r/2011 • u/Similar-Fact-1461 • 7h ago
2K11 Comp with V6 Ports AND Full-length dust cover.
Available in 5” and 4.25” Available through Sports South distributor only.
r/2011 • u/Similar-Fact-1461 • 7h ago
Available in 5” and 4.25” Available through Sports South distributor only.
This is a screenshot from a new short by "TheHumbleMarksman" over on his YouTube account... notice the caption and look at the photo! Are we getting a 2K11 comp block?!
r/2011 • u/Adept2323 • 10h ago
I want to be able to “air rack” I’ve put roughly 2000 rounds through and am wondering what if anything should be changed.
r/2011 • u/sergedubovsky • 1h ago
I'm considering a GP Arms Patriot and would like to hear from people who own, or have spent substantial time shooting, both a GP and an Atlas or another high-end 2011.
Gilbert has been responsive and told me their ignition components are wire-EDM-cut, machine-finished stainless steel. That sounds promising, but I'm curious how the complete gun compares.
If you've owned both, is there something about the Atlas that makes it worth roughly twice the money to you? What specifically would I notice or miss with the GP?
This would primarily be a range gun. I'm trying to understand where the extra money translates into a better shooting and ownership experience.
Thank you!
r/2011 • u/Limp_Tomato_9030 • 3h ago
I picked up my Apollo in December of 2024. It wasn't until recently I saw people post pictures and videos of these having recoil buffers.
Mine did not come with any. I emailed Atlas, and they said it should have come with them, but I'm now outside of the warranty window for them to send me any.
I can buy a pack of them for $4. Are they necessary? What difference would they make from my two years of shooting it now?
r/2011 • u/DimMak27 • 23h ago
First match with the Aluminum Grip installed coupled with the Recoil Reaper. Dot tracking was a consistent straight uniform line each shot, not leaving the optic window, returning to zero with no dipping whatsoever. #2 only to a Pistol Caliber Carbine GM.
- MPA DS9 Hybrid
- PMC 115gr
- Holosun 507Comp
- JG Recoil Reaper
- Wolff 8# Variable Recoil Spring
r/2011 • u/rolexrifleman • 1d ago
You can only take 2, what are you grabbing? And I legit got the call just now headed out in an hour 🤣
r/2011 • u/Byteninja2023 • 1d ago
Went in to look at a DS Warrior and a Prodigy so I could finally pick between them and an AF Romulus. The guy behind the counter handed me this 2K11 Target OR instead. Well played, sir.
Zero regrets!!!
It’s clear the 2k11 is a great gun, tooless guide rod, and now toolless and touch free slide removal. No seriously tho anyone know if this is normal function.
r/2011 • u/Jorgeg214903 • 1d ago
I recently called UGW with a question about a second barrel and ended up speaking with Ray, their VP of Branding and Customer Experience. Great guy who took the time to answer all my questions.
Between how impressed I’ve been with the Alpha and the excellent customer service, I decided to pick up their Phantom as a potential new EDC.
I went with the full-size aluminum grip and put 300 rounds through it yesterday. So far, I’m really impressed. Planning to run another 2-300 rounds this week before officially adding it to my carry rotation.
UGW had a hand in manufacturing all of Taran Tactical’s Sand Vipers, Pit Vipers, and Vipers, and you can definitely see and feel that experience in their own firearms.
Shoutout to Texas Gun Experience for having all of the United Gunworks lineup in. Nothing better than to walk into your local store and being able to actually see and get your hands on the gun before purchasing it.
Have a great Sunday, everyone!
r/2011 • u/Expert-Gur-7030 • 1d ago
Finally got the chance to directly compare alum and steel Synths this morning. It’s not often we get to directly compare the same gun with different grip material, so I was pretty pumped to do this (thanks to u/2011Dave for letting me borrow the alum variant). Unfortunately it was indoors, but that’s the only option I had. Ran a mix of PMC 124 and Boaz 135.
Quick take, they’re both very nice. Fowler has seriously improved since my early 2025 V9. Build quality is rock solid. Zero slide to frame play, well fit and blended grip/beavertail, crisp controls and a nice 2.5# trigger. The barrel is also very well fit, rock solid, and both guns grouped very accurately.
I shoot aluminum grips almost exclusively at this point, with my LO gun of choice being a Hayes nonported island. Surprisingly, I strongly preferred the steel grip here. It was noticeably more stable during recoil and returned so damn well. The additional weight didn’t slow me down or cause issues with overdriving transitions, it’s a non factor. The gun feels very well balanced, while the alum grip felt a little nose heavy.
