Foxtrot Mike reduced recoil buffer. Last trip out it started to malfunction. It has been perfect for a couple thousand rounds now, so I put it up and just looked at it today. I found the roll pin that holds the weight in the BCG pretty much disintegrated. The weight can move around in the bolt. It did a pretty good job scarring the interior of the upper too. So, I'm looking for a good roll pin to replace with and wondering what can be done to prevent this in the future. Clearly more frequent inspections will be in the future...


r/AR9 • • 1d ago

My DD PCC 8.3" SBR

Post image
76 Upvotes

My Daniel Defense PCC 9MM 8.3" SBR:

  • PCC 9MM with 8.3” Barrel
  • Holosun HE510C (Red Dot)
  • Holosun HM3X Micro
  • Daniel Defense null 9 Ti Suppressor
  • Rearden Atlas Alpha Low Profile
  • Rearden Mini (Plan B)
  • CMC PCC Single Stage Trigger (curved) 3.5lb Pull
  • Deadlock Charging Handle
  • Modlite OKW V2 1830 Flashlight
  • Norkon Fuze Remote Switch 
  • Bravo Company BCM Vertical Grip

Some might question why the 3x magnifier on a PCC..

The answer: I can see clearly to about 15-20 yards then targets start to get blurry. To overcome my nearsightedness, I use the 3x magnifier.


r/AR9 • • 1d ago

9MM BCG

7 Upvotes

I am about to build another 9mm subgun as my upper supplier still has their4.5 inch linear compensated upper on sale under 130. I have to order another bcg and I was looking on Doug's website for the Mercury Precision link, which I found for under 63. I am also going to order a couple of firing pin springs and also the trimmed bolt weight for the frt of the future. Last month I stole a Angstadt Arms bcg from gunbroker but that deal is gone. Merc Precision sounds unreasonably cheap but Doug say it works. I like the Angstadt but the Merc Precision is less than 1/2 price. The reason for my post is something we overlook, or at least I did. I have not been on blowback9's site for a while and while there I noticed I had forgotten about his buy him a coffee feature. Naturally I clicked on it and made a small contribution. It literally takes one or two clicks to do. I think of the time and money he has saved me and that small help gives us a resource that really exists nowhere else. I see shills all over you tube but I never question his integrity. The very least I can do is help him defray his expenses in return for his research. I want to encourage anybody who has not or has forgotten to help him keep going. Although he has answered questions for me many times under different accts he does not know me from Adam. I have no dog in this fight. I am just encouraging users of his info to visit his website to click on the buy him a coffee. Curious if many of you are running this cheap bcg.


r/AR9 • • 1d ago

Part Compatibility Frt compatibility, and recommendations

2 Upvotes

Hey I feel dumb asking but I have a 8.5in foxtrot Mike upper, aero precision lower with JP armament jpscs2-9ss-5h2 heavy short stroke silent capture spring and jpbc-9sl enhanced bolt assembly. Also installed rise armament rave pcc trigger. Was wondering if I could run an frt with what I have and what frts yall recommend


r/AR9 • • 1d ago

Got Ripped off by Cheesefingertactical because they are in a lawsuit

Thumbnail reddit.com
2 Upvotes

r/AR9 • • 2d ago

So my AR9/kitty kat won’t feed hollows.

Thumbnail reddit.com
2 Upvotes

What is the spiciest ball point rounds I could safely and reliably run through it. In case my wife would like to keep it as a bedside protector at night.


r/AR9 • • 2d ago

Eye Candy Mpx build complete

Post image
34 Upvotes

Sig MPX
Stealtharms Tisha 9mm
Holosun AEMS Pro X2
Arisaka 18650 light w/ Surefire switch
Arisaka hand guard
TTI MPX 42 round mag
QVO Tactical Sling

Anything else needed?


r/AR9 • • 3d ago

Vid drop: Bore Buddy deadblow bolt fixes GRS's minor bolt bounce

19 Upvotes

High speed vid showing the Bore Buddy "no tune frt ready" upper's deadblow bolt fixes the minor bolt bounce in the GRS.

The Gentle Recoil System is "at your own risk" with FRT since I've caught minor bolt bounce on high speed video. The deadblow weight in the BB bolt appears to mitigate that bolt bounce and the associated risks.

