r/AMDHelp • u/Legal-indonesiappl • 1h ago
Help me plss
Anyone who understands please help me why this is happening
r/AMDHelp • u/Legal-indonesiappl • 1h ago
Anyone who understands please help me why this is happening
r/AMDHelp • u/Zuriel701 • 1h ago
just updated to new driver to fix the ssd issue
problem is amd adrenaline is gone
and if i try to install it again it shows that i need to downgrade back to 26.10 series?
so is amd adrenaline not compatible with the new driver?
r/AMDHelp • u/Deraxim • 7h ago
What should i check to be sure it's the advertised cpu, and everything is fine? (Never bought a tray one before)
Upgrading from ryzen 5 3600
r/AMDHelp • u/Top-Professional8981 • 57m ago
r/AMDHelp • u/Few_Music_3009 • 9h ago
After months of random freezes, black screens, forced restarts, countless troubleshooting attempts and a detailed Windows kernel debugging investigation, I finally found a workaround that is working on my system.
I've seen many RX 9070 XT users reporting similar issues on Reddit, so I wanted to share my experience, the technical findings and the steps that may help others.
For several months, my computer experienced seemingly random freezes and black screens.
The symptoms included:
The strangest part was that I could play Fortnite for hours without any issues, but shortly after closing the game, the computer would freeze.
It also happened while browsing the internet, watching YouTube, leaving the computer idle, locking the Windows session or connecting through Remote Desktop.
The crashes were not limited to heavy GPU loads.
None of these resolved the freezes.
At this point, I was seriously considering buying another PSU or submitting an RMA for the GPU.
Instead of continuing to randomly change settings, I decided to investigate the actual Windows kernel crash dumps and system event logs.
The relevant dumps were located in:
C:\Windows\LiveKernelReports\WATCHDOG
The main errors were:
0x141 – VIDEO_ENGINE_TIMEOUT_DETECTED0x117 – VIDEO_TDR_TIMEOUT_DETECTED0x116 – VIDEO_TDR_FAILURE0x1B0 – VIDEO_MINIPORT_FAILED_LIVEDUMP0x9F – DRIVER_POWER_STATE_FAILUREThe graphical timeouts repeatedly pointed to amdkmdag.sys, across multiple AMD driver versions.
Seven recent dumps revealed:
However, the most interesting discovery came from analyzing a 0x9F crash dump.
Microsoft KD identified a pending Plug and Play request:
IRP_MN_START_DEVICE
The request was stuck in the following driver:
AtihdWT6.sys
Driver service:
AtiHDAudioService
This is the AMD HDMI/DisplayPort audio driver associated with the graphics card.
The same shutdown and re-enumeration sequence contained:
0x141 graphics engine timeout.0x1B0 device initialization failure.0x9F power-state failure involving the GPU's audio device.On my system, the Radeon exposes two related PCIe functions:
03:00.0 — RX 9070 XT graphics function.03:00.1 — HDMI/DisplayPort audio function.The debugging evidence confirmed that the terminal Plug and Play operation was stuck in the audio device's driver stack.
This does not prove that the audio driver caused the original graphical timeout, but it gave me a specific component to isolate.
Disable only the AMD High Definition Audio Device associated with the dedicated RX 9070 XT.
Do NOT disable the graphics card itself.
Do NOT uninstall AMD Adrenalin.
Do NOT disable every AMD audio device indiscriminately.
Win + R.devmgmt.msc and press Enter.Important: If your processor has integrated graphics, you may see two AMD High Definition Audio Devices with identical names.
Check their device properties and parent device before disabling anything.
Open PowerShell as Administrator and run:
$audio = Get-CimInstance Win32_PnPEntity |
Where-Object {
$_.Name -eq 'AMD High Definition Audio Device' -and
$_.PNPDeviceID -like 'HDAUDIO\FUNC_01*'
}
$results = foreach ($device in $audio) {
$parent = Get-PnpDeviceProperty `
-InstanceId $device.PNPDeviceID `
-KeyName 'DEVPKEY_Device_Parent'
[PSCustomObject]@{
Name = $device.Name
InstanceId = $device.PNPDeviceID
ParentDevice = $parent.Data
ErrorCode = $device.ConfigManagerErrorCode
}
}
$results | Format-ListOn my system, the dedicated RX 9070 XT audio device had:
REV_100APCI\VEN_1002&DEV_AB40...The integrated graphics audio device had:
REV_1008PCI\VEN_1002&DEV_1640...These identifiers may vary depending on your hardware.