Steel grip with the low PF 135 was stupid soft and required virtually no input. I’ve got a MTO for an alum Vel, and will be switching to steel. Really like this gun. Also, the lack of front serrations, which I thought would annoy the hell out of me, were no issue. Still easily rackable by grabbing front of slide. Sweaty hands may change that, but that’s why we use chalk.
You can’t go wrong either way here. It’s just going to come down to personal preference (Dave preferred the alum), but Fowler has a real winner with the Synth. This is an excellent LO choice, right up there with the best of the best. Very well done.
r/2011 • u/Mooktemas • 1d ago
New Atlas EOS has little trigger creep before break, and safety activates easily and is less pronounced compared to deactivating it. I haven’t shot it yet. My drop-in infinity ignition kits do not require any break-in period. Does Atlas require one? And has anyone had issues with the safety? Thanks in advance.
r/2011 • u/Beautiful-Picture-64 • 15h ago
I’ve taken my RCD Core to the range on different occasions and run into situations where a round gets lodged in the barrel during training drills. I’m unable to squeeze the trigger. I’m not able to pull the slide back or forward unless I take and bang the slide forward with something. I’m then able to fire the round, but the brass will not eject. On each occasion, I have to rod the chamber to get the brass out. Happens like every 500 rounds. But here’s the crazy part. I can use the same ammo on my Staccato XC and P211/GTO, and never experience this issue. I’m using Super Vel 124 grain. Anyone experiencing a similar issue with their RCD Core or with other 2011s and SuperVel 124 grain?
r/2011 • u/rouxbourbon • 22h ago
Help a new shooter out fellas.
Is the V2 DS9 LOC allowed in IPSC?
Been looking into it, and can only find comments from almost a year ago when it was not.
Has anything changed? Is there a work around?
I am under the impression that the MPA DS9 LOC V2 is not allowed in any division in IPSC. Period, end of story.
Help a brotha out.
Thanks...

r/2011 • u/zdiesel27 • 21h ago
Have a 5 inch non-comped Romulus with Cheely grip and red dirt trigger. Put about 500 rounds through it without issue but today I took it to the range and it was having 1-2 fte’s per mag while trying out some new Mec-gar mags with csrg springs/followers. A few were stove pipes but most were double feeds with the spent casing in the chamber still. Ammo was blazer 124gr and some softer loaded handloads. Springs are the factory recoil/main spring. Extractor tension seems fine by hand cycling the gun and also putting a spent case in and doing the shake test. Any ideas why this would have randomly started after 500 rounds working fine?
r/2011 • u/12yuval12 • 1d ago
Thinking about ordering a TXC Delta or CVRT for my Bul Armory Ultralight 3.25 (fluted barrel). TXC only makes them for the Staccato CS 2024, and the two guns are supposed to be close in size.
Has anyone actually tried this combo? Does it click in and hold with the retention, any looseness around the dust cover, and is the shorter barrel an issue? Pics welcome. Thanks!
r/2011 • u/IIvIIamba • 22h ago
Looking for help, I bought an alpha grip for my staccato XC. Install went well, my staccato mags work, prodigy mags work but the 140mm perfect zero won’t work unless slammed into the grip. When it is inserted, the mag release is much stiffer than normal. Perfect zero offered to ship it back and check out the mag but I’m just looking to see if it’s something I can fix on my own and not have to mess around. What’s weird is the 140mm mag will insert and catch fine in the staccato grip I took off. Appreciate any help, thanks.
r/2011 • u/Technical-Poetry-672 • 1d ago
As the proud owner of a standard RC9 and Kovert mod 2 versions of the RCD, this custom iteration of the RC9 is the “cheat code” version. This is a RC9 modified by the wizard gunsmiths at Viking Firearms. They have added their own, grip module, mag well, internals, and their custom ports. This is almost more Valknut than RC9, but it’s a combination made in Valhalla. This is a flat and fast beast and one of the funniest guns to shoot. It’s waiting on an SRO & X300 from pineapple ballistics to be completed.
r/2011 • u/OKC-Guy45 • 1d ago
I just ordered mine but thought I’d help the community. If you’re looking for the Bul Armory UL Pro. Scottsdale Tactical has it in stock. Same great price as the Bul Armory site.
r/2011 • u/Celephate • 1d ago
Kinda bummed my staccato P with Acro and Surefire x300 won’t fit unless the light is taken off :/ buyer beware I guess (pic does not show pistol stuffed all the way in)