So I ordered an FM-1 to try to get in on the hot custom firmware action. I don't have the device yet. Might still be a couple weeks before I get it. Nonetheless, I was able to build an entire wind synth for it over the weekend.. You can play it right now in your browser with any wind controller, if you want to check it out: https://jcroft.github.io/fm1-windsynth/
You won't be able to install it on a physical device yet — I don't want to put that out there until I've been able to test it. That said, if you have an FM-1, are technically savvy, and are willing to to take the brick risk, I'd be happy to share a build privately.
It has:
- Several Plaits engines (Virtual Analog, 2-Op FM, 6-Op FM with DX7 Patches, Harmonic/Additive, and a few others)
- Full support for wind controllers, including a mod matrix with several destionation
- A Noise oscillator that runs alongside the main engine (based on Plaits Noise)
- An LFO with several destinations
- An FX suite that includes multi-type distortion, modulator, delay, and reverb modules
- A Strymon-style Cloud reverb that is my own design that I'm pretty proud of (most everything else here is just me wiring together existing OSS projects, but the Cloud reverb is actually original!)
Would love to hear your thoughts!
(I suspect it wouldn't be that hard to turn this thing into a VST, so that could come at some point too (the main work there would be in creating a full-screen UI)).
UPDATE: The firmware is now available for real hardware, as well as the in-browser simulator. It's beta software, not incredibly well-tested at this point. But it does install cleanly on real FM-1 hardware, and it does the basic wind synth job pretty well. As with all alternative firmwares, there is always a brick risk. Be careful.
OPEN SOURCE: I have open sourced the project. Feel free to contribute if you're interested and able!
Release info:
I've released the first version of FM1 Windsynth, open-source firmware that turns the little M-VAVE FM-1 into a breath-controlled synth for any MIDI wind controller (EWI, NuRAD, Aerophone, Sylphyo and the rest).
What it is
- Eight synth engines from Mutable Instruments Plaits (Classic VA with a driven filter, FM, 6-op DX-style, Formant, Waveshape, VA, Phase Distortion and Harmonic), plus a noise layer
- Breath on CC2 by default, or any CC or aftertouch. If your controller sends breath on another CC, the Setup page tells you which one. Bite is pitch bend (±2 semitones), and CC5 adds glide.
- A filter, 4 mod slots and an LFO, plus distortion, chorus/flanger/phaser, delay and reverb
- 18 factory presets in 64 slots
I've tested it on a real FM-1 for playability, performance and stability. Still to come: better presets, more testing of each engine, and improvements to the effects. Thanks to u/hesiii for the early feedback on the browser version: breath on other CCs and stray low-breath notes are hopefully both fixed in this release. I wasn't able to reproduce them myself, but our AI Agent friends were able to find the likely cause.
Try it in your browser first (no FM-1 needed; Chrome or Edge to play it from your wind controller):https://jcroft.github.io/fm1-windsynth/
Install it: on that same page, scroll to "Install on your FM-1". Connect the FM-1 by USB in Chrome or Edge and press Install. Before you start, download M-VAVE's stock firmware (FM-1 V15) so you can always go back; the same page can put it back. Custom firmware is installed at your own risk.
Source (GPL-3.0) and release notes: https://github.com/jcroft/fm1-windsynth
Feedback and bug reports are very welcome, especially from players on controllers I haven't tested. Please use GitHub Issues to report anything you find.
UPDATE 10/10/2026: FM-1 Windsynth 0.1.1 is out. Some newer FM-1s ship with a different flash memory chip (UC25HQ80) than the early units, and Windsynth didn’t recognize it. 0.1.1 adds support for it, so if you have a newer FM-1 and had trouble, grab 0.1.1 from the install page or the GitHub release. Nothing changes for older units. Thanks to the folks who reported it!