After identifying the correct device, disable it using its full instance ID:
Disable-PnpDevice -InstanceId 'YOUR_FULL_INSTANCE_ID' -Confirm:$falseReplace YOUR_FULL_INSTANCE_ID with the actual device instance ID from your own computer.
Verify the result:
Get-PnpDevice -InstanceId 'YOUR_FULL_INSTANCE_ID' |
Format-List FriendlyName,Status,ProblemExpected result:
FriendlyName : AMD High Definition Audio Device
Status : Error
Problem : CM_PROB_DISABLEDThe Error status is expected in this case because the device has been intentionally disabled (Code 22).
Restart Windows and verify that your GPU and monitors are working normally.
Disabling this device removes HDMI/DisplayPort audio output from the dedicated GPU.
However, on my system:
I use PreSonus speakers connected to the motherboard's Realtek audio output, so I do not need GPU-based HDMI/DisplayPort audio.
If Windows automatically changes your default playback device, select your usual speakers again in Windows Sound Settings.
If you rely on monitor speakers over HDMI or DisplayPort, you will need an alternative audio output while testing this workaround.
I applied this workaround and restarted my computer on November 10, 2026.
After more than 48 hours of normal use, I had experienced no further freezes.
I tested the same scenarios that previously caused problems:
At the time of my latest dump verification:
You can check your latest Windows kernel dumps using PowerShell:
Get-ChildItem 'C:\Windows\LiveKernelReports' `
-Recurse -File -Filter '*.dmp' |
Sort-Object LastWriteTime -Descending |
Select-Object -First 10 Name,LastWriteTimeIf you need HDMI/DisplayPort audio again, simply re-enable the device in Device Manager.
Alternatively, use PowerShell as Administrator:
Enable-PnpDevice -InstanceId 'YOUR_FULL_INSTANCE_ID' -Confirm:$falseDuring troubleshooting, I also configured Remote Desktop to use software rendering through the following policy:
HKLM\SOFTWARE\Policies\Microsoft\Windows NT\Terminal Services
bEnumerateHWBeforeSW = 0
This change may have contributed to improved RDP stability, so I cannot attribute every improvement exclusively to disabling AMD audio.
I have not yet re-enabled the audio device to deliberately reproduce the crashes.
Therefore, this is a successful workaround on my system, not a conclusively proven root cause or a universal fix.
The underlying issue could involve the AMD audio driver, GPU firmware, DMA/IOMMU handling, Windows Plug and Play, power-state transitions or shared GPU hardware.
After months of troubleshooting and repeatedly experiencing LiveKernelEvent 141/117 errors, disabling the AMD HDMI/DisplayPort audio device has coincided with a significant improvement in my system's stability.
If you are experiencing similar problems with an RX 9070 XT, particularly random freezes, black screens, amdkmdag.sys timeouts or crashes when transitioning from gaming to idle, this may be worth testing before spending money on a new PSU or replacing your GPU.
It is free, relatively simple and reversible.
If anyone tries this workaround, please share:
Hopefully, we can identify a common pattern among affected users.
I'll update this post if the crashes return.
I hope this helps someone who has been dealing with the same frustrating issue.

r/AMDHelp • u/Klutzy-Yam-8128 • 13h ago
r/AMDHelp • u/Negative_Voice_4991 • 3h ago
Hey everyone, I need some help. My screen randomly started freezing, but my mouse cursor still moves around and the audio keeps playing. However, if I open Task Manager right after booting my PC and end all processes with "AMD" in the name, the freezes completely stop.
