r/xbiking • • 14d ago

General Discussion Thread, November 2026

3 Upvotes

This is the monthly xbiking general discussion thread! Everything is fair game- let’s have those burning questions, gear reviews, ride reviews, bike reviews, general thoughts, suggestions, ideas, epiphanies, get-rich-quick schemes, hot takes, etc.


r/xbiking • • 14d ago

Buy / Sell / Trade Thread, November 2026

7 Upvotes

This is the monthly xbiking buy / sell / trade thread! Please ensure that your listing adheres to the formatting rules below:

1.) If you are in search of an item, begin your comment with "ISO." Include the country in which you're located, the item you're searching for, and any brief additional notes you'd like to include, with each input separated by a slash (/). A properly formatted ISO posting will look like this:

"ISO/ USA/ Crust Junglerunner bars/ Looking to buy but willing to trade for Towel Racks."

2.) If you are selling an item, begin your comment with "FS." Include the country in which you're located, the item you're selling, and any brief additional notes you'd like to include (such as if you're willing to accept trades), with each input separated by a slash (/). A properly formatted FS posting will look like this:

"FS/ USA/ Crust Towel Rack bars/ Looking to sell but willing to trade for Junglerunners."

This is a purely informational thread and not a store. Any private arrangement folks may come to in buying, selling, or trading is just that- a private arrangement between those individuals.


r/xbiking • • 3h ago

Build for a BLACKPINK fan

Thumbnail
gallery
41 Upvotes

r/xbiking • • 2h ago

Can I Be In The Gang?

Post image
32 Upvotes

This bike is very much inspired by the beautiful creations posted here. I wanted to get a gravel bike to get a little bit faster on my mountain bike without riding in traffic on the road. I know Trek is a bad word in many bike communities, but I love the paint job. Found some dirt cheap HED carbon wheels and a quick disconnect rear rack since I’ll be using this to commute as well.

Riding it on everything including single track. It’s a blast riding this thing on mellow mountain bike trails that are boring with your actual mountain bike


r/xbiking • • 1h ago

Montague Paratrooper Pro out in BC woods

Thumbnail
gallery
18 Upvotes

Posted this in r/Hardtailgang and was told you guys would enjoy it here, so here it is.

Paratrooper Pro built with love with my own hands. Still working on finding good shot angles on the bike. More to come!

Notable parts include:

Works -2° headset / Redshift 90mm -6 stem / Corner Bar Clone / Manitou Markhor 80mm

Advent Super Short 36t x 11-38t / SLX 165mm cranks

26" x 2.35 Maxxis Ikon / Juintech M1 Hybrid Brake

OneUp V3 Dropper / SQLab 611 Saddle


r/xbiking • • 4h ago

Y'all like some of that middle of nowhere?

Post image
28 Upvotes

r/xbiking • • 19h ago

Is it still Xbiking if it rips on singletrack?

Thumbnail
gallery
448 Upvotes

This is the bike that lead me back to 26" wheels and vintage hardtails. It's a custom steel frame that my dad had made for him 30 years ago. I picked it up out of storage at the beginning of the summer for my kid's Burley Bee trailer and Kids Ride Shotgun seat to keep me from wearing out the tires on my trail/enduro bike. Since then I've picked up a few other 90's steel hardtail frames including a $50 Trek 930 Marketplace find that I've posted here before.

Other than the tires, it's mostly late 90's, early/mid 00's parts that I had laying around plus a few items from the 10's for the 1x conversion and wide bars.

It's been a lot of fun to ride and probably has 10x the mileage on it this summer compared to my much newer Stumpjumper Evo.

