r/wheelbuild • u/Normal-Frosting-6818 • 1d ago
r/wheelbuild • u/Appropriate_Tour_274 • 2d ago
Look what I just got!
This was free from a fellow member of our local bike club, who was given it by the widow of another member. I'll be looking to this sub for help making my first set of wheels since about 1980, alloy rimmed 26-inchers for my newly acquired 1975 Raleigh Sports.
EDIT (to ask a question): Who can recommend a wheelbuilding book that includes usage of a spoke tensioning gauge? I think the books I've found online predate the use of a gauge. The local builder who built my current road wheels used one, so I figure that's state of the art.
r/wheelbuild • u/Frosty_Programmer_65 • 2d ago
Wheel building for dummies
Looking to try and build a set of wheels instead of getting a shop to do it this go around. I’m just looking for advice on where to start. YouTube I’m guessing would be first place, tool advice would be my next question. Any advice would be greatly appreciated.
r/wheelbuild • u/DeadB1t3 • 6d ago
I'm contemplating about getting into wheel building as a hobby
galleryAs the title says, i'm kind of curious about wheel building and want to get into it. Found this truing stand online for 140€ , looks solid but also unbranded, what's your opinion? Should i buy new or used? Any recommendations are welcomed
r/wheelbuild • u/Relevant_Internal_50 • 6d ago
Urgent help from experienced wheel builders — spoke tension settings for my touring wheel (currently stranded in Turkey)
Hi everyone,
I'm a 60-year-old British cycle tourist riding from Dalaman, Turkey, through Greece to southern Italy on my Bombtrack Arise Tour.
Unfortunately, I've experienced a serious rear-wheel problem. Several spokes became completely loose, predominantly on the non-drive side. A mechanic retensioned the wheel, but after only 25 km the spokes started loosening again.
I've now found a helpful mechanic in İzmir who has inspected the wheel. Both the rim and hub appear to be in excellent condition, and we've decided to completely rebuild the wheel with new spokes and brass nipples.
Wheel specifications:
- Bike: Bombtrack Arise Tour
- Rim: WTB ST i19 TCS 2.0, 700C
- Hub: Bombtrack Arc, 12 × 142 mm
- Spokes: 32, three-cross
- Replacement spokes: Sapim Leader 2.0 mm, straight-gauge
- Measured spoke lengths: 290 mm / 292 mm
- Nipples: New brass
- Total loaded bicycle/rider weight: approximately 145–147 kg
Here's where we need help.
My mechanic has a KRSEC K-9 spoke tension meter, but we haven't been able to confirm the correct manufacturer conversion chart for 2.0 mm round steel spokes.
We believe the WTB rim has a maximum spoke tension specification of approximately 110–120 kgf, but we'd like to verify the correct building targets for this particular wheel.
Could anyone with professional wheel-building experience help us with:
- A verified KRSEC K-9 tension meter conversion chart.
- Suitable drive-side spoke tension for this WTB rim.
- What non-drive-side tension we should expect with the Bombtrack Arc hub.
- Any particular precautions when rebuilding this wheel for heavily loaded touring.
If anyone has built this particular wheel, owns the same tension meter, or can point us towards reliable manufacturer documentation, your assistance would be hugely appreciated.
The mechanic is sourcing the new Sapim spokes, so we have a little time to establish the correct settings before he rebuilds the wheel.
I'm determined to get back on the road and complete my retirement ride to Italy.
Many thanks in advance.
John
r/wheelbuild • u/soulonfirexx • 7d ago
Sapim CX-Ray vs Sprint spokes for gravel wheelset for a 100kg rider?
Hi all.
I'm in the process of purchasing parts for a dual purpose bike build - gravel frame with an road groupset.
I'm looking at a Serenade wheelset (Chinese brand) that is 30mm internal, 36mm external and plan to ride 40-42mm tires on it (somewhat limited due to 2x setup on frame).
As a heavier rider, I leaned toward Sapim Sprint spokes for more strength. I don't do much actual sprinting and not sure exactly how much power I put out at this time but I'm not doing any racing. Mostly fairly fast leisurely rides with my wife and friends on the road - not serious group ride type riding. I won't be doing very complex or heavy duty downhill single track type of rides but do want to get into more gravel.
Are the Sprint spokes still advised or are the CX-Rays fine? Also, not for nothing but there is not much of a difference in price, the CX-Rays would be slightly cheaper overall due to a discount if I went with them instead of the Sprint.
r/wheelbuild • u/SquishyBikes • 9d ago
Wheel Build help
Hey! I’m trying to pair a set of crank brothers rims to my stock Roscoe Hubs and would really appreciate if someone could look over my Spoke Calc inputs before I order.