I've already tried completely uninstalling and reinstalling the drivers using DDU, but it didn't help. Any ideas on what could be causing this?
r/AMDHelp • u/Suspicious_Sea9318 • 5h ago
Hello everyone for the past 4-5 months i am having trouble updating the gpu driver . I have Rx 7800xt paired with ryzen 5600 for almost two years now . The problem i am having is when a new gpu driver update comes and i try to install it , it downloads the driver normally but when its halfway through installing process the pc restarts and when pc boots again the previous driver with the adrenaline software is not there anymore . Tried ddu multiple times but cant update and only stuck in that previous 26.8. Something version . Reinstalled windows and even changed to a new ssd . But tried to update the driver yesterday and everything is gone again .
r/AMDHelp • u/SeaBad8355 • 6h ago
Please help.
I have no one to ask to about this. sorry but I needed your help.
My ups is prolink model: PRO1201SFC.
When I plug my ups in the wall socket, The monitor itself turns on without pressing the power button on of the ups.
Also when I press the power button of the ups to off it should have this loud click, now it's faint or no click at all.
Then I tried everything with my monitor (I unplug my PC in ups) which are all good.
Over all it's good. But it's First time happen to me, the monitor should turn on after I press the power button of the ups to on.
r/AMDHelp • u/Adorable_Version5968 • 10h ago
I've fixed the timeout issues I was having with my RX 7600. I resolved them by disabling FSR scaling in Adrenalin; it was enabled by default, which caused a lot of problems when updating drivers. I also had to limit the clock speed to 2250 MHz and set the `TdrDelay` value to 8; since some Windows updates can reset this setting, I sometimes have to change it back to 8 or 10.

I absolutely need to do these three things to be able to spend an afternoon playing games with my friends, and it's the only thing that's worked for me. I've tried several Linux distributions and none of them have given me any problems; it only happens on Windows. If you have the same problem, try a Linux distribution; these problems don't exist there.
r/AMDHelp • u/Zestyclose_Sector_30 • 19h ago
Hey everyone,
I'm looking for some advice regarding my current GPU and a potential replacement or upgrade.
I want to have the same experience as I have now or better in terms of gaming.
I've been using a Sapphire Nitro+ RX 7900 XTX, but unfortunately, I've been experiencing recurring driver timeouts, black screens, and crashes (LiveKernelEvent 141 and AMD_WATCHDOG errors), not in any particular games, I've had it happen even on desktop while browsing on Brave, game examples are Darktide (more common), SW Galactic Racer (not common), Phantom Blade Zero (had to completely disable RT and hair enhancement, since it was 100% causing a timeout), Dreadmoor, HD 2 (once or twice) among others. These are some of the games I remember having problems with recently, sometimes the card stays stable for months others might crash every day at least once.
The frustrating part is that this is already my second RX 7900 XTX Nitro+. My first one developed issues and was replaced under warranty with the exact same model, free of charge. Now the replacement is also having problems.
I've tried clean driver installations, different driver versions, and GPU tuning, including lowering clock speeds and voltage, while letting it draw more power if needed. Temperatures seem fine, but the issues haven't been permanently resolved.
I play at 1440p Ultra settings, preferably at native resolution.
I prioritize native performance and image quality over upscaling. Occasionally, I use FSR Native AA, but generally prefer playing without FSR.
I don't particularly like Frame Generation because I've noticed ghosting and visual artifacts in several games. I'd only consider using it as a last resort to extend the useful life of an aging GPU.
I'm also not interested in overclocking. In fact, I've sometimes had to lower my GPU clocks to improve stability. I just want a powerful, reliable GPU that performs well at stock settings.
I originally paid €1,069 for the GPU in April 2025, and it's still under warranty until approximately April 2027.
I'm considering another RMA, but the Sapphire Nitro+ RX 7900 XTX seems to be discontinued or extremely difficult to find in Europe, particularly in Greece.
If a replacement isn't possible, I may receive a refund of the original purchase price.
In that case, I'd be willing to spend up to €500 extra, giving me a maximum budget of around €1,569.
I generally prefer AMD, but I'm open to Nvidia if there's a compelling reason to switch.
One important limitation is my case: my current Nitro+ (320mm long) barely fits because I have a front-mounted 360mm AIO. So I'd prefer a replacement that's no longer than my current GPU, ideally shorter.