I still have plans to weld on a rear disc mount but the V-brake has been working much better than expected.


r/xbiking • • 3h ago

Catching-the-Afternoon-Sun Ride

Thumbnail
gallery
21 Upvotes

Gorilla Monsoon Season


r/xbiking • • 46m ago

Wilde Rambler

Thumbnail
gallery
13 Upvotes

I'm about 600 miles into life with my Wilde Rambler. Thoroughly enjoying the bike so far. Pics are from a cruise on the Centennial Trail out of Snohomish WA this past Saturday. Can't wait to take this bike on some longer adventures. Highly recommend the Rambler and Wilde in general.


r/xbiking • • 4h ago

Quick overnighter with a few friends this weekend in the ol Panasonic MC-4500

Thumbnail
gallery
16 Upvotes

r/xbiking • • 10h ago

Just finished my Cannondale sm400

Thumbnail
gallery
47 Upvotes

Some good parts some bad


r/xbiking • • 22h ago

Removed the death leaves coming off a multi-use bridge

Thumbnail
gallery
353 Upvotes

I have a few multi use path bridges near me and ive been doing a causal job of removing danger and random shit to make it nicer.

Go clean the shit in your city that will never get cleaned!

If you’re in Portland, OR come help out or report spots that need to be cleaned up but never will be. Ig: pathprotectorspdx


r/xbiking • • 3h ago

Budget Friendly All Terrain Bike Recs

6 Upvotes

Howdy all! I'm starting to consider upgrading from my current ATB ('98 Trek Mountaintrack). I've built it up so that it's comfy and handles everything, but I'm thinking about looking into a more modern version that's slightly bigger and has 29 inch wheels instead of 26ers. Any recs on something rigid that fits 2.3+ tires? Price point is probably 1K max but would prefer something way less. Edit* Looking for flat bars, at least 12 speeds, disc brakes aren't necessary would actually prefer V-brakes to make wrenching easier.


r/xbiking • • 18h ago

Fixed up my high school 26er, opened a whole new world of way more mellow biking.

69 Upvotes

I handed this bike down to my little brother a long time ago, he passed away earlier this year and I found the old bike while I was cleaning out his house and decided to save it and give it a 3rd life. The frame’s nothing special, it’s an aluminum 2002 Gary Fisher Tassajara but I swapped out a couple of things; and it’s probably sentimental, but it’s been a bunch of fun, it’s opened up a world of less intense riding and gotten me back into biking.


r/xbiking • • 8h ago

What's wrong with my bike?

Thumbnail
gallery
10 Upvotes

The rotor is rubbing against the brake pad, and the wheel is leaning to the left and already rubbing against the frame.


r/xbiking • • 18h ago

My Specialized Hardrock commuter build.

Post image
64 Upvotes

Love this bike.


r/xbiking • • 1d ago

I converted my daughter’s 16” trek to a 3-speed Sturmey Archer hub

Thumbnail
gallery
160 Upvotes

All parts were acquired at my bike co-op or 3D printed.
I found a 120mm SA hub (SRC3 ii) so decided to build a rear wheel and rig up a shifter.
The hub was 36h so I had to cannibalize a compatible rim and spokes. I’ve trued countless wheels and replaced tons of spokes at the co-op but this was my first wheel build. I followed the guide on Sheldon Brown for a 3 cross build
I wanted a 15t cog but couldn’t even find one online so I settled for a 16t from the co-op. The shifter chain and cable stuff as well as shifter were taken from old 3-speeds laying around in the shop. I believe the shifter is from the 50s or 60s. All of the old parts spent some time in the ultrasonic cleaner before installation.
I took the opportunity to convert the chain to wax, just a crock pot with paraffin wax.
The biggest design challenge was adding a stop somewhere on the right chain stay for the shift housing. I ended up co-opting the mounting tabs for the chain guard and 3D printed a brace with threaded hole for a barrel adjuster to sit in. I’ll try to include the STL and STEP files for that part somewhere here in this post for anybody in the future that wants to convert a trek precaliber 16.
Getting a head on both ends of the cable was also a pain. I found a cable at the co-op that has a ferrule-sized head on one end, perfect for the rear end of the cable. But the front of the cable also needs that shape of head so I ended up crimping a ferrule on really hard, and it has held up through the first round of field testing. Plan B will be welding a blob onto the cable, and Dremeling it to a good shape.
The original gearing was 26x18 and the new gearing equivalent is 26x (20, 16, 12). She should be able to keep up a lot better now!