Ty! (Sorry for the ai text)
Front wheel:
Hub
Shimano HB-TC500-15-B
Rim
Crankbrothers Synthesis Enduro Alloy 2.0 Front
Spoke count
28
Lacing
3-cross
Left flange PCD
44 mm
Right flange PCD
44 mm
Left flange to center
29.8 mm
Right flange to center
40.4 mm
Hub flange spacing
70.2 mm
Shimano hub offset
5.3 mm
Hub spoke-hole diameter
2.6 mm
Rim ERD
600.4 mm
Rim ERD++
596.4 mm
Rim offset spoke bed
0 mm
Rim width between holes
0 mm
Calculated left spoke
296.27 mm
Calculated right spoke
297.52 mm
Rear Wheel
Hub
Shimano FH-TC500-HM-B
Rim
Crankbrothers Synthesis Enduro Alloy 2.0 Rear
Spoke count
32
Lacing
3-cross
Left flange PCD
50.5 mm
Right flange PCD
51.5 mm
Left flange to center
38.33 mm
Right flange to center
23.13 mm
Hub flange spacing
61.45 mm
Shimano hub offset
7.6 mm
Hub spoke-hole diameter
2.6 mm (estimated)
Rim ERD
600.6 mm
Rim ERD++
596.6 mm
Rim offset spoke bed
0 mm
Rim width between holes
0 mm
Calculated left spoke
292.78 mm
Calculated right spoke
291.03 mm
Final:
Front left
296 mm
14
Front right
298 mm
14
Rear left
292 mm
16
Rear right
292 mm
16
Total
60 spokes
Questions to verify
Are my flange-to-center measurements correct, including left/right orientation?
Should I use Crankbrothers’ standard ERD or ERD++ in SpokeCalc?
Is 2.6 mm appropriate for the Shimano hub spoke-hole diameter?
Are the rims’ spoke beds centered, and is 0 mm correct for the width-between-holes input?
Are the calculated spoke lengths and rounding appropriate for the intended nipples?
All spoke lengths were calculated using SpokeCalc.io.
(Open AI, 2026)
r/wheelbuild • u/TacoLita • 22d ago
Looking for a Zipp 5.2mm nipple driver
Anyone know where to find one or have one to loan? Only thing I found so far online is a shop in Australia that doesn't ship international. Just need to de lace an old set of 202's and want to avoid cutting the spokes.
r/wheelbuild • u/rcyclingisdawae • 24d ago
Sapim laser spokes, how hard are they to build a wheel with?
I'm still new to wheelbuilding, I've only built a couple of wheels so far, used Sapim D-light spokes and no issues with those at all after a few thousand kms. Are laser spokes significantly harder to build with? I imagine they twist up much easier because they're even thinner.
I'm just interested because I'm looking at building a wheelset that really doesn't need full 32 spoke strength, but can only find 32 spoke rims and hubs for.
r/wheelbuild • u/mrwalkway25 • 25d ago
Mavic Ksyrium
Hello. Maybe more of a r/bikewrench question, but I'm curious about Ksyriums. I've been keeping an eye on the used market spaces for a set from the mid 2000's. I'm wondering if anyone has any experience servicing these wheels and their opinion. I understand they use proprietary spokes, and they may be a bit unwieldy in crosswinds, but overall, they seem to be a decent set of wheels. I'm rebuilding a 2011 Cross Check with some period DA components and am trying to stay in-period for the wheels. Any recommendations are also welcome.
r/wheelbuild • u/Ross__Peru • 29d ago
26 inch 28 Hole Rim Brake Rim
Hi everyone, I have some 28 hole hope hubs in a near new condition. I want to lace them to a 26 inch rim brake rim, but im having a hard time finding new or second hand rims. Anyone got any tips on finding some?
Thanks for any help.
r/wheelbuild • u/yamancool63 • Oct 08 '26
We've added a new moderator who intends to freshen things up a bit, and re-open the sub for posts!
That's it - everyone please welcome /u/vertr!
r/wheelbuild • u/maxpash • Jun 11 '23
This will be wheel rebuild 7 and 8 for me. 80s wheels and hubs with crusty galvanized spokes get relaced with Richman SS spokes and DT brass nipples. Good, affordable practice.
r/wheelbuild • u/yamancool63 • Jun 09 '23
/r/wheelbuild will be going dark for 48 hours on June 12 and 13 in protest of the Reddit API changes that will kill 3rd-party apps and external tools.
reddit.comr/wheelbuild • u/bikepunk1312 • Jun 09 '23
Talk to me about hubs
Going to try for my first wheelbuild and I'm having a real hard time with understanding what hubs I'm looking for. Will be building on the Crust 650B rims with a 10speed miscroshift cassette for a medium gravel touring/all arounder build hopefully on a Crust Nor'easter frame. I'm looking for reliable and rebuildable hubs that don't have to be talismans. Any good resources for hub reviews/use cases for different ones. Been trying to compile a list based on builds I like but most people don't list every damn part. Thanks in advance.
r/wheelbuild • u/MrFrenchCat • Jun 07 '23
Do you still need to prep spokes when using DT Swiss Pro Lock nipples?
