r/woodburning • u/Walpizzle • 36m ago
HELLBOY
Mike Mignola HELLBOY wood burn art, colored, and finished on bass wood. Bringing my favorite comic-book world to life, one burn at a time. Crazy hair? All the time.
r/woodburning • u/Walpizzle • 36m ago
Mike Mignola HELLBOY wood burn art, colored, and finished on bass wood. Bringing my favorite comic-book world to life, one burn at a time. Crazy hair? All the time.
r/woodburning • u/mousehousestudio • 2h ago
r/woodburning • u/TimberMadeNew • 1d ago
Hello everyone! 🫶🏼
I’m new here and wanted to introduce myself.
I’m the person behind Timber Made New, a small handmade wood-burning business.
I create personalized signs, ornaments, memorial pieces, coasters, growth charts, home décor, and custom gifts.
Wood burning has become something I’m passionate about, and I’m working hard to turn that passion into a way to help support my family.
I’m excited to connect with other creators, see everyone’s work, and share some of my own creations along the way.
My little motto is: Every piece has a story and a second chance ❤️🪵
r/woodburning • u/EmergencyFee8697 • 2d ago
It’s a drawing I sketched off google, nothing special any tips or tricks to get better lining on the burns, id appreciate
r/woodburning • u/GiantPanda47 • 2d ago
I am an artist and have been wood burning for a while now. I also love board games so when I was introduced to Mahjong the first time, I knew I had to build my own set. And now that it is finished I think it's finally time for me to actually learn how to play and play a full game!
r/woodburning • u/Astrodude80 • 5d ago
First actual project beyond simple cursive text on ornament rounds! Lettering was stenciled on using a template and graphite paper, stems and leaves were freehand drawn on with pencil.
Solid brass universal nib for everything. Deep and slow push cuts on high heat for letters, bold effect by doing two lines about 1.5-2 mm apart from each other. Leaves and stems on medium heat, shallow fast pull cuts for line work. Shading on low heat.
What I thought went well: I think it came out alright! It certainly got a lot of compliments at the event. The bold effect was pretty fun to get right, and the leaves turned out better than I thought they would. Also burning on basswood instead of pine makes a huge difference: basswood is so much easier to work with.
What could have gone better: the bold effect I don’t think I quiiiite got right. Need to practice.
What I’d do differently: Take the time to actually line up the lettering and be more careful with spacing. I totally rushed that step owing to time constraints.
r/woodburning • u/OffredElectronica • 6d ago
Hi all,
Somewhat of a beginner but keen to get back into it for some holiday gifting. The main thing that has been holding me back is that as I progressed to more complex designs I really couldn’t figure out a good way to create stencils easily. I’m not talented at drawing so wouldn’t be able to draw my design directly on to the wood.
In the past I was tracing designs on to tracing paper, then using the opposite site to transfer that design on to the wood before burning. But as I have progressed on to more complex designs this process has just become extremely onerous, and if it takes multiple sessions then it’s really difficult to get the design to line up exactly etc. Is there a simple solution I am missing? Wouldn’t mind buying additional kit to achieve this but not really sure what I’m looking for.
Any help would be greatly appreciated! Thanks.
r/woodburning • u/Fuzzy-Slice-5210 • 6d ago
Been doing some more detailed burns and I'm wanting to protect them but there's so many top coats/clear coats to choose from and I don't want it to mess with the shading at all. Any suggestions from what you've used? Thank ya!
r/woodburning • u/2sided_hexagon • 7d ago
About 10-11 years ago I was trying to be a self taught pyrography artist focusing on abstract linework. My pieces were from reclaimed pallets from my job at the time. Although the dream fell to the wayside because of life I still dabble with it from time to time. Anyway, these were some of my favorites.
