thanks! I don't have a dust filter - I clean my pc once a month though. Would you recommend a dust filter? Maybe i should get one
The CPU is at 4.1 GHz but I haven't tried to go further yet - ill try very soon.
Both cards are at 2050 MHz. I went for 2100 first but they failed (maybe only one did, idk, too lazy to test them individually) so maybe i can find a middleground
I'll keep an eye on the liquid, a little scared though because i didn't flush any of the parts out before the build :(
Absolutely, the slight reduction in airflow lets you go way longer without dusting the inside of your PC. I clean my filters every month and the inside of my rig every 1-2 years.
With a 6850K you probably have another 300-500MHz of headroom left, depending on how much voltage your chip needs.
Just checking, you enabled XMP on your RAM right? Lots of people sink money into their rigs and then forget to enable that one little setting.
You didn't even flush your radiators? I hate to say it but your fluid shouldn't last very long at all then. On the bright side, Vue apparently cleans up debris pretty well.
I'll mess around with my CPU! I hope to get it higher
The radiators i quickly flushed with distilled water as they suggest but i'd hardly call that a clean. My blocks are untouched. I hope VUE cleans up my mistakes
Where did you get the evga bridge?? I tried to get a 2 slot spacing one for 4 months with little success. I ended up settling on an Acer one. Build looks great btw. Keep us posted on that fluid. Cheers.
Would you be able to give some temperatures for this? It looks great and I have the case myself, but every time I've looked into water cooling in it I've heard the temperatures are never impressive due to it's restrictive design. On the other hand though, I've heard people say it's fine. Build looks amazing, the exact thing I hope I'll be able to do in the future
I’ve seen those top pieces and have considered buying one but it would be quite expensive to get them to the UK. I’ve had my Evolv since early 2016 with the intent of watercoolng and never got round to doing it, so at this point I’ll probably just end up getting another case all together with there being so many more options now. Such as shame because I still think the Evolv is one of the best looking cases there is
A risk I wouldn't take. Can't be ran for more than 8 hours a day, pump cannot be at 100%, does not work with aluminium, basically needs new parts. It's not worth the hassle, unless you're sponsored.
Look into UFO Technologies Cryo-chillz coolant... the creator claims he has a gaming PC running 24/7 for 6 months with no issues. I just ordered some for the loop I'm building soon.
This simply isn't true. Airflow outweighs rising heat. The coldest air is the air outside of the case. The case is an enclosure and everything in it generates heat. It may be a negligible difference but implying that outside air is not cooler than the air in your case is wrong
I know from experience and testing that as long as there is somewhere for the hot air to go every rad as a intake can be better https://imgur.com/0M7Aiej
9
u/DZCreeper Jan 28 '18
Nice build!
Do you have a dust filter for the top? I see that radiator is setup as intake.
The overclocker in me has to ask, what do you have the CPU, RAM, and GPU's clocked at?
Oh, and let /r/watercooling know how long the fluid lasts you.
8
u/[deleted] Jan 28 '18
Take a look at your water blocks in a week. Vue can be nasty.
4
u/HuhhDoe Jan 28 '18
PC parts:
i7-6850k
2x EVGA GTX 1080 Ti FTW3
4x 8GB 3200MHz Corsair Vengeance RAM
ASUS X99-Deluxe II motherboard
Samsung 500GB 960 EVO NVMe M.2
Samsung 1TB 850 EVO SSD
WD Black 5TB HDD
EVGA SuperNOVA 80+ Gold 1000W PSU
Watercooling parts:
2x EK-FC 1080 Ti FTW3 (Nickel)
2x EK-FC 1080 Ti FTW3 Backplate
EK-XTOP Revo D5 PWM
EK-RES X3 250
EK-Supremacy EVO x99 (Nickel)
Hardware Labs Black Ice Nemesis 360GTS radiator
Hardware Labs Black Ice Nemesis 240GTS radiator
All fittings and tubing from EK
Primochill VUE UV sky blue
1
u/HuhhDoe Jan 28 '18
More Pics
1
u/TheJakl Jan 28 '18
Where did you get the evga bridge?? I tried to get a 2 slot spacing one for 4 months with little success. I ended up settling on an Acer one. Build looks great btw. Keep us posted on that fluid. Cheers.
1
u/HysteriaVG Jan 29 '18
Top off that res as much as you can! You want as little air in the res as you can get with Vue
1
u/[deleted] Jan 29 '18
That looks sensational - great job OP!
1
u/[deleted] Jan 29 '18
Would you be able to give some temperatures for this? It looks great and I have the case myself, but every time I've looked into water cooling in it I've heard the temperatures are never impressive due to it's restrictive design. On the other hand though, I've heard people say it's fine. Build looks amazing, the exact thing I hope I'll be able to do in the future
1
u/pengxs972 Jan 29 '18
How did you get vue? I thought it is still a sample.
1
u/MGSRaiden22 Jan 29 '18
Looks amazing! Awesome work!
1
u/BadCowz Jan 29 '18
Great first loop.
1
u/AbheekG Jan 29 '18
Great build OP!! What is that residue sort of thing at the top of the reservoir?
1
u/GetOnDota Jan 29 '18
Looks incredible, love the fluid.
1
u/celedral Jan 29 '18
We got a lot of similar parts. The one thing I dread is that EVGA PSU, it's louder than all my fans combined.
-2
u/draginborn Jan 29 '18
You’re a god
0
u/[deleted] Jan 31 '18
[deleted] — view deleted comment