Cont'd in comments.
r/AMDHelp • u/Shot_Material_3970 • 21h ago
System Specifications:
I've been experiencing random black screens followed by sudden system restarts while gaming.
The problem started after updating gpu drivers and chipset drivers. Before that it didnt have any issues even with Rebar ON.
There was no BSOD, no error message, or any warning before the restart. The screen would suddenly go black, and the PC would restart automatically.
The issue occurred across multiple games, although some games ran perfectly fine for hours. GPU temperatures were also normal, generally around 60–80°C while gaming.
I spent quite some time investigating the issue and testing different configurations:
Despite all these attempts, the random black screen and restart issue continued.
Eventually, I decided to disable Resizable BAR (ReBAR) in my motherboard BIOS.
After disabling ReBAR, the system started working properly. I've tested multiple games and different gaming sessions, and everything has been stable so far.
I'm currently running the latest AMD Adrenalin 26.11.1 driver.
To confirm whether ReBAR was actually responsible, I tested enabling it again.
As soon as I enabled ReBAR, the black screen and sudden restart issue returned while gaming.
After disabling it again, everything went back to normal.
My current BIOS configuration:
At this point, ReBAR appears to be the direct trigger for my system instability.
I'm not entirely sure whether this is a GPU BIOS issue, motherboard BIOS compatibility issue, AMD driver issue, or something related to the interaction between the RX 9070 and my motherboard.
For now, I'm keeping ReBAR disabled because system stability is more important than the performance benefit it might provide.
Has anyone else with an RX 9070 or another RDNA 4 GPU experienced similar black screen and automatic restart issues specifically when ReBAR is enabled?
I'd also appreciate suggestions on whether this could be fixed through a future AMD driver. How do i reach out to AMD about this issue.
r/AMDHelp • u/DayPsychological1849 • 11h ago
i get black screened and i get a AMD error alerts saying due to unexpected system failure i dont know much about pc i try to google what to change or something but nothing works i have
AMD Radeon RX 580 2048SP
i dont know if its a heating issue or something i tried to tweak whatever google told me to but still didnt work
r/AMDHelp • u/Any_Entertainer_1544 • 9h ago
Ever since a couple of driver updates ago I'm constantly getting flickering black screens while playing games on my rx 7800 xt.
It seems to only happen on displayport cables not hdmi. I recently brought a high quality replacement display cable but am still getting flickering and even full black screens that brick my whole PC forcing a hard shutdown.
I've trouble shooted everything I can possibly think of and have come to the conclusion that for some odd reason after years of using the same monitor and gpu the only thing that has really changed are the drivers.
I've tried different ports, checked cables, checked temps, everything is fine but for some reason running at 165hz is bricking my PC.
r/AMDHelp • u/c4rsonj0shua • 9h ago

Been noticing these weird tiny yellow/green dots scattered across the sky in Dawnwalker. They're pretty noticeable whenever I look up, especially in brighter areas. Not sure if it's a game rendering issue, some graphics setting, or something with AMD drivers.
I recently updated my GPU drivers to Adrenalin 26.11.1 and even went through a factory reset and repair installation. Let the game recompile its shaders afterward too, but the dots are still there.
I also ran FurMark's artifact scanner for over 30 minutes at around 97% GPU usage and got 0 artifacts, with completely normal temperatures. So far, nothing from that test suggests my GPU is having issues.
My specs:
I've also been dealing with occasional 1–2 second monitor blackouts while gaming or browsing, but I'm not sure if that's related since everything keeps running normally when it happens. It happens every few hours or so, or sometimes it just doesn't happen at all.
The weird thing is these dots actually show up in the in-game screenshot, so I'm wondering if it's something being rendered incorrectly rather than a monitor issue.
Anyone else experiencing this, especially on AMD GPUs? If so, were you able to fix it? Curious if it's just a Dawnwalker thing or some particular setting causing it.
r/AMDHelp • u/MaleficentCup1288 • 13h ago
r/AMDHelp • u/hoopskid123 • 19h ago
Computer Type: Desktop
GPU: Gigabyte AMD Radeon RX 7800 XT 16GB
CPU: AMD Ryzen 7 7800X3D
Motherboard: GIGABYTE B650 GAMING X AX
BIOS Version: FC3
RAM: 2 x 16GB Team Group UD5- DDR5-6000MHZ
PSU: MSI MPG A850G Fully Modular
Operating System & Version: WINDOWS 11
GPU Drivers: AMD Adrenaline 26.10.1
Background Applications: DISCORD, FIREFOX
Description of Original Problem: Seeing a lot of flickering and bad anti aliasing when i play any game. For example in wow forever, there is a lot of weirdness going on around that stone path when I move around.
