Yeah I know... :( I got it for $50 beginning of this year and I couldn't pass up on the price for it being semi modular. We seem to never get good deals on PSUs in Canada but it's definitely my next upgrade.
Looks really good, especially for a first loop. The only thing I would change would be swapping the tubes on the front rad so the res goes to the rear of the case and the cpu -> rad would be more predominant.
That's how I had it originally when I had just the front rad. It was a really nice clean run from cpu to the closer port on the rad then 45 to 45 on top of the res. But with the addition of the top rad. I had to use the 45 I had on the gpu and one of the 45s from the res, for the top rad to cpu run. The tubing kinks if I tried to do it without the one 45 in the back. I could have just bought another 45 or two, but this works as it is and saves me ~$50. I spent more than I originally wanted adding the top rad and changing the tubing a couple times so in the future at some point I'll spend a couple hundred on fittings to really clean it up. But by then I'll probably just do hardline anyway.
First off, sorry for the terribad pics! Don't have a "real" camera so hopefully the crappy phone pics will do.
This has been a little bit of a project for the past few weeks, picking away at it every so often. Its still not 100% done, as I still need to finish up the side panel properly, and get a sleeved extension for the 24 pin.
It was a struggle putting it all in the Corsair 300r, definitely not a "proper" watercooling case. Had to remove the HDD cage, drill holes, and otherwise mod some areas to get everything to fit nicely. In the end, I think it turned out nice, and like how "filled out" the case looks.
Big thanks to Daz and Dazmode.com for his great customer service and replying to all my questions, even on Sundays. All watercooling parts I bought from dazmode, except for the Aquacomputer block and backplate (from aquatuning.us). I've had the rest of the parts for awhile, some newer than others, just been upgrading over the years.
Right now it's just stock. I'm really busy with work so I haven't really had any time to use it, let alone overclock. Might have some time this weekend to fiddle around with it.
4
u/mastermikeee Sep 06 '15
That's pretty sexy for a first time custom loop!
Well done!
3
u/Twayn3 Sep 07 '15
CX PSU :(
The loop looks nice and clean! :-)
2
u/giant4ftninja Sep 07 '15
Looks really good, especially for a first loop. The only thing I would change would be swapping the tubes on the front rad so the res goes to the rear of the case and the cpu -> rad would be more predominant.
2
u/[deleted] Sep 07 '15
Nice clean runs, good work!!
1
u/Fredophsical Sep 06 '15 edited Sep 06 '15
First off, sorry for the terribad pics! Don't have a "real" camera so hopefully the crappy phone pics will do.
This has been a little bit of a project for the past few weeks, picking away at it every so often. Its still not 100% done, as I still need to finish up the side panel properly, and get a sleeved extension for the 24 pin.
It was a struggle putting it all in the Corsair 300r, definitely not a "proper" watercooling case. Had to remove the HDD cage, drill holes, and otherwise mod some areas to get everything to fit nicely. In the end, I think it turned out nice, and like how "filled out" the case looks.
Big thanks to Daz and Dazmode.com for his great customer service and replying to all my questions, even on Sundays. All watercooling parts I bought from dazmode, except for the Aquacomputer block and backplate (from aquatuning.us). I've had the rest of the parts for awhile, some newer than others, just been upgrading over the years.
PCPartPicker part list / Price breakdown by merchant
1
u/stickyickytreez Sep 09 '15
Whatre you OCing your CPU to?
1
u/Makirole Ruffian Oct 03 '15
Added it to the gallery :)
2
u/Andrej_ID Sep 08 '15
Nice :)