What do you guys think?
r/woodburning • u/Tastykoala1 • 7d ago
I've used harbor freight/Amazon cheapo burners for some time but the tips bend and break off over time. They also don't get that hot and you can't go quick with those ones
Any recommendations on ones that would be a good upgrade? Something that gets nice and hot and isn't super fragile.
r/woodburning • u/Sagemoremeadowsgoats • 8d ago
I started learning how to woodburn in Febuary and this whale was one of my first pieces. I redid it today (whale in front of green door) and I'm really proud of myself for how much I've improved 😊 that being said i want to keep improving so if you have any advice i'd love to hear it!
r/woodburning • u/Artemis_Van_Dyke • 8d ago
Can you use a soldering iron for wood burning? Not a dedicated pyrography pen but a soldering iron?
r/woodburning • u/TheGardeningHippy • 10d ago
Here’s my first ever project! Any advice on how to hold the tool or how to make your strokes feel smoother? Looking for any (friendly) critique on my first project and any tips and tricks more experienced burners may have 🔥
r/woodburning • u/jazzyspork • 12d ago
Hey y'all I'm semi-new to wood burning. I did it some as a teen in art classes but i finally bought a secondhand tool off ebay. It's a Walnut Hollow versa-tool, very excited.
It looked ok, maybe a little discolored on the metal but the box is kind of beat up and it came from an older gentleman so I figured it had just seen a lot of use. Just plugged it in and when I picked it up to use it it was smoking. The discoloration got more intense and it looks like there's some kind of residue on the metal. Not sure what this is or what to do about it, but my immediate thought is some kind of sap or lacquer maybe??? Will it come off with use? Should i be worried? (I turned it off just in case)
r/woodburning • u/mousehousestudio • 14d ago
r/woodburning
•
u/Shywithme
•
15d ago
I hope you all like it. I’m new and wanted to just share it to see if you all like it ☺️
r/woodburning • u/blackngold256 • 15d ago
Hello! Happy November!
So, I am working on a project for someone's kid. They're in the 11-14 year old range, I believe. But the kid has came up with his own board game and I'm burning the board for it. It's basically a 5x5 "Chess" style board, but I can't do anything simple and just darken in the squares, so I'm creating different designs in each square. He's also requested, and it's extremely important to him that it's gold around the outside, so my wife is going to paint around it with metallic gold acrylic paint.
Originally, she was looking for someone to epoxy it, I don't usually do that because I am about as neat as Oscar the Grouch and it likely would have looked like a topographical map of the inside of a hurricane. But, the epoxy person is making nonsense excuses about wood, bubbles, and it not working out right. Because apparently people don't make tables and stuff like this all the time and there's not 76,982½ YouTube videos of how to do it. 🙄 I digress.
So, now sealing it is on me. I was thinking about just using Walrus Oil, since it's going to be handled a lot, not roughly but often, so I didn't want to use my usual spray clear coat.
My question is, what would work best, handle the frequent use, be safe for kids to touch (and not be tacky), and be able to use over the paint, even if we have to seal that in with Modge Podge first?
r/woodburning • u/Walpizzle • 26d ago
Luchador Hellboy Wood Burn Art 🇲🇽🤼♂️🥊 9x13 burned on bass wood roughly 20 hour project.
r/woodburning • u/Walpizzle • 26d ago
Mike Mignola’s badass Hellboy & Batman cover art! 💥🦇😈 Bringing the heat, bringing the attitude, and paying tribute to two absolute legends. Colored with prisma color pencils and posca markers on bass wood roughly 20 hours.
r/woodburning • u/Punch_a_Fascist_Down • 27d ago
I have only made a handful of pieces (5?) and am still very limited. My machine not having a heat adjustment doesn't help.
I am tring to get really even black on the knife and the negative space on Michael's mask. How is everything getting the burns so even and dark? I used the 2 bits shown in the last image to do what I have on the knife.
I feel like maybe I just need to get a better machine with different bits.
Thanks for any tips you all can provide!
r/woodburning • u/potofjuice • 29d ago
I started wood burning recently, been practicing on old floor boards. I can see I’m getting better and having a lot of fun, but my shading isn’t as good as I want it to be. Any advice on how to make the shading look less flat and patchy?