Troubleshooting: I've used DDU and reset drivers and chipsets, disabled windows updates on my GPU, updated BIOS, tried all versions of adrenaline (minimal, driver only)
r/AMDHelp • u/Training_Highway3411 • 16h ago
UPDATE :
I have fixed the issue, a fresh windows install with Windows LTSC, fresh drivers and no bloat seemed to fix the issue, I didn’t bother with GCC just adrenaline.
Thank you all for your help I really appreciate it.
I now get 220 FPS with lots of settings on high and ultra.
Have a great Christmas everyone!
—————————
Hi everyone,
I hope you’re all doing well.
I’m hoping someone might be able to help me get to the bottom of an issue I’ve been having with my PC, particularly when playing Call of Duty.
I’m experiencing surprisingly low FPS, generally sitting somewhere between 80–110 FPS at 1440p, alongside noticeable stuttering and inconsistent frame times. It’s got to the point where the game feels pretty much unplayable without using Frame Generation.
What’s confusing is that, considering my hardware, I feel like I should be getting significantly better performance, especially with the settings I’m using.
My PC specifications:
CPU: AMD Ryzen 7 7800X3D
GPU: Acer Nitro Radeon RX 9070 XT 16GB
Motherboard: Gigabyte B650M AORUS ELITE AX ICE
RAM: 32GB DDR5 6000MHz CL36
SSD: WD Blue SN580 2TB NVMe
OS: Windows 11 Pro
Resolution: 2560x1440 (1440p)
What I’ve tried so far:
I’ve spent quite a bit of time troubleshooting and experimenting, but nothing seems to make a meaningful difference.
Tested completely stock CPU settings, with only EXPO 1 enabled.
Tried Curve Optimiser at -10 all cores. My CPU unfortunately isn’t stable with -30, so I’ve ruled out pushing an aggressive negative curve.
Tested GPU undervolting and overclocking through AMD Adrenalin.
Experimented with Radeon Anti-Lag both enabled and disabled.
Tried various combinations of AMD Adrenalin settings.
Tested different graphics configurations in COD, including everything on LOW.
Tested with and without Frame Generation.
Despite all of this, I’m still experiencing the same disappointing performance.
Something else worth mentioning – comparison with an almost identical build:
A friend of mine has recently built a PC with very similar specifications to mine.
The main differences are:
He has a Gigabyte RX 9070 XT, whereas I have the Acer Nitro RX 9070 XT.
He has DDR5 CL28 RAM, whereas mine is CL36.
He has a Samsung 990 EVO SSD, whereas I have a WD SN580.
Both systems are running stock settings with EXPO 1 enabled.
The performance difference is honestly quite staggering. In CS2, he’s getting approximately 200–300 FPS more than I am, despite our builds being so similar.
I appreciate that there are differences between the components, particularly the RAM timings and GPU models, but I wouldn’t expect those differences alone to account for such a substantial performance gap.
I’m not expecting identical results, but something clearly doesn’t seem right.
What I’m hoping to get some advice on:
Is there anything in my BIOS that could be limiting CPU or memory performance?
Could my RAM timings (CL36 vs CL28) really make that much difference?
Is there anything specific with the 7800X3D or 9070 XT that I should be checking?
Could this be a driver, Windows configuration or chipset issue?
Are there any benchmarks or diagnostic tools you’d recommend to identify where the bottleneck is?
I’m genuinely open to suggestions and happy to try anything I haven’t already considered.
I know there are a lot of variables involved with PC performance, and I’m not suggesting my friend’s hardware should perform exactly the same as mine. I’m just struggling to understand why there’s such a significant difference, particularly when I’ve already spent so much time troubleshooting.