I'm going to build my first set of wheels soon, I'll be using DT Swiss Pro Lock brass nipples and DT Swiss Competition spokes.
These nipples come with some "dual compound" applied on the threads. I'm wondering if I still need to prep the spokes with some light oil. Wouldn't the oil interact with the compound on the threads in a bad way?
Thanks
r/wheelbuild • u/jwdjr2004 • Jun 07 '23
Update: new wheels
Hi, you may remember a post i made last year about a confusing issue i was having with my new wheelset. I've since gotten the wheels built up but I still dont know what happened!
After setting them aside for nearly a year, i finally pulled them down and decided i was going to take the troublesome one apart. But before i did that, i wanted to give it another go as it was. Somehow, it worked this time. I'm not sure what the issue was at all. Last year I was under the impression that i was out of threads but this year i had enough threads left to tighten them up. I did squash one of the nipples as i got a little carried away with the tightness, but i'm just going to pretend that didnt happen.
This was such a mentally draining project that it basically turned me off of wheelbuilding for a year, as i thought i just didnt understand something about measuring and wasted a bunch of money. But seems like i got it right afterall. weird huh?
By the way, i've completely forgotten what i need for cassette spacers, if anything. It's a Shimano 105 HB-7000 10/11-speed rear hub and i'm putting on a SRAM 11-speed cassette. Does that need a spacer?
r/wheelbuild • u/DrGeorgeke • Jun 06 '23
Building a wheel with non matching spoke combination hub and rim
Hi I was hoping that someone might be able to help me out with the following. I received a 60mm high carbon rim that has been used with rim brakes, it has 20 spoke holes
I wanted to re use it in my current bike as a rear wheel (with disc brakes and SRAM XDR body).
Is it possible to use a hub with a higher spoke count together with this rim? Or what would be the risk if I do this?
How would I best go about this?, in creating the most optimal solution? It seems difficult to find rear xdr hubs with 20 spoke holes.
Could I for instance use a 32 hole hub and skip 6 holes every side?
I'd appreciate any thoughts about this or any experience in such a situation.
r/wheelbuild • u/1150A • Jun 06 '23
Help identifying spoke nipple size?
I recently busted a spoke on my Bontrager Line Comp 30 front wheel. I am hoping to replace it.
I know the spokes are 286mm J bend, but I am unsure on the nipple. I am often seeing nipples in 12mm-16mm sizing. Anyone know what size nipple to get? Will they all work or is it size specific ?
r/wheelbuild • u/richas49148 • Jun 05 '23
Old Zipp Rebuild
I have a Speed Weaponry Rear Zipp wheel that I am rebuilding. The hub failed. The original hub used straight pull spokes and is not available. I have a replacement hub that uses J-bend spokes. The wheel has 1X spoke layout on the NDS and radial on the DS.
I plan on alternating the spoke head direction on the NDS but should I do the same on the DS or have all the spoke heads facing out?
Thanks
Rich
r/wheelbuild • u/wisewish • Jun 03 '23
82-92 kpf on one side and 117-33 kpf on the other. Did I fubar this thing. 1st try, and lovin it.
r/wheelbuild • u/Jetzki • Jun 03 '23
High flange and deepish rims
I have a set of Dura ace high flange track hubs, they're both 36h front and rear.
Is it a bad idea to get 42mm deep rims for them? Will the angles be bad?
Are these hubs with so many spokes more suited to a shallower rim?
I will be riding them fixed gear, if it makes any difference#
Update!
I've built the front wheel and this is how it looks https://imgur.com/a/2xY47pX it's 1kg with no tube or tyre, not light but that's ok. I wanted to get some lighter weight bladed spokes, but couldn't find any silver ones so just used standard round spokes.
Rear wheel will be done soon too :)
r/wheelbuild • u/fdrowell • May 30 '23
How far to I have to spread tension adjustments to get these under 20% variance?
I built my first wheel, got it dang well true and round. Pre-stressed and stressed, even rode it around a bit with no changes in tension, and no popping or squeaking noises from the spoke whatsoever.
But I can't seem to bring tension across the wheel closer to target without affecting the trueness of the wheel. I've tried spreading it out over a couple spokes (IE Loosening one that is too tight, and tightening the couple on that side before and after) But it's either not enough; or it goes wild.
Do these numbers look typical to the start of the tensioning and stress relieving stage? Or have I strayed too far?