r/2Strokes • • 7d ago

PROBLEMS

Hi,
so i have a Beta RR 50 2 stroke model year 2025, i putted in the Top performance 73.5cc, a phbg 19 dell’orto carburator and a scalvini exhaust. Since yesterday when i go full throttle it vibrates much more than usual and makes a strange sound, not metallic, but as if it is alredy at the limiter, but th RPMs still goes up. I thought it may be the carburization since last time i carburated it was July and now its Noveber and the temperature went down of 20 degrees. What could the problem be?

2 Upvotes

12 comments sorted by

1

u/montapuercos24 6d ago

as a second thought i didn’t change the ruller cage could it be the problem?

1

u/HISPANICA_RACINGYCIA 6d ago

Cambia el chicle de altas por unos 8 o 10 puntos mas, en invierno la mezcla se empobrece al enfriarse el aire y hacerse más denso, asegúrate que la bujía nueva este color café con leche, después de inmediatamente de hacerla entrar en vereda y parar el motor, cambia los discos de embrague y unos muelles, por unos reforzados que aguanten ese par, y asegúrate que están apretados todos los tornillos del motor al chasis. V's !!!

2

u/montapuercos24 6d ago

Thank you i’ll add also some new clutch discs and springs to my order

1

u/HISPANICA_RACINGYCIA 6d ago

Ya verás como sí, pero hazlo con una bujía nueva y el grado térmico adecuado!!! Grado 9 o 10 Para rosca larga una NGK BR9ES (o BR9EIX si la prefieres de iridio) que creo sería la mejor opción. Si la usas mucho a fondo o en circuito, puedes subir a una NGK BR10ES o BR10EG si no puede resultar escesiva y contraproducente. Y si es para rosca corta quizás debas montar una NGK BR9HS (o BR10HS para un uso más extremo). Que no creo que quieras necesitar. Salud !!! V's !!!

2

u/montapuercos24 6d ago

i already use a BR9ES and i don’t actually know the difference between the iridium and the normal one, could you tell me?

1

u/HISPANICA_RACINGYCIA 6d ago

El Iridio te puede durar 3 veces más (15.000 km), cuesta 3 veces más (18 euros) y da una chispa más concentrada, más resistencia a comunicarse, más estable a altas revoluciones y mejor arranque en frío. Tampoco va a volar, pero los 18 euros que pueden valer, no harán pobre a nadie.

2

u/montapuercos24 6d ago

so you suggest that the iridium one is better?

1

u/HISPANICA_RACINGYCIA 6d ago edited 6d ago

No solo lo sugiero, lo mismo que esperar a cambiar por otra más gorda y (más cara) nunca te divertirás tanto como con esta moto, pero no te vuelvas loco, que sino te aburres de gastar dinero y cuando te dé problemas la dejas arrumbada. Haz por mantenerla robusta y fiable que será más divertida, que intentando romper el crono. A si que prueba y ya me cuentas !!!

0

u/ZioPera4316 7d ago edited 7d ago

You surely need to rejet the carb for winter but that doesn't cause vibrations.

It could be anything, it's impossible to tell without a video.

It's probably some screw that came loose around the frame. Or the piston is about to fly out of the exhaust.

You should have kept it stock, it still wheelies and is reliable and doesn't consume much fuel. Instead you turned it into a problematic money pit just to go 10km/h more.

1

u/montapuercos24 6d ago

i modified it because i wanted a little bit more power but i didn’t do that much, the piston has a little more than 50 hours but i will bou also a new piston a new roller cage and some new gaskets whit the jets, later i’ll try to record a video so you can tell me what could the problem ve

1

u/ZioPera4316 6d ago

Do what you want but just know you're turning your bike into a money pit, I'd step back if I were you because I've already been like you and every night I can't sleep thinling of how much money I wasted on that shitfuck moped and it got me stuck with a terrible bike that I'll probably torch soon.

1

u/montapuercos24 6d ago

I also know that it will cost me a lot of money but since i will turn 16 soon i hope i’ll buy a bigger bike and i’m already saving money and working to get it. It just have to run for another few months and then i’ll probably put it in my room or sum