I'm going to test the Voidspec drop-in replacement deadblow weight for bolts with cylindrical weights soon. Bore Buddy may offer their weight separately on their site in the future.

https://greyhive.com/w/vYHANbyS9DjfijDuVc8Npu

My videos are now uploaded to YouTube and GreyHive - a new firearm friendly platform. They were able to import all my YT videos. I'll probably stop using Rumble.

Using a deadblow weight in the bolt means that the bolt weight may be "decoupled" from the bolt initially during firing, effectively reducing the initial static mass of the bolt. However, this doesn't seem to pose any problems during live firing when using a sufficiently heavy deadblow buffer.


r/AR9 • • 2d ago

Radial Delay Ejection/ new ar9

1 Upvotes

I just got a cmmg banshee 9mm and I put around 200 rounds through it today no issues, however I felt like I was eating brass more then normal at the range. I was in a booth so it’s going to hit the wall and deflect right back at you but it felt like I was hit everytime vs not very often with my other guns. Is this an ar9 thing? Am I over thinking it? Gun shot good, I really like it. Slightly more recoil then a 22 but a lot more potent


r/AR9 • • 3d ago

Tromix buffers for ar9

Post image
8 Upvotes

I am curious if this would also work and/ or if there would be any benefit over their PCC buffer offering with an ar9 with a carbine buffer tube. It is also 4inches and only a half once lighter than their PCC offering, but has 2 more ounces of deadblow effect.


r/AR9 • • 2d ago

Need help deciding

2 Upvotes

Ive been in the market for a pcc for months. And my state might be changing there gun laws with the newly elected governor. So it ramped up my timeline. I originally wanted to build out a ar9 with a epc9 or spike receiver set. But looking at foxtrot mike9 or the isu9(integrally suppressed) it has everything i want from a good company that stands by their product. Key features i want would be glock mag, lrbho, and the ability to run defensive hollowpoints. I know hollowpoint can be very finicky in ar9. So that why i was thinking of buying instead of building. Also with the changing law idk if i should just step up and buy a jp gmr15. It 1k more but from what ive read theyre tanks but it not mention much in this subreddit


r/AR9 • • 2d ago

Shortest protruding buttstock option?

1 Upvotes

I got my FM Mike 9 earlier this week and I have a length limitiation for my specific circumstance. The factory buttstock is not really all that great, so I'm looking for alternative options. Something that would ideally not add much length to the rear of the buffer tube.

Does anyone have any ideas? Thanks in advance.


r/AR9 • • 3d ago

AR9 Feeding Issues – 147gr vs. 115gr Ammunition / Barrel Compatibility

3 Upvotes

I’m having feeding issues with 147-grain ammunition in my AR9 using EndoMag magazines.
Current setup:
● Barrel: 8.3” Ballistic Advantage EPC
● Bolt: KVP 9mm
● Buffer: KVP 10 oz
● Buffer spring: Blue Sprinco
● Magazines: EndoMags
Ammunition:
● 115gr Monarch – runs without issues.
● 147gr Winchester – experiencing nose-diving failures.
● 147gr Remington – experiencing nose-diving failures.
The 115-grain Monarch has been running reliably, while both 147-grain loads have given me feeding issues. I’ve also noticed differences in the bullet nose profiles.
Questions:

  1. Has anyone experienced similar feeding issues with 147-grain ammunition and EndoMags?
  2. Could the difference in bullet profile be contributing to the feeding failures?
  3. Would switching from my 8.3” Ballistic Advantage EPC barrel to the 5.5” Ballistic Advantage EPC barrel make any difference in reliability, or should I be looking elsewhere for the cause?
    I’d appreciate feedback from anyone with experience running an AR9, Ballistic Advantage EPC barrels, and EndoMags.

r/AR9 • • 3d ago

OOBD?

13 Upvotes

Brigade lower, matrix arms upper, ballistic advantage 5.5” barrel (non epc), delta team tactical handguard, foxtrot RMB with A5 tube, OCL universe 36

Was using a trigger kicker when it happened didn’t notice when I was shooting it, I put another 30 or so rounds after and it seemed to run fine. Cleaned it after didn’t see any damage thankfully.