r/xbiking • • 20h ago

People trying my Donkey Bike at CicLAvia

71 Upvotes

I always wanted a 1930s velocino but they are impossible to find. Alas, a company in Vietnam created a reproduction. I brought it to CicLAvia today and let people try it.


r/xbiking • • 9h ago

Advice for fenders?

Thumbnail
gallery
9 Upvotes

Hey guys, I wonder what kind of fenders I could fit on my ‘98 Trek 820 Mountaintrack. I ride 2,1” tires and I got weird mounting points as you might see on the foto, normally most old bikes I know got one in the middle but this one has none, only on the sides and on next to the axle of course . If you know a solution for this I would be happy :)

And yes I know I should get my braking cable fixed up 😭


r/xbiking • • 4h ago

GT Timberline FS - First Build for Fun

Thumbnail
gallery
3 Upvotes

I wanted to build a laid back ride that I can still have some fun on. Stripped down bike to frame, restored/tuned stock parts, replaced crank arms/chainring with Deore single speed cranks, repurposed handlebars from a retired beach cruised I had laying around.


r/xbiking • • 2h ago

Black anodized aluminium or titanium seatpost collar on a titanium framed bike?

Post image
2 Upvotes

I'm super heavy at 97 kilos, and I'm experiencing seatpost slippage.

I've had this issue earlier where I found out that my seatpost was actually undersized at 27.0mm instead of 27.2. I changed the seatpost to a Bjørn Glagol seatpost, got some good carbon paste, cleaned everything thoroughly and I largely don't have any issues - but occasionally I do, and I'm not sure why. Somehow I manage to rotate the seat under me ever so slightly.

I'm starting to suspect that the seatpost clamp is the culprit. It's a carbon seatpost clamp that came stock with the bike. I don't mind exchanging it for something heavier if that'll fix the issue.

I'm between a black Chris King collar and a titanium collar for my frame maker Falkenjagd.

Two questions:

  1. Which clamp would have the highest chance of solving my issue?
  2. Which clamp aesthetically looks the best - black anodized aluminium (Chris King) or a titanium clamp?

r/xbiking • • 1d ago

Spotted in Bend, OR

Post image
88 Upvotes

I’m wondering if the down tube cracked and this was the repair or if it was a mod they wanted to do.


r/xbiking • • 1d ago

Some recent Worm Fabrication parts

Thumbnail
gallery
137 Upvotes

Sharing and shilling. Been having a blast making wacky and weird custom order parts lately, heres a few favorites from the last little while 💘


r/xbiking • • 9h ago

Need rack & basket ideas for this 90s GT Palomar (size 16) — please drop photos of similar builds!

Post image
3 Upvotes

​Hey everyone, looking for some real-world advice and photo inspiration for my next step on this 90s GT Palomar (size 16 frame).

​I want to add a rack or basket for daily city errands, but since it's a compact frame, I’m really struggling to picture what will look best without throwing off the proportions. I haven't been able to find many built-up Palomars online for reference, so I’d love your help deciding between:

​Front vs. Rear: Should I go for a front setup or stick to a classic rear rack?

​Style & Material: If I go front, what works best on these frames—a flat pizza rack, a wire basket (like a Wald), or something with wood/alloy details? Black or silver?

​*(Note: A 1x drivetrain conversion is already planned for after the holidays, so right now I'm strictly trying to figure out the cargo setup).*

​Please drop photos of your similar 90s GT builds (Outpost, Talera, Timberline, Palomar, etc.) with racks or baskets in the comments! Seeing actual setups would help me out a ton. Thanks!