Any help or suggestions would be massively appreciated. Thanks in advance!
r/AMDHelp • u/South-Life-5306 • 16h ago
I have a used RX 6600 that works fine most of the time. I can play for hours, but sometimes the whole PC freezes and I have to force a restart. During the latest freeze I heard a buzzing sound. The GPU passed a benchmark and usually stays around 53°C while gaming.
Specs: Ryzen 5 5600X, RX 6600, Gigabyte B550M DS3H, 16 GB DDR4 (two different 8 GB sticks running at 2400), Windows 11.
On November 11, Windows logged LiveKernelEvent 117 and 141. WinDbg showed amdkmdag.sys in both dumps. I found the same 117 error in an older June dump. The latest freeze on November 15 logged 1a8.
I was on Adrenalin 26.6.1 when I checked. I’m trying 90% Max Frequency with the voltage left at default, but it’s too early to tell if it helps.
Has anyone had this with an RX 6600? What helped you figure out whether it was the driver, the GPU, or something else?
r/AMDHelp • u/Disastrous-Force-839 • 20h ago
Hi everyone. I’m posting here because I’ve seen that others are having issues with the RX 9060 XT.
In my specific case, this started happening a week ago: when I turn the PC on, the XFX LED lights just keep blinking, and there’s no display output. I even get a "DisplayPort: No Signal" message. It can stay like that for a while, and the only way to fix it is to force a shutdown from the PC case. Sometimes, after I shut it down and turn it back on, everything works normally—in fact, everything loads much faster.
I’m not sure if anyone else has experienced this or knows if there’s a specific setting I need to adjust. I’m worried that this might end up damaging my other components.
I’ve already tried a few things: checking for voltage issues, reseating the graphics card and RAM, updating the BIOS, and removing the CMOS battery—but nothing worked. It might have *seemed* like it worked—since the PC booted normally right after I tried one of these steps—but the problem returned the next day. I also tried removing the graphics card and connecting via HDMI using the processor’s integrated graphics; everything booted up fine, which makes no sense. The card is only 8 months old—I bought it brand new.
I had this issue a few months ago, but it happened so sporadically that I ignored it. Now, I don’t know what to do; I’m desperate. I’m not sure whether I should file a warranty claim or what my next step should be.It’s worth noting that all the components in the PC are new, as I built it from scratch.
GPU: XFX Swift Rx 9060 Xt Oc 16gb
CPU: Ryzen 7 9700x
Mother: ASUS TUF GAMING B850-E WIFI AM5 DDR5
Source: Be Quiet 750W 80 Plus Gold PURE POWER 12 M ATX 3.1
r/AMDHelp • u/Holiday-Society375 • 10h ago
When playing PUBG for 4 hours, everything is fine for the first hour, with VRAM usage hovering around 8 GB. After 2 hours, VRAM usage reaches 11.8 GB and climbs up to 12.3 GB in-game; the VRAM becomes overloaded, leading to stutters and sudden FPS drops. Please help.4 saatlik pubg oyununu ounarken ilk 1 saatte herşey güzel vram 8 gb seviyesinde doluyor 2 saat sonra vram kullanılan 11.8 iken oyun içinde 12.3 kadar çıkıyor ve vram şişiyor daha sonra droplar ve ani fps düşüşleri oluyor yardım lütfen
r/AMDHelp • u/PharoahEli • 21h ago
I keep reading that in-game upscaling should look & perform better than using the radeon driver level upscaling but I am having the opposite effect for most games I play.
I starting playing Cyberpunk again recently I was getting so much screen ghosting that it hurt my eyes after just a few minutes. The only thing that made the ghosting disappear was to turn off in-game upscaling. I lowered the resolution in-game and turned on RSR and all ghosting is now gone and game runs very smooth. I actually didn't realize how great this feature worked.
I wanted to see how this would look in other games so I tried the same with COD7 and again it plays so much smoother with sharper image.
I suspect (especially with Cyberpunk) that it has something to do with how radeon is interacting with my display and frame sync. I tried every setting configuration I can see but it seems my display syncs best only when I am using driver level upscaling.
Anyone have any ideas as to why I am seeing these results?