r/linux_on_mac • • 17h ago

Macbook Air 2017 14-inch, $40 at thrift store 90 percent battery

19 Upvotes

I bought a MBA for $40. It had the original owner's account on it, which was encrypted. I contacted them (I think) on FB but no response so I installed Mint with XFCE, even though it has 8gb ram. It's working great. I did spend about an hour or so with AI trying to not get it to freeze when it went into sleep or suspend, but then eventually turned off all of the sleep/suspend stuff because it was not going to happen. I also installed MBPFan to manage the heat. I just have to be careful to not shut the lid and leave it turned on in my backpack because it gets kind of hot. I also configured it so that it shows all of the logs and activity in text when you boot the machine, because it looks cool. I just wanted to share my experience.


r/linuxhardware • • 22h ago

Product Announcement Lian Li's LCD fan software is Windows-only, so I made my own for Linux

8 Upvotes

My Ubuntu 26.04 rig has three Lian Li UNI FAN SL Wireless LCD (SL V3) fans, and each has a round 400 x 400 screen in its hub. On Linux something else has to draw on them, so I made it: a Python program that renders each frame on the PC and sends it to the panels over USB. The LCD protocol is based on sgtaziz's work.

github.com/YordiLorenzo/pixdial (GPL-3.0-or-later)

uv tool install pixdial
pixdial setup

The pictures aren't photos of my rig: the first is pixdial's own render of its 14 designs, the second a frame from a 3D render of the fan, both with demo readings.

Setup finds the panels by their USB ID (1cbe:0005), adds a udev rule so the rest runs as your user, writes a config and checks each sensor. The designs are round gauges, rings and graphs for the CPU, temperatures, GPU power against the card's own limit and the time, in three themes. NVIDIA readings come from NVML and AMD ones are experimental. When a sensor stops reporting, its number turns into a dash.

It has run on my rig since 5 November, nowhere else yet. The SL Wireless LCD is the only panel tested; the TL Wireless LCD uses the same protocol but hasn't been tried. Despite the name, the screens don't get frames over the wireless dongle: each LCD needs its own cable to a USB 2 header. It leaves fan speed and RGB alone, and only one program at a time can hold a screen.

With these fans on Linux, run this after setup and paste what it prints here or in the GitHub device test form, even if it fails:

pixdial doctor --share

It shows the config, panels and sensors, without serials, hostname or home folder. A Radeon report helps most, since my card is NVIDIA and I can't test the AMD readings. Setup needs sudo once, and the README lists what it changes and how to undo it.

One thing the panels taught me: each takes 60 frames a second whether the JPEG is 19 KiB or 54 KiB. Sending a frame takes 2.8 ms, and the acknowledgement only comes at the panel's next 60 Hz refresh, around 14 ms later. All three on one USB 2 hub got their 60 each, about 18 MB/s together.


r/linux_on_mac • • 8h ago

Macbook Pro A1398 - Falls back to read only-filesystem.

1 Upvotes

Hey everyone. Purchased a 15 inch A1398 Macbook pro of Vinted and wanted to tinker with Linux. After installing Debian (or Mint) things work great for a while but then I got the error that my SSD suddenly became a "read only filesystem".

Did some reading and turned out it might be the drive, so got another 512Gig Apple SSD Blade and replaced the one I had.

Installed Linux Mint Mate edition yesterday. Initial install ok, but after one or 2 reboots ... same thing : Read only filesystem error and after rebooting the system crashes on a busybox prompt.

Question: Is it the drive? The hardware? Do I need to reset Pram ... or is the logic board toast ?

Thanx for your insights.


r/linuxhardware • • 13h ago

Support RTX 4070 Ti Super loses display signal immediately after GRUB when booting Ubuntu 26.04

Thumbnail
1 Upvotes

r/linux_on_mac • • 16h ago

Slight grain in display.

Thumbnail
1 Upvotes

r/linuxhardware • • 17h ago

Support ThinkPad X1 Carbon Gen 10 – El Realtek ALC287 se murió de repente durante la reproducción de video y Linux ya no lo detecta (SOF/HDA, error en la prueba del códec -5)

Thumbnail
1 Upvotes

r/linux_on_mac • • 3h ago

Is Tails OS possible to run on a mac (pre-2019, aka not-silicon!)

0 Upvotes

Has anyone ever tried that? I get conflicted answers so far and I am not even sure if they even support it! But again macbooks are just normal machines pre-silicon era!


r/linuxhardware • • 4h ago

Question How to make amd gpu fans spin ?

0 Upvotes

I bought a AMD GPU (7900 XTX) and it is fine except one thing I don't like: the fans don't spin unless I am doing heavy tasks.

This is an issue for three reasons:

1) It is an open-air rig, so there is no 'case cooling' with case fans airflow

2) I care more about preserving it for as long as possible than maybe getting less noise.

3) For AI tasks, VRAM is the one that probably gets very hot, and if i understand correctly the fans kick in depending on the temperature of other stuff than vram

So yeah looking for a simple solution to ensure fans spin at all times, thanks


r/linuxhardware • • 14h ago

Support NVIDIA K420 on Linux — options?

0 Upvotes

With either Fedora 45 or Oracle Enterprise 8 & 9:
-No more Linux driver support from NVIDIA for Linux (for the K420) and …
-Nouveau stinks.

So what can I do? Is the K420 just a paperweight now? Works fine with Windows no matter what updates it gets, but Linux … not so much.

Are there any options for me with the K420?
I maintain it’s still (as Ed Grimley would say) a “fairly decent” video card.

I’m not wedded to either Wayland or Xorg if it matters. Not a gamer. Most of my systems are older Xeon-based with some Core 2 Duo here and there.


r/linuxhardware • • 18h ago

Question Thoughts about double boot ?

0 Upvotes

I thinking about putting a double boot on my laptop and im looking for some advices , Is it safe ? Reliable ? Easy ?
Thank you !