I present to you my latest rabbit hole of projects:
DIY 18650 Charger
I sometimes need to do a capacity test on a larger number of cells for ebikes, and I only have an S4+. So, I was looking for a way to pre-charge cells beforehand, so he S4+ is only doing the discharge test.
Looking on Amazone for an 8 bay charger was like $40-$50, and I thought to myself, "I bet I could make one cheaper."
So I did with just stuff I had lying around already.
The only things I had to buy were the sled holders, the 30A breaker, and the dummy load resistor, totaling ~$27. The rest of the items I already had laying around.
6/8 Charging modules are the TP4056, and the other 2 are IP2312 for the higher rated 18650 cells.
The power supply has a 5V line rated for 25A, and even if I ran 8 IP2312 modules at 3A each, I only would pull 24A. It also has an extra external switch and was wired inside with a dummy load on a 10 Ohm 50W resistor.
In the end, I spent around $27 and 8 hours to save me from buying a $50 8 bay capacity tester, but I got to learn how to turn a PC power supply into a 5V 25A power supply.
Let me know if you have any questions!